oricom FS300 Non Contact Infrared Thermometer User Manual

oricom FS300 Non Contact Infrared Thermometer

Specifications

• Product Name: FS300 Non-Contact Infrared Thermometer
• Model Number: FS300
• Medical Device Registration: Australian Register of Therapeutic Goods (ARTG No. 198437)

Description

The FS300 Non-Contact Infrared Thermometer is a medical device designed to measure the body temperature of a patient without physical contact. It utilizes infrared technology to provide accurate temperature readings. This user guide contains important instructions on how to use the device correctly and achieve accurate measurements.

Warnings and Cautions
Before using the FS300 Non-Contact Infrared Thermometer, please read the label and user guide carefully. Follow the directions provided in the user guide for safe and accurate usage. Keep this user guide for future reference. Retain your proof of purchase for warranty service. Register your product online at the Oricom website for additional support.

Product Usage Instructions

Normal Measurement Point
To measure the body temperature accurately, it is recommended to measure at more than 2 points on the forehead. Use the highest temperature rating as the most accurate reading. The measurement points can vary from forehead to temple.

Sweating Measurement Point
If sweating is present on the forehead, it is advised to change the measurement point to behind the earlobe.

Temperature Ranges
The normal body temperature can vary within a small range even in a healthy person. It is also affected by factors such as time, environment, and activity. Refer to the table below for the normal body temperature ranges:

The normal temperature range can also vary by age:

Warning
Thank you for purchasing the Oricom FS300 Non-contact Infrared Thermometer.
The FS300 Non-contact Thermometer has been developed using the latest in infrared technology. This technology allows the user to measure the temperature without physical contact. To use this device correctly please follow the directions in this user guide. The instructions provide important details on how to achieve accurate measurements.

Please read this user guide carefully before initial use.

• Use this product only for its intended purpose as described in this manual and follow all instructions.
• The measurement of temperature using this product does not represent a doctor’s medical examination.
• Consult with your medical professional if any abnormality is found.
• Do not take a temperature measurement over a scar or open tissue.
• Do not expose the product to temperatures below 20oc (68oF) or above 50oc (122oF) or above humidity of 95% (≥95%Rh)
• do not drop the thermometer as it may cause damage
• do not take the temperature with this product near heat sources such as in direct sunlight, near a fireplace, or stove.
• do not use this product if it is not working properly, contact Oricom support.
• There are no user serviceable parts the only service required is battery replacement and general cleaning please follow the instructions in this user guide.
• if the product is not going to be used for an extended time please remove the batteries and store the thermometer in a cool dry place.
• This product is not waterproof. direct contact with water or other liquids should be avoided.
• do not leave the thermometer with infants or children at any time.
• The protective glass over the lens is fragile and handled with care. do not touch the glass of the infrared lens with bare fingers.
• do not modify or repair the thermometer.

Many people may not have an elevated temperature even if they are ill. in the following cases please consult your medical professional before using this product.

• under 90-day-old infants
• People on steroids, antibiotics, or antipyretics.
• People with compromised immune systems.

Cautions

• The reliability of the measurement cannot be guaranteed if the temperature is measured from parts of the body that are not recommended (anywhere other than the forehead or behind the earlobe).
• Similar to other thermometers, measurement error may occur within a range of ± 0.2oc ( ± 0.4oF)
• Measurement should not be taken until completely relaxed at normal room temperature.
• Please note that measurements may be incorrect after exercising, bathing, or getting wet in the rain.
• The temperature between the right and left forehead could be different.
• Measurement may be incorrect when the low battery ( ) the battery and re-measure.
• When measuring the temperature of a liquid (milk, water) place the probe as close as possible to the liquid but ensure that it is not immersed into the liquid as this may damage your thermometer.
• check your product regularly for damaged and exhausted batteries.

NOTE: ASTM laboratory accuracy requirements in the display range of 22 to 40°C(71.6°F to 104.0°F) for IR thermometers is ±0.3°C(±0.5°F), whereas for mercury in-glass and electronic thermometers, the requirement per ASTM
Standards E 667-86 and E 1112-86 is ±0.1°C(±0.2°F)

Simple Operation Principle
The body temperature is reflected on the temporal artery.

• The temporal artery is the artery located closest to the skin and is spread on the forehead. if the blood with body temperature reflection passes the temporal artery on the forehead, a corresponding amount of infrared rays will be generated. From the infrared rays, the body temperature can be measured.

• This product is a contactless-type thermometer and does not make direct contact with the forehead.
  The temperature measurement can be taken 2 to 3cm away from the body or object.

• This will decrease discomfort or possible infections caused by touch.

How to Take a Temperature

NOTE: Temperature readings may vary according to the location of measurement from forehead to temple. Therefore we recommend measuring the temperature at more than 2 points on the forehead. use the highest temperature rating as the most accurate reading.

NOTE: if sweating on the forehead is present we recommend changing the measurement point to behind the earlobe.

Temperature Ranges
body temperature means the internal temperature of the body. Normal temperature even in a healthy person can vary within a small range. The temperature of a person measured in the evening is normally 0.5oc higher than early morning and is also affected by the environment, time, and activity. Refer to the table below to find out the normal body temperature ranges.

• Normal body temperature can vary between individuals it is recommended that you record your body temperature when you are healthy as a reference point.

• Using your thermometer

  • Measuring body Temperature
    Switch to body temperature measuring mode, and check the body temperature on the temple area at a distance of 2 to 3cm.

  • Measuring bathing Water Temperature
    Switch to daily wide temperature measuring mode, and check the water temperature by aiming the thermometer at a distance of 2 to 3cm from the water. be careful not to get water on the Thermometer.

  • Measuring the Nursing bottle
    Switch to daily wide temperature measuring mode, and check the temperature by aiming the thermometer at a distance of 2 to 3cm from the baby’s bottle.

Product description

1. LCD
2. Probe
3. Start button
4. MODE button
5. MEM button
6. Sound button
7. Battery cover

Before first use

• before first use, insert the batteries supplied (2 x AAA Alkaline batteries).

Switching on and setting the thermometer

• Press the Start button START briefly.
  • The device switches on. After two seconds, the display shows that the device is ready for use.
  • The device always starts in body temperature mode .

Setting the measurement unit

• Press the Mode button and MeM button simultaneously for at least 3 to 4 seconds.
  • The device switches to the other measurement unit.
  • Possible measurement units: celsius °c and Fahrenheit °F

Setting the measurement sound

• Press the Sound button briefly.
  Each time the button is pressed, the sound switches on or off.

• if the display shows after pressing the button, the device emits a sound.

• if the display shows after pressing the button, the device will not emit sound.

• This setting is not stored. The next time the device is switched on, the sound is reset to.

Measuring body temperature

• Press the Start button briefly.
  • The device switches on. After two seconds, the display shows that the device is ready for use.
  • The device always starts in body temperature mode .
  • hold the thermometer 2 to 3cm from the measuring point.
  • The ideal measuring point is the temple area.
  • Press the Start button briefly.
  • Keep the distance until you hear the measurement completion beep.
  • if the thermometer is in silent mode, keep the distance for approximately 2 seconds.
  • NOTE: we recommend you change the measurement point to behind the earlobe when sweat is present.
  • Temperature readings may vary according to location. Therefore we recommend measuring the temperature at more than 2 points on the forehead.
  • Then please recognize the highest temperature as the right temperature. check the temperature on the LCD screen. This will be automatically stored.
  • Read the temperature on the display.
    • The measurement is automatically stored .

Displaying stored measurements

• Press the Start button briefly.
  • The device switches on. After two seconds, the display shows that the device is ready for use.
• The device automatically stores the last 32 measurements.
• Press the MeM button briefly.
  • The most recent measurement is displayed.
• Each additional press of the MeM button calls up the next most recent measurement. The number on the display indicates how many measurements ago this reading was taken.
  • The thermometer then changes to body temperature mode after 30 seconds.
• The device only stores measurements when in body temperature mode.

Measuring object temperature

• Press the Start button briefly.
  • The device switches on. After two seconds, the display shows that the device is ready for use.
  • The device always starts in body temperature mode.
• Press the Mode button briefly.
  • The device switches to the object temperature measuring mode .
• check the measurement-ready status on the LCD.
• hold the thermometer 2 to 3cm from the desired measuring point. Press the Start button briefly.
  • Keep the distance until you hear the measurement completion beep.
  • if the thermometer is in silent mode, keep the distance for approximately 2 seconds.
• Read the temperature from the display.
  • Measurements in object temperature mode are not stored .
• Subject surface temperature and inner temperature can be different.

Battery Replacement

• The device requires two AAA Alkaline batteries.
  • open the battery compartment.
  • For this purpose, slide down the battery compartment lid on the back.
• Take the used batteries out of the battery compartment.
• insert new batteries.
  • observe the correct polarity.
• close the battery compartment.
  • used batteries should not be disposed of in normal household waste.
  • dispose of batteries by local recycling regulations.

Cautions: if you do find the batteries have leaked fluid please do not touch the batteries or fluid. dispose of the batteries properly do not wrap them in metal or aluminum foil, wrap them in newspaper and dispose of them carefully. batteries may explode if burnt or exposed to excessive heat.

Error messages

NOTE: if the room temperature is between 15°c to 20°c(59°F to 68°F), the forehead temperature can become lower due to the room temperature.

Cleaning and Storage

• The sensor is a very sensitive part and easily damaged. For accurate measurement please keep the sensor clean.
• To clean the sensor please keep it facing down and carefully clean it with an alcohol-moistened cotton bud, allow to dry for at least one hour before using.
• To clean the outside use a cloth moistened with alcohol or water.
• do not use excessive force on the sensor.
• do not immerse the product in water or any other liquid.
• Keep the product away from direct sunlight, dust, and any other type of contaminating substance.
• Keep the product at normal room temperature. The operating ambient temperature range for this thermometer is 10 (50oF) to 40oc (104oF)
• Please place the product at normal room temperature for 30 minutes before use if it has been stored outside normal room temperature.

Product Specifications

FS300

basic functions

| Switches for Multi-measurements (body and object temperatures)

Switches for celsius/Fahrenheit, Memory function, Sound controls(on,off)

Ambient conditions| 15°c to 40°c(59°F to 104°F), humidity : below 90% Atmospheric Pressure(hPa) 700~1060
Transport and

Storage condition

| -20°c to 50°c(-4°F to 122°F), humidity : below 95%Rh Atmospheric Pressure(hPa) 700~1060
Measuring distance| 2 to 3cm from the measuring point (temple area)

Measuring range

| body temperature : 34°c to 42.5°c (93.2°F to 108.5°F)

Accuracy : ±0.2°c (36°c to 39°c) other Accuracy : ±0.3°c

object temperature: 15°c to 60°c (59°F to 140°F) Accuracy : ±2°c

Measuring time| less than 2seconds, continuous measurement
Resolution| 0.1°c
Mode selection| body temperature, object temperature
Memory function (for body temperature only)| Automatic memory function

confirm the result by using memory button can store up to 32 results space (1 to 32)

Sound| button sound, Measuring sound, Result sound, The sound can be turned on and off by using Sound button
Screen type| liquid crystal display(mono lcd)

display

| body temperature mode, object temperature mode, Memory location, low battery, °c/°F degree, hi / lo signs for the temperature outside the measurable ranges
---|---
button| Start, Sound, Mode, Memory
backlight| Turned on for 3 seconds after measurement The backlight turned off automatically
Power-saving| Turned off automatically after one minute
components| FS300 Manual, battery(AAA type) 2ea
Power| Alkaline ( AAA 1.5V battery 2 eA )
Measurable numbers| More than 5,000 times
Size| 62.4(w) x 41.8(d) x 103.1(h) mm
weight| 120g (without batteries)

FS300 is included as a medical device on the Australian Register of Therapeutic Goods (ARTG No. 198437). FS300 is intended for use as a measuring device for determining the patient’s body temperature. Always ReAd The lAbel ANd User Guide, uSe oNly AS diRecTed.

This product is manufactured in Korea under strict quality supervision by Public Co., ltd, b-301, Tae Kwang Industrial building, 191-1, Anyang 7-dong Manan-gu, Anyang-si Gyeonggi-do Korea.
Imported & diSTRibuTed iN Australia by the sponsor:- oricom International Pty ltd, unit 1, 4 Sovereign Place, South Windsor 2756 Australia

Customer Support

• if you have any problems setting up or using this product you will find useful tips and information in this user guide as well as “Frequently Asked Questions” on our website www.oricom.com.au.
• if you have further questions about using the product after reviewing the resources above or would like to purchase replacement parts or accessories please call our Customer Support Team. our dedicated local support team are more likely to be able to help you than the retailer where you made your purchase.

Important
Please retain your purchase receipt and attach to the back page of this user guide as you will need to produce this if warranty service is required. Take a few moments to register your product online: www.oricom.com.au

Express Warranty (Australia)

This express warranty is provided by Oricom International Pty Ltd AbN 46 086 116 369, unit 1, 4 Sovereign Place, South Windsor NSw 2756, hereinafter referred to as “Oricom”.
oricom products come with guarantees that cannot be excluded under Australian consumer law. you are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. you are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Oricom warrants that the product is free from defects in materials or workmanship during the express warranty Period.
This express warranty does not extend to any product from which the serial number has been removed or was purchased outside of Australia.

Nothing in this express warranty excludes, restricts, or modifies any condition, warranty, guarantee, implied term, right, or remedy under the Australian consumer law and which may not be so excluded, restricted or modified. For such conditions, terms, guarantees, and warranties that cannot be excluded, restricted, or modified, oricom limits the remedies available to the extent permitted in the relevant legislation.

The express warranty Period will be 1 year from the date of purchase of the product evidenced by your dated sales receipt. you are required to provide proof of purchase as a condition of receiving express warranty services. you are entitled to a replacement product or repair of the product at our discretion according to the terms and conditions of this document if your product is found to be faulty within the express warranty Period. This express warranty extends to the original purchaser only and is not transferable.

Products distributed by oricom are manufactured using new materials or new and used materials equivalent to new in performance and reliability. Spare parts may be new or equivalent to new. Spare parts are warranted to be free from defects in material or workmanship for thirty (30) days or for the remainder of the express warranty Period of the oricom branded product in which they are installed, whichever is longer. during the express warranty Period, oricom will where possible repair and if not replace the faulty product or part thereof. All parts removed under this express warranty become the property of oricom. in the unlikely event that your oricom product has a recurring failure, oricom may always, subject to the Competition and Consumer Act 2010, at its discretion, elect to provide you with a replacement product of its choosing that is at least equivalent to your product in performance.

No change to the conditions of this express warranty is valid unless it is made in writing and signed by an authorized representative of oricom.
oricom will not be liable under this express warranty, and to the extent permitted by law will not be liable for any defect, loss, damage or injury arising out of or in connection with a:

1. failure by you to adhere to the warnings and follow the instructions set out in this user guide for the proper installation and use of the product;
2. wilful misconduct or deliberate misuse by you of the product;
3. any external cause beyond our control, including but not limited to power failure, lightning, or over voltage; or
4. modification to the product or services carried out on the product by anyone other than oricom or Oricom’s authorized service provider.

How to claim your Express Warranty in Australia

oricom has a simple warranty process for you to follow:

• Please call or email our customer Support Team, at 1300889 785 or support@oricom.com.au.
• A customer Support Team member will verify after troubleshooting with you if your product qualifies under warranty. if so, they will give you a Product Return Authorisation number.
• we will then email or fax a Return Authorisation form and a Repair Notice (if necessary), together with instructions on how to return the goods for warranty service.

Please note that if a customer Support Team member advises that your product does not qualify for return, this warranty does not apply to your product. Products that are authorised to be returned to oricom in Australia must include all of the following:

• A completed Return Authorisation form
• A copy of your Proof of Purchase (please keep your original copy)
• The faulty product, including all accessories.

Send the approved returns to:

• oricom international Pty ltd
• locked bag 658
• South windsor NSw 2756 Australia

Please note that this express warranty excludes expenses incurred by you in returning any faulty product to us. you must arrange and pay any expenses incurred (including postage, delivery, freight, transportation or insurance of the product) to return the faulty product to us, however, we will arrange delivery of the repaired or replaced faulty product to you.

Important Information

Repair Notice
Please be aware that the repair of your goods may result in the loss of any user-generated data (such as stored telephone numbers, text messages, and contact information). Please ensure that you have made a copy of any data saved on your goods before sending for repair. Please also be aware that goods presented for repair may be replaced by refurbished goods or parts of the same type rather than being repaired.

Contact details for Oricom support and warranty claims in Australia Oricom International Pty ltd

• locked bag 658
• South Windsor, NSW 2756
• Australia
• email: support@oricom.com.au
• Phone: 1300 889 785 or (02) 4574 8888 (Monday to Friday 8 am to 6 pm AeST)
• web: www.oricom.com.au
• Fax: (02) 4574 8898

Contact details for Oricom support and warranty claims in New Zealand email: support@oricom.co.nz

• Phone: 0800 674 266 (Monday to Friday 10 am to 8 pm NZST)
• web: www.oricom.co.nz

FAQ

• Q: How do I register my product for warranty service?
  • A: To register your product for warranty service, visit the Oricom website and follow the registration instructions.
• Q: Where can I find the latest copy of the user manual?
  • A: The latest copy of the user manual can be found on the Oricom website at www.oricom.com.au.
• Q: How can I contact Oricom customer support?
  • A: You can contact Oricom customer support by calling 1300 889 785 or (02) 4574 8888.

Non-Contact Infrared Thermometer

• FS300 is included as a medical device on the Australian
• Register of Therapeutic Goods (ARTG No. 198437).
• FS300 is intended for use as a measuring device for determining the patient’s body temperature. AlwAyS ReAd The lAbel ANd uSeR Guide, uSe oNly AS diRecTed.
• Keep this user guide for future reference. Always retain your proof of purchase in case of warranty service and register your product on line at AuSTRAliA: www.oricom.com.au
• Please visit www.oricom.com.au for the latest copy of this user manual.oricom customer

Support: 1300 889 785 or (02) 4574 8888

https://manual-hub.com/

References

• Manual-Hub.com - Free PDF manuals!
• Oricom Baby Monitors UHF CB Radios & Cordless Phones
• Oricom New Zealand | Premium Baby Monitor Technology
• Oricom Baby Monitors UHF CB Radios & Cordless Phones
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>