YITAHOME ZSGH-V2 Kitchen Rubbish Bin Instruction Manual
- May 15, 2024
- YITAHOME
Table of Contents
YITAHOME ZSGH-V2 Kitchen Rubbish Bin Instruction Manual
ASSEMBLY INSTRUCTIONS
| Item no. | Reference Image | Qty. |
|---|---|---|
| A | X1 | |
| B | X1 | |
| C | X1 | |
| D | X2 | |
| E | X2 | |
| F | X2 | |
| G | X2 | |
| --- | --- | --- |
| H | X2 | |
| Ｉ | X2 | |
| J | X1 | |
| a | M4*25 | X1e2x+tra |
| b | M5*30 | X1e4x+tra |
| c | M5*8 | X4+ 1extra |
| --- | --- | --- |
| d | M5 | X4+ 1extra |
| e | M6*12 | X4+ 1extra |
| f | M6 | X4+ 1extra |
| g | ST4*14 | X4+ 1extra |
Align the arrow direction of the paper card with the edge of the cabinet,
place the center line of the paper card on the center line of the cabinet, and
drill pre-installation holes in the cabinet bottom using a 2.5 mm drilI
bit.Align left and right A with the holes in the figure,and fix the first step
with six ST4x14mm tapp ing screws.
(this product cabinet door thickness requirements for more than 14mm is
suitable for installation) Install the door as shown in the picture, use a
2.5mm drill to drill 4 pre-installed holes, and fix the cabinet door’s part I
with 4 x ST4x14mm screws.
Please note that the 4 fixing holes are long, so screws should be secured in
the middle position, leaving space to facilitate slight door adjustment in the
next step.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>