YITAHOME FTKDRH-0005 Pull Out Trash Can Recycling Bin Instruction Manual
- May 15, 2024
- YITAHOME
Table of Contents
Pure & Easy
ASSEMBLY INSTRUCTIONS
ZSGH-V2
FTKDRH-0005
FTKDRH-0006
KITCHEN RUBBISH BIN
FTKDRH-0005 Pull Out Trash Can Recycling Bin
- **** Gather and organize all required parts prior to assembly.
- Assemble on a flat, clean and soft surface.
Align the arrow directionv of
the paper card with the edge of the cabinet, place the center line of the
paper card on the center line of the cabinet, and drill pre-installation holes
in the cabinet bottom using a 2.5 mm drilI bit.Align left and right A with the
holes in the figure,and fix the first step with six ST4x14mm tapp ing
screws.
(this product cabinet
door thickness requirements for more than 14mm is suitable for installation)
Install the door as shown in the picture, use a 2.5mm drill to drill 4 pre-
installed holes, and fix the cabinet door’s part I with 4 x ST4x14mm screws.
Please note that the 4 fixing holes are long, so screws should be secured in
the middle position, leaving space to facilitate slight door adjustment in the
next step.
Installation Completed
CONTACT US:
If you have any questions about the installation of YITAHOME products, just
contact us at +1 888-717-8084 from Mon-
Fri 8:00 AM-4:30 PM PST / Sat. 8:00 AM-12:00 PM PST or e-mail us at after-
sale.cs@hotmail.com
Alternative method to contact us (amazon.com orders
only)
- Log into your Amazon account
- Go to “Your Orders” and find the purchase
- Click on “Contact Seller”
Pure & Easy
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>