SIMIX Multi Surface Ceramic Clearcoat High Shine Ceramic Floor Coating Instructions
- June 2, 2024
- SIMIX
Table of Contents
SIMIX Multi-Surface Ceramic Clearcoat High Shine Ceramic Floor Coating
Transitioning Polished Concrete, Cementitious and Epoxy Terrazzo to SIMIX Multi-Surface Ceramic Clearcoat. Watch our video that shows the process of transitioning epoxy terrazzo from traditional floor finish to SIMIX Multi- Surface Ceramic Coating. With SIMIX you never strip again and you eliminate daily burnishing. The most important part of the transition process is surface prep. SIMIX is extremely thin and the surface must be completely stripped and smooth for the coating to work properly. If the floor is not smooth refer to the instruction sheet on how-to-smooth concrete floors.
You will need
- 175RPM floor buffer or auto scrubber 220# grit diamond pad
- Buff diamond polishing pad (8500 grit) 2-gallon pump-up sprayer
- 18” or 24” microfiber flat mop system
- (Pads are short-looped and laundered)
- SIMIX Multi-Surface Cleaner & Degreaser
- SIMIX Multi-Surface Ceramic Clearcoat
- Distilled or RO water
INSTRUCTIONS
Step 1: Strip floors of all wax. Make sure all edges are done well. The
next steps are done using the auto scrubber
Step 2: Auto scrub the floor using one large scoop of SIMIX Multi-Surface
Peroxide Cleaner & Degreaser per tank of warm water. Make 4 passes using 220
diamond pads. Pick up slurry.
Step 3: Auto scrub floor with diamond buff and 2 small scoops of cleaner
per tank. Make 2 passes and pick up water. Let the floor visibly dry.
Coat The Floor
Prepare SIMIX Multi-Surface Ceramic Coating. Refer to Mixing/Dilution charts
(sheet)
Step 1: Use a looped microfiber flat mop to apply to the floor. Rinse
flat mop with water between coats.
Step 2: Allow the floor to dry between coats. SIMIX coating dries
quickly.
Step 3: Apply 4 coats.
Wait Over Night
Step 1: Clean the floor with 800 diamond pads. Use a solution of warm
water and 1 large scoop of SIMIX Multi-Surface Peroxide Cleaner & Degreaser
per auto scrubber tank.
Step 2: Apply 6-8 more coats. (SIMIX Multi-Surface Ceramic Coating)
Step 3: Maintain a clean and shiny floor by auto scrubbing with SIMIX
Multi-Surface Peroxide Cleaner & Degreaser and 8500 buff diamond pads.