SuperATV Polaris General 1000 Primal Soft Cab Enclosure Upper Doors Installation Guide
- October 27, 2023
- SUPERATV
Table of Contents
Polaris General 1000 Primal Soft Cab Enclosure Upper Doors
Installation Guide
Polaris General 1000 Primal Soft Cab Enclosure Upper Doors
INSTALLATION INSTRUCTIONS Soft Cab – Upper Door Kit: for Polaris ® General™4
Notes:
– Hook and Loop Fasteners should be applied at a temperature of 70°F or above.
– Use Denatured Alcohol and thouroughly clean any area where Hook and Loop
Fasteners will be installed.
– Installing and adjusting Soft Cab is easier with two people.
– When cleaning Soft Cab, use soap and water only. Do not use detergent,
window cleaner, solvents.
– Do not use a dry cloth or rag on windows.
– Do not fold Soft Cab before storing. Zip windows closed and roll Soft Cab to
store.
– Do not discard packaging until product has been successfully installed.
– Doors may be secured with Snaps only, Hook and Loop Fastener only, or a
combination of Snaps and Hook and Loop Fastener.
– Any whiteness, clouding, wrinkles, or waves that develop will gradually
disappear when Soft Cab is exposed to sunlight and/or heat. Use a heat gun or
hair dryer to speed up this process. Do not overheat or heat in one area for
an extended period of time.
– Windows must be rolled up when trailering machine.
Read instructions and view illustrations before beginning.
Liability Statement
SuperATV’s ® products are designed to best fit user’s ATV/UTV under stock
conditions. Adding, modifying, or fabricating any factory or aftermarket parts
will void any warranty provided by SuperATV ® and is not recommended.
SuperATV’s ® products could interfere with other aftermarket accessories. If
user has aftermarket products on machine, contact SuperATV ® to verify that
they will work together. Although SuperATV ® has thousands of satisfied
customers, user should be aware that installing lift kits, long travel, or
suspension kits, tires, etc. will change the ride of machine and may increase
maintenance and part wear.
Operating any off-road machine while, or after, consuming alcohol and/or drugs
increases risk of bodily harm or death. No warranty or representation is made
as to this product’s ability to protect user from severe injury or death.
SuperATV ® urges operators and occupants to wear a helmet and appropriate
riding gear at all times. By purchasing and installing SuperATV ® products,
user agrees that should damages occur, SuperATV ® will not be held responsible
for loss of time, use, labor fees, replacement parts, or freight charges.
SuperATV ® , nor any 3rd party, will not be held responsible for any direct,
indirect, incidental, special, or consequential damages that result from any
product purchased from SuperATV ® .
The total liability of seller to user for all damages, losses, and causes of
action, if any, shall not exceed the total purchase price paid for the product
that gave rise to the claim. SuperATV ® will warranty only parts provided by
SuperATV ® . Any damage or problems with OEM housings, bearings, seals, or
other manufacturers’ products will not be covered by SuperATV ® . SuperATV ®
parts and products are not warrantied if item was not installed properly,
misused, or modified. Installing, adding, modifying, or fabricating any
factory or aftermarket product to your ATV/UTV may violate certain local,
state, and federal laws. Be advised that laws vary depending on town, city,
county, state, etc. Use of certain products on public streets, roads, or
highways may be in violation law. The Buyer is solely and exclusively legally
and personally responsible for any violation of the law by the installation or
use of the product. You must abide by all local, state, and federal laws,
including but not limited to vehicle safety, traffic laws, and ordinances. It
is your responsibility to know the laws and how they apply to you.
The Buyer is responsible to fully understand the capability and limitations of
his/her vehicle according to manufacturer specifications, warnings and
instructions and agrees to hold SuperATV ® harmless from any damage resulting
from failure to adhere to such specifications, warnings and/ or instructions.
The Buyer is also responsible to obey all applicable federal, state, and local
laws and ordinances when operating his/her vehicle while using this product,
and the Buyer agrees to hold SuperATV ® harmless from any violation thereof.
Install Hook and Loop Fastener and install to Cage.
– Install Hook and Loop Fastener and install to Cage.
wait 15 – 30 minutes for adhesive to setup
– Place Soft Cab onto machine.
– Align Soft Cab to machine.
– Loosely secure Straps.
– Loosely secure Straps.
– Secure Flaps to Hook and Loop. Cinch Straps tight.
If Soft Cab is to be secured with Snaps, go to pages 9 – 10.
– Install Hook and Loop to Body.
Snaps installation
– Outline Snap with a paint marker, lipstick, or marker.
– Keep Door tight, press Snap onto Body or Velcro and mark location.
– Install provided Snap.
– Repeat for remaining Snaps.
– Secure Door to Snaps.
Snaps installation continued
– Repeat for remaining Snaps.
– Secure Door to Snaps.
Repeat steps for opposite side
Need help with your installation?
sales@superatv.com
www.superatv.com
**1-855-743-3427
8:00am – 8:00pm EST M-The
8:00am – 7:00pm EST Friday
9:00am – 2:00pm EST Saturday
© 2022SuperATV.com ® All Rights Reserved.**
Documents / Resources
|
SuperATV Polaris General 1000 Primal Soft Cab Enclosure Upper
Doors
[pdf] Installation Guide
Polaris General 1000 Primal Soft Cab Enclosure Upper Doors, 1000 Primal Soft
Cab Enclosure Upper Doors
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>