Intempo EE3726WHTSTKEU7 Bluetooth Mirror Speaker Instruction Manual
- May 15, 2024
- intempo
Table of Contents
Intempo EE3726WHTSTKEU7 Bluetooth Mirror Speaker
Description of Parts
- Bluetooth® Mirror Speaker main unit
- Speakers
- Mirror
- Storage tray
- LED lights
- On/Off switch
- Touch button
- Power ( )
- Play/Pause/Hands-free ( )
- Skip/Volume + ( )
- Skip/Volume – ( )
- 5 V 1 A charging port
- LED indicator light
- Micro USB charging cable
Please retain instructions for future reference.
Safety Instructions
- When using electrical products, basic safety precautions should always be followed.
- Keep the product and its accessories out of the reach of children.
- Keep small parts away from children as these may present a choking hazard.
- Children under 8 years should be supervised to ensure that they do not play with the product.
- This product is not a toy.
- If the power supply cord, plug or any part of the appliance is malfunctioning or if it has been dropped or damaged, cease using the product immediately to avoid potential injury.
- This appliance contains no user serviceable parts, only a qualitied electician should carry out repairs. Improper repairs may place the user at risk of harm.
- Keep the product and its accessories away from heat sources, direct sunlight, humidity, water and any other liquid, or sharp edges that could cause damage.
- Ensure the product is well-ventilated.
- Do not leave any objects susceptible to magnetism (cash cards etc.) near the product.
- Do not operate the product with wet hands.
- Do not operate the product if it has been exposed to water, moisture or any other liquid, to prevent against electric shock, explosion and or injury to yourself and damage to the product.
- Do not use the product for anything other than its intended use.
- Do not use any accessories other than those supplied.
- Do not put objects into any of the openings.
- This product is intended for domestic use only. It should not be used for commercial purposes.
- To prevent possible hearing damage, do not listen at high volume levels for long periods of time – this may also damage the product.
NOTE: It is advised that the product is not used whilst charging, as this could reduce the life of the battery.
Battery Safety
- The supply terminals are not to be short-circuited.
- In the event of a battery and cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical
- advice.
- Secondary cells and batteries need to be charged before use. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
- Keep batteries out of the reach of children.
- Do not crush, puncture, dismantle or otherwise damage batteries.
- Do not store above 60 °C.
- Avoid storage in direct sunlight.
- Do not expose batteries to heat or fire as they may explode.
- Do not subject batteries to mechanical shock.
- Do not dispose of exhausted batteries in household waste.
- Once the batteries have been exhausted, dispose of the unit at a local recycling station. Contact the local government offices for further details.
- This unit is fitted with a 3.7 V 1200 mAh Li-ion rechargeable battery (non-removable).
Disposal of Waste Batteries and Electrical and Electronic Equipment
This symbol on the product, its batteries or its packaging means that this
product and any batteries it contains must not be disposed of with household
waste. Instead, it is the user’s responsibility to hand this over to an
applicable collection point for the recycling of batteries and electrical and
electronic equipment. This separate collection and recycling will help to
conserve natural resources and prevent potential negative consequences for
human health and the environment due to the possible presence of hazardous
substances in batteries and electrical and electronic equipment, which could
be caused by inappropriate disposal. Some retailers provide take-back services
which allow the user to return exhausted equipment for appropriate disposal.
It is the user’s responsibility to delete any data on electrical and
electronic equipment prior to disposal. For more information about where to
drop batteries, electrical and electronic waste off, please contact the local
city/ municipality office, household waste disposal service, or the retailer.
Declaration of Conformity
UP Global Sourcing UK Ltd. hereby declares that this unit is in compliance
with the essential requirements and other provisions of directive 2014/53/EU.
The declaration of conformity may be consulted at UP Global Sourcing UK Ltd.,
Victoria Street, Manchester 0L9 ODD. UK. Edmund-Rumpler Straße 5, 51149 Köln.
Germany. or online at http://www.intempo.co.uk/declaration-letters.html.
Model No.: EE3726.
Care and Maintenance
Wipe the mirror speaker with a soft, lint-free cloth and allow to dry thoroughly.
DO NOT:
Use any abrasive cleaning solvents to clean the mirror speaker.
Expose the mirror speaker to extremely high or low temperatures.
Drop the mirror speaker.
Attempt to disassemble the mirror speaker.
Instructions for Use
Charging the Battery
The mirror speaker is fitted with a 3.7 V 1200 mAh rechargeable battery (non-
removable). It is recommended that the battery is fully charged before first
use; this will take approx. 4 hours.
Connect the micro USB end of the USB charging cable into the 5 V I A charging
port on the speaker and the USB end to a compatible USB port.
Whilst charging, the LED indicator light will illuminate red. Once the battery
has fully charged, the LED indicator light will switch off.
Carefully disconnect both ends of the USB charging cable and store it safely
for future use.
Using the Bluetooth® Mirror Speaker
Basic Functionality
- Turn on the mirror speaker by sliding the on/off switch to the ‘On’ position.
- Turn on the mirror speaker’s Bluetooth function by pressing and holding ‘ ‘ for approx. 3 seconds.
- Pause a track by pressing ‘ ‘; press it again to resume the track.
- Adjust the volume of the speaker using ‘ ‘ and ‘ ‘. Hold’ ‘ to increase the volume; decrease the volume by pressing and holding ,
- Switch to the next track by pressing ‘ ‘; play the previous track by pressing ‘ ‘.
- Turn on the LED lights by pressing the touch button; press it again to turn the LED lights off.
- Press and hold the touch button to adjust the brightness of the LED lights.
- Press and hold ‘ ‘ to turn the mirror speaker’s Bluetooth function off.
- Slide the on/ off switch to the ‘Off’ position to turn the mirror speaker off.
Modes
The mirror speaker must be turned on before using any of the following modes.
Bluetooth Mode
Pairing with a Bluetooth-Compatible Device
STEP 1: Once the mirror speaker has been turned on, the LED indicator light will flash blue to signal that the mirror speaker is ready to be paired with a Bluetooth-compatible device.
STEP 2: Search for the mirror speaker using a Bluetooth-compatible
device. Select ‘EE3726’ to connect and pair.
Once a connection has been made, the LED indicator light will flash blue
slowly to signal that the devices are paired.
STEP 3: To unpair or remove a Bluetooth-compatible device from the speaker, turn off the Bluetooth function on the compatible device. The mirror speaker can now be paired with a new compatible device.
NOTE: Once connected, sound can be controlled using either the mirror
speaker or the relevant controls on the Bluetooth-compatible device.
Making Phone Calls via a Bluetooth Compatible Device
Once the Bluetooth-compatible device has been paired with the speaker, phone calls can be made.
STEP 1: Using the Bluetooth-compatible device, dial the number to be called and select the Bluetooth/hands-free option. The mirror speaker and its built-in microphone will now act as a hands-free device.
STEP 2: To connect or disconnect a call, press .
STEP 3: Reject an incoming call by pressing and holding ‘ ‘ for approx. 2-3 seconds.
STEP 4: The volume of the phone call can be controlled using either the mirror speaker or the Bluetooth-compatible device.
STEP 5: Pressing ‘ ‘ twice will redial the last number called from the Bluetooth-compatible device.
Storage
Check that the mirror speaker is clean and dry before storing in a cool, dry
place.
Troubleshooting
The mirror speaker has no power.
The mirror speaker has run out of charge. Charge the mirror speaker following
the instructions in the section entitled ‘Charging the Battery’.
The mirror speaker has no sound.
The volume level is set too low. Check that the volume level is set at an
audible level and adjust accordingly.
The mirror speaker is not paired with a Bluetooth compatible device. Follow
the instructions in the section entitled ‘Bluetooth Mode’.
Unable to pair a Bluetooth device with the mirror speaker.
The Bluetooth device is not compatible with the speaker. Check that the
Bluetooth device is compatible with the mirror speaker and that the Bluetooth
function is switched on.
The charge of the mirror speaker depletes quickly.
The volume level is set too high. Excessive use of the mirror speaker at high
volumes will drain the battery quickly. Charge the mirror speaker following
the instructions in the section entitled ‘Charging the Battery’ and listen at
a lower volume for better results.
The battery may be reaching the end of its service life and the unit will need
to be disposed of. See the section entitled ‘Battery Safety’.
Specifications
- Product code: EE3726
- Bluetooth version: 5.3
- Wireless range: Up to 25 m”
- Speaker output: 2 x 3 W
- Power supply: 5 V 1 A
- Rechargeable battery: 1200 mAh
- Frequency response: 150 Hz-20 kHz
- Operating frequency: 2.4 GHz
- Max RF output: < 6 dBm
“Effective range may be reduced due to the presence of obstacles between connected devices.
Manufactured by
Made in China.
OIntempo trademark. All rights reserved.
www.intempo.co.uk