YITAHOME TLCFLS-6003 Farmhouse Vintage Chandelier Adjustable Instruction Manual
- May 15, 2024
- YITAHOME
Table of Contents
ASSEMBLY INSTRUCTIONS
TLCFLS-6003
TLCFLS-6004 
CHANDELIER
Notice：
- Follow the installation instructions. Please confirm all accessories are present before installation.
- Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces which are correctly assembled.
- If you encounter any problems during installation, please contact our customer service.
Part list
Installation
Step 1：Remove the cylindrical screw ( F ) from canopy ( E ) . Then attach the
fixing metal plate ( B ) to the outlet box with the mounting screws ( D ) .
The one marked “GND” must face outwards.
Step 2：Cut the length of wire when needed. The remaining wire will be at least
6″ long measured from the top of the canopy ( E ).
Step 3：Pay attention to connecting the wires. Be sure to differentiate between positive and negative points. Positive to positive, negative to negative, and ground to ground.
Step 4：Screw the rod(J) onto the shade(L) tightly.
Step 5：Put the decoration tube(K) and cap(I) onto the rod, and tighten them by
loop(H) on the shade(L).
Step 6：Hang the chain(G) on the loop(H) and the loop(H1) on the canopy as the
diagram as below.
Step 7：Install bulbs. (Bulbs not included)
Note：It can be used as the ceiling lamp without the chain( G ).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>