Intempo EE5095YBLKSTKEU7V2 Bluetooth Headphones Instruction Manual

October 30, 2023
intempo

Intempo EE5095YBLKSTKEU7V2 Bluetooth Headphones Instruction Manual
Intempo EE5095YBLKSTKEU7V2 Bluetooth Headphones

Description of Parts

Description of Parts

  1. Bluelooth® Headphones
  2. LED indicator light
  3. Skip/volume + button
  4. Skip/volume — button
  5. Play/pause/hands-free button
  6. Built-in hands-free microphone
  7. Micro usb charging port
  8. Aux. Input port
  9. Usb charging cable
  10. Line-in aux cable

Please retain instructions for future reference.

Safety Instructions

When using elecirical producis, basic safely precautions should always be followed.
Keep the produc and fsaccessories out of he reach of hildren.
Keep small parts away from children o these may present a choking hozard.
Children under 8 years should be supervised fo ensure that they do not play with the product.
This product is not o foy.
This product contains no user serviceable ports. If the product and any of its accessories are malfunctioning or domaged; the unit should be recycled.
Keep the product and ifs accessories away from heat sources, direct sunlight, humidity, water and any other
liquid, or sharp edges that could cause domage.
Ensure the product is well ventilated.
Do not leave any objects susceptible to magnetism (cash cards etc.) near the produdt.
Do not operate the product with wet hands.
Do not operate the product if it has been exposed fo water, moisture or any other liquid, o prevent against electric shock, explosion and/or injury fo yourself and damage o the product.
Do not use the product for anything other than its intended use.
Do not use any accessories other than those supplied.
Do not put objects into any of the openings.
This product is intended for domestic use only. It should not be used for commercial purposes.

To prevnt possbie hearing darnoge, do not ften o igh volume vl forlong priods of fime — this may also damage the product.
NOTE: It is advised that the product s fo not be used whilst charging, os this could reduce the life of the battery.

Battery Safety

The supply terminals are not fo be short-circuted. In the event of a battery and cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Secondary cells and batteries need fo be charged hefore use. Afer extended periods of strage, it may be necessary fo charge and discharge the cels or batteries severl fimes fo abtain maximum performance.
Keep otteries out of the reach of children. Do not crush, punciure, dismantle or therwise damage batteries.
Do not store above 60 °C.
Avoid storage in direct sunlight.
Do not dispose of exhausted batteries in household waste.
Do not expose the hatteries fo heat or fire as they may explode.
Once the batteries have been exhausted, dispose of the product af a local recycling stafion. Contact the local government offces for further details.
This product is fitted with a 3.7 V 160 mAh rechargeable Lithiurn-polymer battery (non-removable).

Declaration of Conformity

UP Global Sourcing UK Ltd. hereby declares that this unit is in compliance with the essential requirements and other provisions of directive 2014/53/EU.
The declarafion of conformity may be consulted at UP Global Sourcing UK Ltd., Victoria Street, Manchester 0L9 0DD. UK. or online at www.intempo.co.uk /declaration-letters.himl. Model No.: EE5095.
The Bluetooth® word, mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks are under license. Other trademarks and trade names are those of their respective owners.

Disposal of Waste Batteries and Electrical and Electronic Equipment

This symbol on the produd, its batteries or its packaging means that this product and any W batteries it contains must not be disposed of with household waste. Instead, it is the user’s responsibility fo hand this over to an applicable collecion point for the recydling of batteries and electrcal and elecronic equipment. This separate colleciion and recycling will help o conserve natural resources and prevent pofeniol negative consequences for human health and the environment due to the possible presence of hazardous substances in botteries and electrical and electronic cquipment, which coukl be caused by inappropricte isposal. Some rtailrs proide uke-back sevces which llow the use o reum exhausted equipment for oppropite disosel. It s the user’s responsibility to delete any data on electrical and electronic equipment prior to disposal. For more nformation about where fo drop batteries, electrical and electronic waste off, please contac the local city/municipality ofice, household waste disposal service, or the refailer.

Care and Maintenance

Wie the productwith o sof lnt-fre dath.

DO NOT:
Use any abrasive cleaning solvents fo clean the product.
Expose the product fo extremely high or low femperatures.
Drop the product.
Attempt fo disassemble the product.
Dispose of the product in o fire as it will result in an explosion.

Instructions for Use Charging the Battery

The headphones are fitted vith a 3.7 V 160 mAh rechargeable Lithium-polymer battery (non-removable).
It is recommended that the battery is charged fully before first use; this will toke approx. 5-6 hours. Connect the micro USB end of the USB charging cable into the micro USB charging port on the headphones and the other end to a compatible USB port.
Whilst charging, the LED indicator light will illuminate red. Once the battery has charged fully, the LED indicator light will turn off.
Carefully disconnect both ends of the USB charging cable and store it safely for future use.
A play time of 9 hours is based on 20 % volume.

Using the Bluetooth® Headphones Basic Functionality

Turn on the headphones by pressing and holding ‘ ” for approx. 3 seconds. The headphones will emit a fone to signal that headphones are switched on.
Pause the track by pressing ; press it again fo resume the frack.
Adjust the volume of the headphones using ‘ ” ” Press and hold ‘ ” to increase the volume; decrease the volume by pressing and holding ‘1.
To switch to the next track, press
; play the previous track by pressing ‘ Press and hold w1 for approx. 3 seconds to furm headphones off. The headphones will emit a fone fo signal that headphones are switched off.

Modes

The headphones must be tuned on befre using any of the folloving modes.

Bluetooth Mode

STEP 1: Once the headphones are turned on, the LED indicaor lightwillflush blue and rd fo signal tht they are ready 1o b paired withu Bluetonth compotible device.

STEP 2 Searchfor the headphones using Blutooth compatible device. Select ‘EES095′ o connedt and pair. Once o connection has been made, the LED indicator light vill remain sofd blue 1o signal hat the devices are  paird.

STEP 3: To unpair or remove o Bluetooth compatible device from the headphones, turn off the Bluetooth function on the compofible device. The headphanes can now be paired with o new compatible device.

NOTE: Once connected, sound can be controlled using either the headphones or the relevant controls on the Bluetooth compatible device.

Making Phone Calls via a Bluetooth Compatible Device

Once the Bluefooth compatible device has been paired with the Bluetooth Headphones, phone calls can be made.

STEP 1: Using the Bluetooth compafible device, dial the number fo be called and select the Bluetooth/hands-free option. The built-in microphone on the headphones will now ad as o hands-free device.

STEP 2: To connect a call using the headphones, press “wil; 1o disconnect a call press and hold wir.

STEP 3: Reject an incoming call by pressing and holding i1 for approx. 2 seconds.

STEP 4: Redial the last number called by pressing I’ twice.

NOTE: The volume of the phone call can be controlled using either the headphanes or the Bluetooth compatible device.

Aux. Mode

Connect one end of the line-in Aux. cable fo the Aux. input port on the headphones and the her end to an MP3 player or other compafible audio source.
The headphones il automatically swich fo Aux. mode once the line-in Aux. cable has been inserted.
The LED indicator light wil remain unlit during Aux. mode. Once the line-in Aux. cable hos been removed, the headphones will automatically switch off.

NOTE: Once connected, sound can be controlled using the relevant controls on the compatible audio source.

Specifications

  • Product Code: EESO9SBLKSTKEU7V2

  • Bluetooth Version: 5.3

  • Wireless Distance: Up fo 25 m *

  • Driver Size: 40 mm

  • Impedance: 32 Q

  • Sensitivify: 110 dB +/-3

  • Frequency Response: 20 Hz-20 kHz

  • Chorging Voltage: 5 V === UsB

  • Battery: 160 mAh

  • Bluetooth Frequency: 2.4 GHz

  • Mox RF Output: < 10 dBm

  • Effective range may be reduced due to the presence of obstacles between connected devices.

Manufactured by
UP Global Sourcing UK Lid.,
Victoria Street, Manchester 0L9 0DD. UK.
Edmund-Rumpler StraBe 5, 51149 Ktln. Germany.
MADE IN CHINA.

©Intempo trademark. All rights reserved.
www.intempo.co.uk

Intempo logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals