YITAHOME BFTLPT-3004 Portable Sink Camping Hand Washing Station User Guide
- May 15, 2024
- YITAHOME
Table of Contents
BFTLPT-3005
Portable Handwash Stand Group User Manual
BFTLPT-3004 Portable Sink Camping Hand Washing Station
- Please always assemble according to the instruction.
- Base tank can be fixed on ground through four peg holes at the corner if necessary.
- Ensure that the air release cap is clean to prevent contamination blocking the air.
Parameter:
1. Base tank capacity: 17L
2. Foot pump ability: 220ml
3. Hand soap tank capacity: 3L
4. Hand soap dispenser ability: 1ml
5. Product size after assembly: L50W33H 103cm
6. Flexible drain hose length: 31-80cm
-
Screw the stand column clockwise into the base tank.
-
Put the washbasin on the top of column and press it by hand or hit with a hammer.
For the first installation, you can apply some lubricating oil to the top of the column for easy installation. -
Run the water pipe through the corresponding rings and hole according to the following pictures
-
Insert the faucet into the water pipe and push back it in the hole of washbasin.
-
Fill the liquid soap into the tank and assemble the dispenser
-
Screw the flexible drain hose on the washbasin.
-
Fill the base tank with water and you can use it.
Base tank can be fixed on ground through four holes at the corner by pegs if necessary. ( Pegs are sold separately, not included in normal packing. )
To promote water conservation and environmental protection, a flexible drain hose can be connected to the waste water tank to collect hand washing water.