SIMIX 8500 Multi Surface Ceramic Clearcoat Instructions
- June 2, 2024
- SIMIX
Table of Contents
SIMIX 8500 Multi Surface Ceramic Clearcoat
You will need:
- Mop/mop bucket
- 175 RPM floor buffer
- Front-mounted squeegee wet vacuum
- Auto scrubber
- 220#, 800# diamond pads
- Buff diamond polishing pad (8500 grit)
- 2-4 gallon pump-up sprayer
- 18”or 24” microfiber flat mop system (Pads are short-looped and laundered)
- SIMIX Multi-Surface Cleaner & Degreaser
- SIMIX Multi-Surface Ceramic Clearcoat
- Distilled or RO water
Transition VCT to SIMIX Multi-Surface Ceramic Clearcoat
INSTRUCTIONS
The floor must be completely stripped
-
Step 1: Strip floors of all wax. Make sure all edges are done well.
Next steps are done using the auto scrubber -
Step 2: Auto scrub the floor using one large scoop of SIMIX Multi-Surface Peroxide Cleaner & Degreaser per tank of warm water. Make 4 passes using 220 diamond pads. Pick up slurry. This will start to smooth the floor and remove oxidation from years of stripping.
-
Step 3: Auto scrub floor with only 2 small scoops of SIMIX Multi-Surface Peroxide Cleaner & Degreaser per tank full-on scrubber making 4 passes using 800 diamond pads. This will smooth the floor to the point that a nice shine is present. Pick up slurry.
-
Step 4: Auto scrub floor with diamond buff and 2 small scoops of cleaner per tank make 2 passes and pick up water. Let the floor visibly dry.
If the floor is without residue apply Simix Multi-Surface Ceramic Clearcoat. -
Step 5: Shake Simix Multi-Surface Ceramic Clearcoat bottle well. Mix 4 parts water (use distilled or RO water) to one part coating in pump up sprayer. Spray on the floor and apply using a laundered short-looped microfiber flat mop. Rinse mop head after 500 to 1000 sq. ft. of floor in warm clean water. Apply 4 thin coats. Apply each coat after the floor dries. The coating will take from 5 to 15 minutes to dry.
Next day
Clean floor with auto scrubber. 1 large scoop per tank of warm water and
diamond buff pads. Make 2 passes and pick up water. Let visibly dry.
Apply 4 – 8 coats
For maximum shine, base coating for grocery stores should be 8 to 12 coats.
The floor will increase in shine over the coming weeks with daily auto
scrubbing using diamond buff pads. Try to use diamond buff pads 3x-5x per week
for a maximum clean and shiny floor.
SIMIX I KENOSHA, WISCONSIN
info@simixusa.com
simixusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>