sw-motech BC.HTA.29.981.30000 Side Case Set Installation Guide

BC.HTA.29.981.30000/B
contient
contiene
HTA.29.981.10000
HTA.29.981.11000
BC.HTA.00.677.10000L/B
BC.HTA.00.677.10000R/B

MOUNTING INSTRUCTIONS

URBAN ABS side case

Thank you for choosing this premium product from SW-MOTECH. Please visit our webshop for additional information, such as application charts and PDF mounting instructions. Any other documents that may be required (e.g. ABE certifications) are also available for download at our webshop.
Installation and/or maintenance of this product require good technical understanding! For your own safety, SW-MOTECH recommends having installation and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay attention to all relevant information in the vehicle manual during assembly. Nonconformance can lead to vehicle damage or even endanger the driver! These mounting instructions are written based on our current state of knowledge. Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting. Compatibility with original accessory parts or other manufacturers’ accessory parts is not guaranteed. Furthermore, BEFORE installing this product, make sure that all moving parts (e.g. the chain) are in the original state of maintenance. Installed accessories can change the driving behavior and/or stability of your vehicle.

GENERAL INFORMATION

Observe the country-specific regulations concerning vehicle registration/operation as well as TUV regulations if applicable. If required, register installed parts in the vehicle documents through an appropriate inspection authority.
PREPARATION:  Read the mounting instructions carefully and make sure that all items on the parts list are included. Make sure that your vehicle is parked safely and cannot fall over. Turn off the engine and remove the ignition key. Let the motor/exhaust cool off if necessary. Disconnect the vehicle battery when working on the electrical system. Use appropriate tools. Have another person to help you.
FUNCTION CHECK: This is a universal product. For this reason make sure BEFORE the first use, that the product can be fixed properly and used without problems with your vehicle type.  After fixation also makes sure that no moving parts are obstructed and the function of the vehicle is not hindered in any way. Lamps as taillight and turn signals must not be limited in their function. Cables and hoses must not rub and/or be pinched. Before starting to ride, perform a comprehensive check of all functions.

PRODUCT SPECIFIC INFORMATION
ATTENTION: Riding with this product may affect the motorcycles driving and braking performance!
ATTENTION: Depending on the location of fixation, cornering and ground clearance can be reduced by using this product!
ATTENTION: Before riding and at each stop (every 200 km) check the proper fixation of the product!

ATTENTION:  The maximum vehicle load specified by the manufacturer must not be exceeded!
  ATTENTION
NOT FOR OFFROAD USE!

SW-MOTECH GmbH & Co. KG
Entered 8/10
35282 Rauschenberg Germany
Tel/phone + 49 (0)6425 / 8168 – 050
Fax/fax + 49 (0)6425 / 8168 – 10
infofasw-motech.com www.sw-motech.com errors and omissions excepted. Technical and design modifications are subject to change.

PARTS LIST

Schritt  Step| Nr.
No.| Art.-Nr. / Bezeichnung
Item No. / Description| Artikel| Part| Anzahl
Quantity”| **Nm *
---|---|---|---|---|---|---
| | BC.HTA.00.677.10000L/B| URBAN ABS Seitenkoffer links| URBAN ABS side case left| 1/1|
1| 1| BC.HTA.00.677.10000L/B| URBAN ABS Seitenkoffer links| URBAN ABS Side Case left| 1/1|
2| 2| BC.LOC.00.001.10200/B| Motorradtaschen-Schloss| Lock for Motorcycle Luggage| 1/1|
3| 3| BC.ZUB.00.064.30000| Wasserdichte Innentasche| Waterproof Inner Bag| |
| | BC.HTA.00.677.10000R/B case right| URBAN ABS Seitenkoffer rechts| **URBAN ABS side case right| |
1| 1| BC.HTA.00.677.10000R/B| URBAN ABS Seitenkoffer rechts| URBAN ABS Side Case right| 1/1|
2| 2| BC.LOC.00.001.10200/B| Motorradtaschen-Schloss| Lock for Motorcycle Luggage| 1/1|
3| 3| BC.ZUB.00.064.30000| Wasserdichte Innentasche| Waterproof Inner Bag| 1/1|

• All measurements in millimeters.
  • The second number indicates the total quantity of the part in the delivery.
  * No torque specifications: Use the torque defined by the vehicle manufacturer!  The standard torque in this table can be used as long as it is within the vehicle manufacturer’s specifications.
  CARE
  Care To clean the side case, use warm, soapy water and a soft, clean cloth. Rinse with clean water. Do NOT use strong cleaning agents, rough cleaning tools, or a high-pressure washer! Clean the side case after riding in salty conditions, to avoid damage from salt. Hard-to-open zippers can be loosened with a small amount of talcum powder.  ATTENTION:   Surface materials can experience color changes or fading when exposed to direct sunlight for extended periods of time and by environmental factors (e.g., SMOG, acid rain, etc.)! SW-MOTECH assumes no liability for this.

MOUNTING

Place the three locking openings of the side case onto the guide bolts of the mounted SLC side carrier. Then press the side case slightly downward, until it properly rests on the SLC side carrier.
ATTENTION:  Make sure that all three guide bolts engage at the same time! Pay attention to the clearly audible snap sound of the locking mechanism and that the red marking under the slider is not visible!
To release press the slider downward.
ATTENTION:  All components of the side case must not contact any hot or moving parts of the vehicle! All parts should also remain 5 cm away from hot parts of the vehicle and remain clear of the exhaust stream! After mounting, make sure there are no clearance issues while the suspension is both compressed and extended.

Open the mounted side case (1) to protect it against theft.
Now press the locking button and turn it according to the arrow mark until the locking button engages.
Then lock the closed zipper with the included lock (2) We recommend leaving the locking button in the closed position during the ride.

Use the included waterproof inner bag (3) to protect your luggage from moisture.

For easier loading of the side case (1), open the buckles and hook and loop fasteners of the opening reductions, as shown in the drawing.

ATTENTION:  Make sure weight is evenly distributed between the left and right sides if you want to use both side cases! Make sure that the loading is secured against shifting during the ride!
ATTENTION:  Never store pointy or sharp-edged objects, which could cause injury to persons or damage to the vehicle/side case!

Errors and omissions excepted. Technical and design modifications are subject to change
Copyright by
SW-MOTECH Gmbh&Co.KG

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>