Intempo EE7323BLKPRIFOBUK Powerbank Instruction Manual
- May 15, 2024
- intempo
Table of Contents
EE7323BLKPRIFOBUK Powerbank
Instruction Manual POWER BANK
10000 mAh
DESCRIPTION OF PARTS
- 10000 mAh Powerbank
- ONIOFF button (ON/OFF)
- Micro USB input port
- Type-C Input/Output port
- USB output port 1
- USB outpu1 port 2
- Power indicator lights
- Type-C to USB Charging Cable
Please retain instructions for future reference.
SAFETY INSTRUCTIONS
When using electrical products, basic safety precautions should always be
followed.
Keep the product and USB cable out of the reach of children.
Children should be supervised to ensure that they do not play with the
product.
Children aged from 8 years and people with reduced capabilities can use this
product only if they have been given supervision and instruction on safe use
of the product and understand the hazards involved.
This product is not a toy.
This product contains no user serviceable parts. If the product and any of its
accessories are malfunctioning or damaged; recycle the product.
Keep the product away from other heat sources, direct sunlight, humidity,
water and any other liquid.
Keep the USB cable away from any parts of the product that may become hot
during use.
Do not operate the product with wet hands.
Do not operate the product if it has been exposed to water, moisture or any
other liquid, to prevent against electric shock, explosion and/or injury to
yourself and damage to the product.
Do not use the product for anything other than its intended use.
Do not use any accessories other than those supplied.
Do not cover the product when in use.
It is imperative to unplug the USB cable after the product has been used.
This product is intended for domestic use only. It should not be used for
commercial purposes.
BATTERY SAFETY
The supply terminals are not to be short-circuited.
In the event of a battery and cell leaking, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash the affected
area with copious amounts of water and seek medical advice.
Secondary cells and batteries need to be charged before use. After extended
periods of storage, it may be necessary to charge and discharge the cells or
batteries several times to obtain maximum performance.
Keep batteries out of the reach of children.
Do not crush, puncture, dismantle or otherwise damage batteries.
Do not store above 60 C.
Avoid storage in direct sunlight.
Do not dispose of exhausted batteries in household waste.
Do not dispose of exhausted batteries in a fire as they may explode.
Once the batteries have been exhausted, dispose of the product at local
recycling station. Contact the local government offices for further details.
This product is fitted with a3.7 V 10000mAh Lithium Polymer rechargeable
battery (non-removable).
Electric and Electronic devices as well as batteries must not be disposed of
with household waste. For more information about where you can drop off your
waste product for recycling, please contact your local authority.
The used battery should not be thrown away with other waste. The battery must
be collected, recycled disposed of in an environmentally sound manner
according to local regulations.
CAUTION
Before each use, check all USB cables for damage. If there are any signs of
damage, discontinue use to prevent short-circuit faults and damage, only use
the supplied USB charging cable to charge the product. Do not use the supplied
USB cable to charge other devices; this should only be used to charge the
product itself. Do not insert any USB cable into the output ports and input
ports at the same time for any reason.
CARE AND MAINTENANCE
Wipe the powerbank with a soft, lint-free cloth.
DO NOT:
Use any abrasive cleaning solvents to clean the powerbank.
Expose the powerbank to extremely high or low temperatures.
Drop the powerbank.
Attempt to disassemble the powerbank.
Dispose of the powerbank in a fire as it will result in an explosion.
INSTRU CTIONS FOR USE
CHARGING THE BATTERY
The powerbank is fitted with a 10000mAh rechargeable Li-polymer battery (non-
removable). It is recommended that the battery is fully charged before first
use; this will take approx. 6 hours.
The powerbank can be charged via Micro USB or Type-C input. Connect the Micro
USB connector on the USB charging cable (not included) into the Micro USB
input port on the powerbank and the other end to a compatible 5V USB port.
Alternatively, connect the Type-C connector on a Type-C charging cable
(included) into the Type-C input port on the powerbank and the other end to a
compatible 5 V USB port. Whilst charging, the power indicator lights will
flash to signal the level of charge. Once the battery has fully charged, all
four power indicator lights will illuminate.
Carefully disconnect both ends of the USB charging cable and store it safely
for future use.
WARNING: Do not insert the charging cable provided into the Type-C USB
input port and USB output ports on the product at the same time for any
reason.
USING THE POWERBANK TO CHARGE OTHER DEVICES
Check that charging cables are not bent, wrapped tightly, or warped when
stored. This can damage the internal cable and cause short-circuit faults when
used, which will damage the powerbank and any connected device. Inspect
charging cables before use; if there are any signs of damage, discontinue use
immediately and seek a suitable replacement.
USING THE USB OUTPUT CHARGING PORTS
The powerbank has the ability to recharge devices via USB output ports 1 and
2. To charge such devices, insert a USB connector into the required USB output
port on the powerbank and the other end into a compatible device.
NOTE: Both USB output ports can be used simultaneously to charge two devices
however, the battery will drain faster.
USING THE TYPE-C OUTPUT CHARGING PORT
The powerbank has the ability to charge devices via Type-C output port. To
charge such devices, plug the Type-C connector into the Type-C output port on
the powerbank and the other end into a compatible device. Charging should be
indicated on the compatible device.
CAUTION: Do not insert the charging cable into the Type-C input/output
port and the Micro USB input port at the same time for any reason.
ON/OFF SWITCH
Press and hold ‘ON/OFF’ to switch on the powerbank and monitor the remaining
power capacity of the powerbank. Press ‘ON/OFF’ twice to switch off the
powerbank.
LED Indicator | Remaining Power |
---|---|
…. | 100% |
… | 75% |
.. | 50% |
. | 25% |
0% |
TROUBLESHOOTING
The LEO indicator lights do not illuminate after switching on the
powerbank.
The battery power is exhausted. Recharge the powerbank and then check the
power indicator lights.
The powerbank cannot be charged.
The USB charging cable is not connected properly. Connect the USB charging
cable properly.
The powerbank charging time is short.
The remaining battery power is high and hasn’t exhausted; continue to use as
normal.
The powerbank has reached the end of its service life or is
malfunctioning.
If the power supply time does not last and is extremely short, even when the
powerbank is fully charged, then the powerbank has reached the end of its
service life. Purchase a new powerbank (service life varies depending upon
frequency of use).
The powerbank cannot supply power to a device.
The charging cable between the powerbank and the device is not connected
properly; reconnect the charging cable. The remaining battery power is low;
recharge the powerbank.
The supply time to the device is short.
The connector or charging port on the device is dirty; clean ii.
The powerbank has reached the end of its service life or is malfunctioning;
purchase a new powerbank (service life varies depending upon frequency of
use).
The powerbank is out of power or the remaining battery capacity is low;
recharge the powerbank.
The powerbank will not charge the device.
The powerbank is designed to charge devices up to 2.4 A. If the output is
exceeded, then the powerbank will either rut off or the charging time will be
increased greatly. Always check the input port of the device to be charged.
Check the charging cable for damage. If ii shows any signs of damage, seek a
suitable replacement.
Charging time is longer than usual.
The powerbank has reached the end of its service life or is malfunctioning;
purchase a new powerbank (service life varies depending upon frequency of
use).
The temperature of the surrounding environment is having an effect on the
operation of the powerbank, move the powerbank into a more suitable climate.
The USB charging cable cannot be properly connected.
Check the USB charging cable and make sure that only the USB charging cable
supplied is used when charging the powerbank. Some dust, dirt etc., may be in
the port; clean the USB port.
WARNING: Do not short-circuit the powerbank. To avoid short-circuiting,
keep the powerbank away from all metal objects (e.g., coins, hairpins, keys,
etc.).
The powerbank may become hot when charging. This is normal.
SPECIFICATIONS
Product code: EE7323
Capacity: 10000 mAh, 37 Wh
Working voltage: 3.7V
Micro USB input: 5 V 2.1A
Type-C input: 5 V 2.1A
USB output 1 & 2: 5 V 2.4 A (Max)
Type-C output 5 V 2.4 A (Max)
Total Output: 12 W (Max)
Operating Ambient Temperature Range: 0-45 C
Dimensions: Approx. 14.8 cm x 6.8 cm x 1.7 cm
Weight Approx. 239 g
www.fsc.org
Primark limited, PO Box 644, Arthur Ryan House,
22-24 Parnell Street, Dublin 1, Ireland.
Distributed by: Primark Limited, 41 West Street,
Reading, RG1 1TZ UK.
RN CODE: 1454 78
SEASON CODE: AW23
CD191022/M00000000/V1
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>