CRYSTORAMA ADD-300-CH Four Light Semi Flush Mount Instruction Manual

CRYSTORAMA ADD-300-CH Four Light Semi Flush Mount

Product Information

Specifications

• Product Name : ADD-300-CH-AU_CEILING
• Manufacturer: Crystorama.com
• Fixture Type : Pendant
• Number of Glass Sets : 24 pieces
• Glass Size : 2 3/4 x 7 3/4 inches
• Installation Type : Dry Rated

Product Usage Instructions for Pendant Installation

Installation Steps

1. Decide the preferred hanging height and select the appropriate number of rods.
2. Feed the wires through the rods, screw collar ring, and canopy with a larger center hole. Assemble the rods together.
3. Attach one end of the rod assembly to the top of the frame and the other end to the swivel on the mounting strap.
4. Mount the strap onto the outlet box.
5. Raise the fixture to the ceiling and make wire connections. Slide the canopy along the rods and over the mounting strap. Secure with the screw collar ring.
6. Install the bulb into the socket.
7. Dress the glass as per the provided illustration.

Glass Set Details

• 24 pieces of various colored glass
• Size : 2 3/4 x 7 3/4 inches each

Product Usage Instructions for Ceiling Installation

Installation Steps

1. Screw the canopy kit with a smaller center hole onto the frame.
2. Attach the mounting strap to the outlet box.
3. Lift the fixture to the ceiling over the mounting strap. Once wire connections are made, secure the canopy with two ball nuts.
4. Insert the bulb into the socket.
5. Dress the glass following the provided illustration.

Glass Set Details

• 24 pieces of clear glass
• Size : 2 3/4 x 7 3/4 inches each

Product Components

• A. (1) Canopy – D 5 1/8 x H1 inches – XBN300CHCAN5.125IN
• B. (1) Collar ring
• C. (1) Swivel
• D. (1) 6-inch Rod – XBN300CHROD6IN
• E. (3) 12-inch Rods – XBN300CHROD12IN
• F. (1) Frame
• G. (24) Glass – D 2 3/4 x H 7 3/4 inches – XBN300CHCLGLA7.75IN

FAQ

• Q: Is this fixture suitable for outdoor use?
  • A : No, this fixture is dry-rated and intended for indoor use only.
• Q: Can I use different types of bulbs with this fixture?
  • A : It is recommended to use bulbs that are compatible with the socket provided with the fixture for safe operation.
• Q: Are additional glass sets available for purchase?
  • A : Additional glass sets may be available for purchase separately. Please check with the manufacturer or authorized retailers for more information.

Pendant

For Pendant

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.

You will need a 4-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max, USE LED BULBS FOR EXTENDED USE
This Fixture is Dry Rated

How to Install

1. Decide the preferred hanging height and choose the correct number of rods needed.
2. Feed the wires through the rods, screw collar ring, and canopy (with a bigger center hole). Screw the rods together. Screw one end of the rod assembly onto the top of the frame and the other end onto the swivel on the mounting strap.
3. Attach the mounting strap to the outlet box.
4. Raise the fixture up to the ceiling and do the wire connections. Slip the canopy up along the rods and over the mounting strap. Secure with the screw collar ring.
5. Install the bulb into the socket.
6. Dress the glass as illustrated.

Glass Sets

1. 24 pcs Various colored glass 2 3/4×7 3/4″

WARNING : This product can expose you to Lead,  which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Ceiling

For Ceiling

All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local clantrical cadac

You will need 4-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE

How to Install

1. Screw the canopy kit (with a smaller center hole) onto the frame.
2. Attach the mounting strap onto the outlet box.
3. Raise the fixture up to the ceiling and over the mounting strap. When the wire connection is made, secure the canopy with two ball nuts.
4. Install the bulb into the socket.
5. Dress the glass as illustrated.

Glass Sets

1. 24 pcs Clear glass 2 3/4×7 3/4″

WARNING : This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov

Part Number

• A. (1)-Canopy,D 5 1/8XH1″

• XBN300CHCAN5.125IN

• B. (1)-Collar ring

• C. (1)-Swivel

• D. (1) – 6″ Rod – XBN300CHROD6IN

• E. (3) – 12″ Rods – XBN300CHROD12IN

• F. (1)-Frame

• G. (24)-Glass,D2 3/4xH7 3/4″

• XBN300CHCLGLA7.75IN

• Crystorama.com

References

• Crystorama Lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>