intempo LED Cube Speaker Instruction Manual
- May 15, 2024
- intempo
Table of Contents
www.intempo.co.uk LED CUBE SPEAKER
ENCEINTE CUBE LED
INSTRUCTION MANUAL
Description of Parts
- LED Cube Speaker main unit
- Speaker
- Power/function dial (ON/OFF/FUNCTION)
- Skip back button (-)
- Skip forward button (+)
- LED indicator light
- Colour changing LED lights
- Type-C USB 5 V === charging port
- USB port
- TF card slot
- Type-C to USB charging cable
- Carry handle
Type-C USB end of the USB charging cable into the Type-C 5 V charging port on the speaker and the other end fo a compatible USB port. Whilst charging, the LED indicator light will illuminate red. Once the battery has fully charged, the LED indicator light will switch off. Carefully disconnect both ends of the USB charging cable and store it safely for future use.
Using the LED Cube Speaker Basic Functionality
Turn on the speaker by pressing and holding ‘ON/OFF/FUNCTION’ for approx. 2
seconds.
Pause a track by pressing ‘ON/OFF/FUNCTION’; push it again fo resume the
track.
To switch fo the next irack; press +’ once. Play the previous track by
pressing ‘~ once. To adjust the volume of the speaker, use the
‘ON/OFF/FUNCTION’ dial. Turn clockwise to increase the volume; turn anti-
clockwise to decrease the volume.
Double press ‘ON/OFF/FUNCTION’ to cycle through the various modes.
The colour changing LED lights will automatically activate when the speaker is
turned on. Triple press ‘’ON/OFF/FUNCTION’ o cycle through the different
colour options. The last colour option will switch off the lights.
Press and hold ‘ON/OFF/VOLUME’ for approx. 2 seconds fo furn the speaker off.
Please retain instructions for future reference.
Safety Instructions
When using electrical products, basic safety precautions should always be
followed.
Keep the product and its accessories out of the reach of children.
Keep small parts away from children as these may present a choking hazard.
Children under 8 years should be supervised to ensure that they do not play
with the product.
This product is not a toy.
This product contains no user serviceable parts. If the product and any of ifs
accessories are malfunctioning or damaged, the unit should be recycled.
Keep the product and ifs accessories away from heat sources, direct sunlight,
humidity, water and any other liquid, or sharp edges that could cause damage.
Ensure the produc is well-ventilated.
Do not leave any objects susceptible to magnetism (cash cards etc.) near the
product.
Do not operate the product with wet hands.
Do not operate the product if it has been exposed fo water, moisture or any
other liquid, fo prevent against electric shock, explosion and/or injury to
yourself and damage fo the product.
Do not use the product for anything other than its intended use.
Do not use any accessories other than those supplied.
Modes
The speaker must be turned on before using any of the following modes.
Bluetooth Mode Pairing with a Bluetooth Compatible Device
STEP 1 : Once the speaker has been furned on, a voice will sound to
signal that it is ready to be paired with a Bluetooth compatible device.
STEP 2: Search for the speaker using a Bluetooth compatible device.
Select ‘EE7376″ o connect and pair. Once @ connection has been made, a voice
willsound to signal that the devices are paired.
STEP 3 : To unpair or remove a Bluefooth compatible device from the
speaker, turn off the Bluetooth function on the compatible device. The speaker
can now be paired with a new compatible device.
NOTE: Once connected, volume can be controlled using either the speaker
or the relevant controls on the Bluetooth compatible device. Turn
‘ON/OFF/FUNCTION’ to 100 % and the volume can then be controlled using the
Bluetooth compatible device.
TF Card/USB Mode
STEP 1: To use TF card mode, insert a TF card (not included) into the TF
card slot. The speaker will automatically change to TF card mode.
Do not put objecis into any of the openings.
This product is intended for domestic use only. It should not be used for
commercial purposes.
To prevent possible hearing damage, do not listen at high volume levels for
long periods of time — this may also damage the product.
NOTE: It is advised that the product is not used whilst charging, as this
could reduce the life of the battery.
Battery Safety
The supply terminals are not fo be short-circuited.
In the event of a battery and cell leaking, do not allow the liquid o come in
contact with the skin or eyes. If contact has been made, wash the affected
area with copious amounts of water and seek medical advice. Secondary cells
and batteries need fo be charged hefore use. After extended periods of
storage, it may be necessary to charge and discharge the cells or batteries
several fimes fo obtain maximum performance. Keep batteries out of the reach
of children. Do not crush, puncture, dismantle or otherwise damage batteries.
Do not store above 60 °C. Avoid storage in direct sunlight. Do not dispose of
exhausted batteries in household waste. Do not expose the batteries to heat or
fire as they may explode.
STEP 2: To use USB mode, insert a compatible USB drive into the USB input
port. The speaker will automatically change to USB mode.
STEP 3: If the speaker does not automatically change to TF card/USB
mode, double press’ON/OFF/FUNCTION’ until the desired operation is selected.
NOTE: Once connected, sound can be controlled using the speaker.
No USB drive should be inserted whilst using TF card mode or vice versa, as
this could inferfere with playback. The speaker will only recognise MP3 audio
files; if other files are present on the TF card or USB drive, this may
prevent the speaker from playing.
Aux. Mode
STEP 1: Connect one end of the line-in Aux. cable to the Aux. input port
on the speaker and the other end to a compatible audio source. The speaker
will automatically switch o Aux. mode once the line-in Aux. cable has been
inserted.
STEP 2 : If the speaker does not automafically change o Aux. mode, press
‘ON/OFF/FUNCTION’ twice until the desired operation is selected.
NOTE: Once connected, volume can be controlled using the relevant
controls on the compatible device.
The speaker cannot be used fo skip tracks during Aux. mode.
Once the hatteries have been exhausted, dispose of the product at a local
recycling stafion. Contact the local government offices for further details.
This produc is fitted with a 3.7 V 1200 mAh lithium ion rechargeable battery
(non-removable).
Disposal of Waste Batteries and Electrical and Electronic Equipment
This symbol on the produdt, its batteries or its packaging means that this product and any batteries it contains must not be disposed of with household waste. Instead, it is the user’s responsibility to hand this over o an applicable collection point for the recycling of batteries and electrical and electronic equipment. This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due fo the possible presence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. Some refailers provide fake-back services which allow the user fo return exhausted equipment for appropriate disposal. It is the user’s esponsibility fo delete any data on electrical and electronic equipment prior fo disposal. For more information about where to drop batteries, eledrical and electronic waste off, please contact the local city/municipality office, household waste disposal service, or the retailer.
Troubleshooting
The speaker has no power.
The speaker has run out of charge. Charge the speaker following the
instructions in the section entitled ‘Charging the Battery”.
The speaker has no sound.
The volume level is set too low. Check that the volume level is st at an
audible level and adjust accordingly with both the connected device and the
speaker.
The speaker is not paired with a Bluetooth compatible device. Follow the
instructions in the section entiled ‘Bluetooth Mode’.
Unable to pair a device with the speaker.
The Bluetooth device is not compatible with the speaker. Check that the
Bluetooth device is compatible with the speaker and that the Bluetooth
funcfion is switched on.
The speaker is already connected to another device. Tum Bluetooth off on the
device and try connecting again.
The charge of the speaker depletes quickly.
The volume level is set too high. Excessive use of the speaker at high volumes
will drain the battery quickly. Charge the speaker following the instructions
in the section enfitled ‘Charging the Battery’ and listen at a lower volume
for better resulfs.
The battery may be reaching the end of its service life and the speaker will
need to be disposed of. See
Declaration of Conformity
UP Global Sourcing UK Ltd. hereby declares that this product is in compliance
with the essential requirements and other provisions of directive 2014/53/EU.
The declaration of conformity may be consulted at UP Global Sourcing UK Ltd.,
Victoria Street, Manchester OL9 0DD. UK. Edmund-Rumpler Strafe 5, 51149 Kéln.
Germany. or https://www.intempo.co.uk/declaration-letters.html.
Model No. EE7376
Care and Maintenance
Wipe the speaker with a soft, lint-free cloth.
DO NOT:
Use any abrasive cleaning solvents to clean the speaker.
Expose the speaker to extremely high or low temperatures.
Drop the speaker.
Attempt fo disassemble the speaker.
Dispose of the speaker in a fire, as it will result in an explosion.
Instructions for Use Charging the Battery
The speaker is fitted with a 3.7 V 1200 mAh lithivm ion rechargeable battery
(non-removable). It is recommended that the battery is fully charged before
first use; this will take approx. 3 hours. Connect the the section entitled
‘Battery Safety’.
Specifications
Product code: EE7376
Bluetooth version: 5.3
Wireless range: Up fo 25 m*
Speaker output: 10 W
Power supply: 5 V===
Working voltage: 3.7 V
Rechargeable battery: 1200 mAh
Operating frequency: 2.4-2.8 GHz
Max RF output: < 10 dBm
“Effective range may be reduced due fo the presence of obstacles between
connected devices.
The Bluetooth® word, mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks are under license. Other
trademarks and trade names are those of their respective owners.
Manufactured by / Fabriqué par:
UP Global Sourcing UK Ltd.,
Victoria Street, Manchester OL9 ODD. UK.
Edmund-Rumpler StraBe 5, 51149 Kéln. Germany.
Made in China.
©lntempo trademark. All rights reserved.
www.intempo.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>