namron 89960 IR 24 Keys Colour Temperature Controller Instructions
- May 15, 2024
- NAMRON
Table of Contents
namron 89960 IR 24 Keys Colour Temperature Controller
Product Information
Specifications
- Product Name: IR 24 Keys Colour Temperature Controller
- Manufacturer: Namron AS
- Address: Nedre Kalbakkvei 88, N-1081 Oslo, Norway
Product Usage Instructions
Power On/Off
To power on the controller, press the power button. To power off, press and
hold the power button until the device turns off.
Adjusting Colour Temperature
Use the arrow keys to adjust the color temperature to your desired level.
The controller typically offers a range of colors from warm to cool.
Brightness Control
You can adjust the brightness of the lights connected to the controller
using the designated brightness control buttons.
Mode Selection
Explore different lighting modes by selecting the mode button and cycling
through the available options. Choose the mode that best suits your
preference.
Frequently Asked Questions (FAQ)
-
Q: How do I reset the controller?
A: To reset the controller, locate the reset button usually found on the back or side of the device. Use a pin or paperclip to press and hold the reset button for a few seconds until the controller resets. -
Q: Can I use this controller with all types of LED lights?
A: The compatibility of the controller with LED lights may vary. It is recommended to check the product specifications or consult with the manufacturer to ensure compatibility with your specific LED lights.
Product Description
- This IR (Infra-Red) Controller and Remote is designed for controlling LED flexible strips and provides an easy-to-use solution for choosing a colour temperature.
- The unit is easy to install and comes in two parts: a receiver, which installs between the strip light and driver/transformer, and a Remote Controller which can be used to set the color, brightness, and speed of the LED Strip.
- Using the IR Controller/Remote, you can wirelessly control the settings on your LED lights, choosing from one of 12 color temperatures.
- As this is an infrared controller, you will need a direct line of sight between the remote and the infrared sensor. If this will cause a problem you may want to consider one of Herald’s range of RF Wireless Controllers. The sensor is attached to a length of wire for optimum placement.
Direction for use
- Connect the load cord first, and then connect the power cord; Before powering on please ensure no short circuit between the cables;
- Used the 24-key infrared remote control, the key functions are as follows:
Namron AS – Nedre Kalbakkvei 88, N-1081 Oslo- NORWAY