intempo Active Noise Cancelling TWS Earphones Instruction Manual

: May 15, 2024
: intempo

www.intempo.co.uk

ACTIVE NOISE CANCELLING TWS EARPHONES

INSTRUCTION MANUAL

Description of Parts

MS Earphones

Function button (FUNCTION)
Built-in hands-free microphone
LED earphone indicator light

Charging Case

LED charging case indicator light
Earphone charging ports
Type-C port
Type-C charging cable

Please retain instructions for future reference.

Safety Instructions

When using electrical products, basic safety precautions should always be followed.
Keep the product and its accessories out of the reach of children.
Keep small parts away from children as these may present a choking hazard.
Children under 8 years should be supervised to ensure that they do not play with the product.
This product is not a toy.
This product contains no user serviceable parts. If the product and any of its accessories are malfunctioning or have been damaged, recycle the product.
Keep the product away from heat sources, direct sunlight, humidity, water and any other liquid.
Do not operate the product with wet hands.
Do not operate the product if it has been exposed to water, moisture or any other liquid, to prevent against electric shock, explosion and/or injury to yourself and damage to the product.
Do not leave any objects susceptible to magnetism (cash cards etc.) near the product.
Do not use the product for anything other than its intended use.
Do not use any accessories other than those supplied.
It is imperative to unplug the charging cable after the product has been used before it is cleaned.
This product is intended for domestic use only. It should not be used for commercial purposes.

To prevent possible hearing damage, do not listen at high volume levels for long periods of time — this may also damage the product.

Battery Safety

The supply terminals are not to be short-circuited.
In the event of a battery and cell leaking, do not allow the liquid to come in contact with the skin or eyes.
If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Secondary cells and batteries need to be charged before use. After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
Keep batteries out of the reach of children.
Do not crush, puncture, dismantle or otherwise damage batteries.
Do not store above 60 °C.
Avoid storage in direct sunlight.
Do not dispose of exhausted batteries in household waste.
Do not dispose of exhausted batteries in a fire as they may explode.
Once the batteries have been exhausted, dispose of the product at a local recycling station. Contact the local government offices for further details.
This product is fitted with a 3.7 V 30 mAh (earbuds) and 3] V 230 mAh (charging case) li-polymer rechargeable battery (non-removable).

Disposal of Waste Batteries and Electrical and Electronic Equipment

This symbol on the product, its batteries or its packaging means that this product and any batteries it contains must not be disposed of with household waste. Instead, it is the user’s responsibility to hand this over to an applicable collection point for the recycling of batteries and electrical and electronic equipment. This separate collection and recycling will help to conserve natural resources and prevent potential negative consequences for human health and the environment due to the possible presence of hazardous substances in batteries and electrical and electronic equipment, which could be caused by inappropriate disposal. Some retailers provide take-back services which allow the user to return exhausted equipment for appropriate disposal. It is the user’s responsibility to delete any data on electrical and electronic equipment prior to disposal. For more information about where to drop batteries, electrical and electronic waste off, please contact the local city/municipality office, household waste disposal service, or the retailer.

Declaration of Conformity

UP Global Sourcing UK Ltd. hereby declares that this unit is in compliance with the essential requirements and other provisions of directive 2014/53/EU.

The declaration of conformity may be consulted at UP Global Sourcing UK Ltd., Victoria Street, Manchester OL9 ODD. UK. Edmund-Rumpler Strafe 5, 51149 Koln Germany.
or online at http://www.intempo.co.uk/declaration-letters.html. Model No.: EE7036.

Care and Maintenance

Wipe the earphones with a soft, lint-free cloth.

DO NOT:
Use any abrasive cleaning solvents to clean the earphones.
Expose the earphones to extremely high or low temperatures.
Drop the earphones.
Attempt to disassemble the earphones.
Dispose of the earphones in a fire as it will result in an explosion.

Instructions for Use

Charging the Battery

The earphones are each fitted with a 30 mAh battery (non-removable). The charging case is fitted with a 230 mAh rechargeable battery (non-removable). It is recommended that the earphones and charging case are fully charged before first use; this will take approx. 3 hours.

To charge the charging case, connect the Type-C connector into the Type-C charging port and the other end to a compatible USB port.
To charge the earphones, place each earphone into the corresponding earphone charging port. Whilst charging, the LED earphone indicator light will illuminate. Once the battery has charged fully, the LED earphone indicator light will turn off.
‘Maximum play time of up to 5.5 hours is based on 20 % volume with ANC mode off. The charging case provides 2 full charges; this gives an overall play time of up to 10 hours before charging the case. Using ANC mode will drain the battery more quickly.

Using the Bluetooth Earphones

Basic Functionality

The earphones will automatically turn on when removed from the charging case Alternatively, press and hold ‘ FUNCTION ‘ on both earphones for approx. 3 seconds. The earphones will automatically pair with each other once switched on.
Pause a track by pressing ‘ FUNCTION ‘; press it once more to resume.
To skip to the next track, press ‘ FUNCTION ‘ twice on the right earphone. To play the previous track, press ‘ FUNCTION ‘ twice on the left earphone.
To increase the volume, press and hold ‘ FUNCTION ‘ on the right earphone for approx. 2 seconds.
To decrease the volume, press and hold ‘ FUNCTION ‘ on the left earphone for approx. 2 seconds.
To activate voice assistant, press ‘ FUNCTION ‘ three times on left earphone.
To activate transparent mode, press ‘ FUNCTION ‘ three times on right earphone. Press ‘ FUNCTION ‘ three more times to activate active noise cancellation.
Press and hold ‘ FUNCTION ‘ on both earphones for approx. 3 seconds to turn them off.

Modes

The earphones must be turned on before using any of the following modes.

Bluetooth Mode

STEP 1: Once the earphones are turned on, they will automatically pair and connect with each other. Once connected, the LED earphone indicator light will flash red and blue rapidly, signalling that the earphones are ready to be paired with a Bluetooth compatible device.
STEP 2: Search for the earphones using a Bluetooth compatible device. Select ‘EE7036’ to connect and pair to them. Once a connection has been made, the LED earphone indicator light will stop flashing and a tone will sound to signal that the earphones are now paired with the Bluetooth compatible device.
STEP 3: To unpair or remove a Bluetooth compatible device from the earphones, turn off the Bluetooth function on the compatible device. The earphones can now be paired with a new compatible device.
NOTE: Once connected, sound can be controlled using either the earphones or the relevant controls on the Bluetooth compatible device.

Making Phone Calls via a Bluetooth Compatible Device

Once a Bluetooth compatible device has been paired with the earphones, phone calls can be made.
STEP 1: Using the Bluetooth compatible device, dial the number to be called and select the Bluetooth/ hands-free option. The built-in microphone on the earphones will now act as a hands-free device.
STEP 2: To connect or disconnect a call using the earphones, press ‘ FUNCTION ‘ on either earphone.
STEP 3: To reject an incoming call, press and hold ‘ FUNCTION ‘ on either earphone for approx. 2 seconds.
NOTE: The volume of the phone call can be controlled using the Bluetooth compatible device.

Specifications

Product code: EE7036
Bluetooth version: 5.3
Wireless distance: Up to 25 m
Impedance: 32 Ω
Sensitivity: 100 ± 3 dB
Frequency response: 20 Hz-20 kHz
Charging voltage: 5 V ⎓1 A
Battery: 3.7 V 230 mAh (charging case) + 2′ 3.7 V 30 mAh (earphones)
Bluetooth frequency: 2.402 — 2.48 GHz
Max RF output: < 6 dBm
Active noise cancellation: up to 25 dB

‘Effective range may be reduced due to the presence of obstacles between connected devices.

The Bluetooth® word, mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks are under license. Other trademarks and trade names are those of their respective owners.

FSC
www.fsc.org
MIX
Paper from responsible sources
FSC® C177844

Manufactured by
UP Global Sourcing UK Ltd.,
Victoria Street, Manchester OL9 ODD. UK.

Made in China.
©Intempo trademark. All rights reserved.

www.intempo.co.uk

CD150323/M000000/V1