TOZO T11054 True Wireless Earbuds User Manual
- June 13, 2024
- TOZO
Table of Contents
- TOZO T11054 True Wireless Earbuds
- Truly Wireless Environmental Noise Cancellation Technology
- Specifications
- Overview and Packing List
- Earbuds Function Diagram
- PowerON/OFF
- Earbuds Pairing
- Bluetooth Pairing
- Hall Sensor Function
- Touch Operation
- Indicator Status
- TOZO App
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TOZO T11054 True Wireless Earbuds
Thanks for Choosing Our Products
ENC earbuds provide you with an extraordinary experience Of stable voice calls
with fashionable and multiple functions, making them a great choice for you
while working going out, and driving.
Truly Wireless Environmental Noise Cancellation Technology
With the technology of earbuds, you can select compatible communication devices without using cables. Earbuds don’t require keeping the phone facing earphones directly, but the maximum distance between them should not exceed 12 meters(about 39 steps). Environmental Noise Cancellation, which can effectively inhibit 90% of the reverse environmental noise, thus reducing the environmental noise, up to 35dB, so that the game players can more freely voice communication. Through the double microphone array, the speaker’s speaking position can be accurately calculated which can not only protect the target voice in the main directions but also remove various interference noises in the environment, so as to benefit the other party during the conversation.
Specifications
- Model No. : Tl 1054
- Impedance: 32Q
- Frequency Range: 20Hz-20,000Hz
- Charging Port: Type-C/Wireless Charging
- Play MusiC Time: 8B
- Earphone Battery Capacity: 48mAh*2
- Charging Bax Battery Capacity: 500mAh
- Charging Time of earphone: 1.5H
- Charging Time of charging box: 21-1
Overview and Packing List
The package contains TOZO Tonal Fits earbuds, a charging box, 6 sizes of ear tips(the M size ear tips are pre-installed on the earphones), Type-C charging cable and instructions.
Earbuds Function Diagram
Touch Control Prompt
- Please use the touching panel to control the earbuds. The sensing area Is located In the earphone handle’s upper part.
Wearing Earbuds
- In order to obtain a better wearing effect the angle can be adjusted appropriately after wearing so that the earbuds slightly pushed into the ear canal
PowerON/OFF
-
Auto power on
Open the covarofth& charge box. The earbuds will power on automatically. -
Auto power off
Close the cover of the charging box, the earbuds will shut down automatically.
Another method of power on/off
- Hold Lor R for 3 seconds will turn on when the earbuds power off.
- Hold Lor R for 8 seconds will turn off when not playing media.
Earbuds Pairing
- In order for convenient use, the pelr1ng batw98n left and right earbuds have been completed before leaving the factory. When opening the cover, earbuds will turn on and pair with each other automatically, then enter connection or pairing status
Bluetooth Pairing
- Open the charging box, and keep the earbuds in the charging box, earbuds will enter pairing status automatically.
- After pairing the left and right earbuds, open the Bluetooth search in the mobile phone and connect the device. Then the mobile phone displays the pairing name as [TOZO Tonal Fits).
- When used again, double earbuds will pair with each other and return to the last pairing device automatically.
- For single earbud use, pick up one side and keep the other side closed in the charging box. When the earbud fails to reconnect to TWS it will enter the reconnecting mode after 2 seconds, then pair coexistence with another device. After connecting the phone, take out another earbud and enter binaural mode automatically.
- If stay in the pairing or reconnecting status for 5 minutes in normal mode, earbuds turn Off automatically.
Note : While the left and right earbuds are disconnected, put the earbuds in the charging box then the left and right earbuds will be paired automatically.
Bluetooth Lost
- Turning off the mobile phone’s earbuds will enter the pairing mode and won’t connect back. If stay in the pairing or reconnecting status for 5 minutes in normal mode, the earbuds turn off automatically.
- If the connection range is exceeded, it will enter the back-connection mode, and then pair with other devicæs at the same time. If stay in the pairing or status for 5 minutes in normal rncxde, earbuds turn off automatically.
Hall Sensor Function
- When the charging case, the earbuds will power on automatically and the digital display screen will turn on for 5 seconds, then turn Off.
- When the charging case, the earbuds will power off automatically and the digital display screen will turn on for 5 seconds, then turn off.
Touch Operation
(Operation in wearing two earbuds) ****(Operation in wearing one earbud)
Calling Control
Voice Assistance
Reset
- Turn Off the bluetooth Of the device. put both Of the earbuds into the charging case and close the lid for a few
- Take them out of the charging case, and the white indicator light of the earbuds will blink slowly-Then double click the touch panel on The sides at the same time, and the indicator light will blink swiftly for about 3 seconds and then turn to slow blink which shows the resetting completely. Then turn on the bluetooth Of the device and connect the earbuds again.
- If the fault persists, please perform the preceding steps again.
Low Battery Alarm
When the Dilttery power Is low, then be reminded once every 10 minutes and the
white light flashes one time every 3 seconds until the Dilttery power runs out
and the earbuds turn off.
Box Wireless Charging
Designed for modern life, you can use either charging cables or a wireless
charging pad for charging, enjoy of unplugged charging, and instant charging.
Display of Charging Box Power
When the charging case, the earbuds will power Off automatically and the
digital display screen will turn on 5 seconds, then turn off.
Earbuds Charging
Put earbuds into the charging Inx to charge automatically.
Indicator Status
TOZO App
Download the TOZO App for UI customization, EQ settings, and more.
- UI customization : Most of the controls can be customized In the App.
- EQ settings: There are lots of EQ settings you can choose in the App to optimize your experience while enjoying different music genres.
- Earbuds firmware update: The earbuds’ firmware can be updated in the App. You will be informed once the new version of firmware Is detected when you con l’\Bct the earbuds with the App.
TOZO App Pairing
-
Step 1:
Download the TOZO App on your phone. -
Step 2:
Bluetooth pairing with your earbuds. -
Step 3:
TOZO App pairing with your earbuds.
FCC ID ; 2ASWH-INA
Note
The equipment has been tested and found to comply with the pursuant to part 15
of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference In a residential Installation. This equipment
generates uses and can radiate radio frequency energy, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications. However, there Is no guarantee that Interference win not
occur In a particular installation. If this equipment does cause harmful
interference to radio or t&levlslon reception, which can be determined by
turning the equipment off and on, the user is encouraged totryto correct-the
lnterterence by one or more of the following measures:
- Fleori&nt or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment Into an outer on a circuit different from that to which the recalls connected
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with pan 15 of the FCC rules. Operation Is subject to the following two conditions:
- (1) This device may not cause harmful interference.
- (2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
com parlance could void the user’s authority to operate the equipment.
Disposal of a battery Into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result In an explosion; Leaving a battery In an
extremely high temperature surrounding environment that can result In an
explosion ortha leakage of n.ammable liquid or gas A battery subjected to
extremely low air pressure that may result in an explosion or the Leakage of
flammable liquid or gas.
Thank you for purchasing the TOZOauthentlc product.
For more latest products, parts and accessories.
plesse visit www.tmoatore.com
For any assistance please C011tect Email:
info@tozostore.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>