SIMIX 2585 Multi Surface Ceramic Clearcoat Instructions
- June 2, 2024
- SIMIX
Table of Contents
SIMIX 2585 Multi Surface Ceramic Clearcoat
You will need:
- Auto scrubber
- 220 grit diamond polishing pad 800 diamond pad
- Buff diamond polishing pad (8500 grit)
- Microfiber flat mop system (Pads are short-looped and laundered)
- SIMIX Multi-Surface Cleaner & Degreaser
- SIMIX Multi-Surface Ceramic Clearcoat
- Distilled or RO water
Densifying and Coating New Polished Concrete Floors with SIMIX Multi-Surface Ceramic Clearcoat
INSTRUCTIONS
Perform standard grinding and polishing to the level desired before densifying.
-
Densify Step 1: After 100-200 grit polish pass, use 4 parts water to 1 part SIMIX Multi-Surface Ceramic Clearcoat. (use distilled or RO water). Apply the solution to the floor, keep floor visibly wet for 10 minutes (density to saturation) let dry and repeat.
SIMIX can take the floor from 400 grit on, eliminating final resin polish passes -
Step 2: Next day wet polish floor with 800 pucks or diamond pads, 4-6 passes both ways.
-
Rinse Step 3: Rinse the floor well using a red pad and one small scoop of SIMIX Multi-Surface Peroxide Cleaner & Degreaser per gallon of water. Let visibly dry.
-
Coat Step 4: Mix 4 parts water to 1 part SIMIX Multi-Surface Ceramic Clearcoat in a pump-up sprayer or equivalent. (use distilled or RO water)
-
Step 5: Spray the floor with the mixture and spread with a laundered looped microfiber pad. Apply thin coats, do not let puddle. Apply a total of 4 coats. Will take 10 to 15 minutes to dry per coat. (Always rinse microfiber flat mop between coats or every 1500 sq. ft. for best results)
Easy Maintenance with SIMIX Multi-Surface Peroxide Cleaner & Degreaser
- For medium levels of dirt use one large scoop per 15 gallons of warm water in an auto scrubber.
- For light level of dirt use 1/2 large scoop per 15 gallons of warm water.
- Use red pads to maintain shine.
- For increased shine use 3000 diamond pads.
- If mopping, use 2 small scoops of SIMIX Multi-Surface Peroxide Cleaner & Degreaser per gallon of warm water for medium dirt levels or use 1 scoop for light levels.
SIMIX Multi-Surface Ceramic Clearcoat is the best coating for concrete of all types: polished, stained, industrial, and outdoor
- Never yellows, cracks, chips or peels
- Strengthens concrete
- Minimizes concrete chipping and spalling
- Creates a moisture barrier that protects concrete from freeze/thaw damage
- Helps concrete resist oil stains
- Slows surface build-up of moss, fungi etc.
- Prevents salt damage in snowy climates
- Extends life of concrete slab by 3-5 years
Concrete considerations
- Every concrete slab is different, from porosity to mix design to use
- Assess carefully to determine best approach
- Test porosity with water test to determine how much coating you will need
- The application process may change after the assessment
- Make any repairs before applying SIMIX
- Many slabs will need to be densified first
- Wait 3-4 hours after densification before introducing water to slab
- Wait 24-48 hours after densification to apply SIMIX Multi-Surface Ceramic Clearcoat as topcoat
SIMIX I KENOSHA, WISCONSIN
info@simixusa.com
simixusa.com