ROTHENBERGER SV15-22-28 Press Jaw Set Instruction Manual
- August 5, 2024
- Rothenberger
Table of Contents
PRESSBACKEN / PRESS JAWS
Standard & Compact
Instructions for use
RO SERVICE+: + 49 (0) 61 95/ 800 8200
+ 49 (0) 61 95/ 800 7491 service@rothenberger.com – www.rothenberger.com
Operating
[1]
Standard Compact
a: F max. 32-34 kN
b: F max. 19-20 kN
[2]
[3]
Markings in this document:
Danger!
This sign warns against the danger of personal injuries.
Injury / Crushing.
Danger!
Possible hazard from chipping.
Caution!
This sign warns against the danger of property damage and damage to the
environment. Important note: Failure to comply can lead to malfunctions.
Caution!
Use eye protection.
Failure to comply can result in health damage.
Caution!
Read and follow the operating manual.
Caution!
Visual inspection.
Intended use
ROTHENBERGER Standard pressing jaws are exclusively intended for use with ROTHENBERGER pressing tools as well as with pressing units with compatible jaw holders and a constant axial thrust of 32 to 34 kN (Standard pressing jaws), 19 to 20 kN (Compact pressing jaws). Any other use or uses which go beyond this are not valid for intended use. ROTHENBERGER will not be liable for any damage resulting from invalid use. The user will be solely responsible for the risk. Another component part of the intended use is the reading and following of the Operating Instructions and the Inspection and Maintenance Conditions.
Operating
The jaw may only be operated by qualified specialist craftsmen from the sanitation/heating/air conditioning area after successful training.
Inspection: After 10.000 pressings / 12 months.
Maintenance: We recommend that repairs be done only by our authorized service facilities. Have your jaw checked at the latest 1 year after the purchase or after 10.000 pressings (according to which occurs first) by an authorised ROTHENBERGER testing centre, and repeat these checks at the latest 1 year or another 10.000 pressings after the previous inspection. During inspection the press jaws are checked for operating and functional safety and wear parts (e.g. springs) are exchanged. Jaws which are functionally and operationally safe are returned to you.
Caution: The nominal width and the pressing contour of the fittings must match the nominal with and contour of the press chain. Non-compliance leads to incorrect compression. Follow the fitting manufacturer’s assembly instructions.
ROTHENBERGER Werkzeuge GmbH
Industriestraße 7
D-65779 Kelkheim / Germany
Telefon +49 6195 / 800 – 0
Telefax +49 6195 / 800 – 3500
Änderungen und Irrtümer vorbehalten rothenberger.com
92605-i7/0921/F&E
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>