OPTICIS CNDF-200 Component Video to 1-Fiber DVI Converter User Manual
- June 6, 2024
- opticis
Table of Contents
CNDF-200 Component Video to 1-Fiber DVI Converter
User Manual
Welcome!
Congratulations on your purchase of the Component video to 1-fiber DVI
converter, CNDF-200. This manual contains information that will assist you in
installing and operating the product.
Product Description
The CNDF-200, Component video to 1-fiber DVI converter receives Component
video up to 1080p (1920×1080), 60Hz signal and converts to optical signal and
transmits up to transmits 500 meters (1,640feet) over one (1) SC multi-mode
fibers. OPTICIS 1-fiber DVI receiver, DVFX-100-R is used as a pair to recover
1 fiber DVI to electrical DVI.
Shipping Group
- CNDF-200, Component video to 1-fiber DVI converter: One (1) unit
- AC/DC power adapter: One (1) unit of +5V, 3A (Locking type)
- User Manual
- Option Product: Mounting bracket
System Requirements for Setup
Hardware requirements
- You must have Component video sources such as a DVD player or camcorder.
- No special requirements for video sources
Installation
Important: Please keep the installation procedure below. Improper or no
operation may result if the start-up sequence is not correctly followed.
Step 1
Carefully unpack the contents of the shipping group.
Step 2
Plug and fasten the 5V power adapters to the +5V DC jack on the rear side of
the converter. Ensure the Power LED is ON (Blue).
Step 3
Connect the Component video source to CNDF-200 over 3 RCA cables.
Please make sure the firm connections between Y to Y IN, Pb to Pb IN, and Pr
to Pr IN. If the Component video source is active, the status LED (Blue) will
be turned on.
Step 4
Connect the OPTICAL OUT to a 1-fiber DVI receiver, DVFX-100-R over multimode
SC-SC optical fiber.
Step 5
Plug DVFX-100-R to the DVI input port of the display.
Step 6
If you need on-site monitoring, connect Y OUT, Pb OUT and Pr OUT on the front
side of the converter to the Component video input port of the local display
over 3 RCA cables.
Note1: The maximum extension length by multi-mode fiber is 500 meters.
Note2: It is recommended NOT to use any intermediate cable or adapter in
between to avoid undesirable performance degradation.
Troubleshooting
The display shows a black screen.
-
Ensure that all plugs and jacks used by external power supplies (both
Opticis and others) are firmly connected. Ensure that the power and status LEDs are ON. -
Ensure that the video ports are firmly plugged into the source and display.
-
Ensure that the converter and receiver modules are plugged correctly to the source and display, respectively.
-
Check if the source and display are powered on and properly booted.
The screen is distorted or displays noises.
- Check if the graphic resolution is properly set. Go to the display properties of Windows and tap the settings.
- Ensure that the resolution sets less than 1080p (1920×1080) at a 60Hz refresh ratio.
- Reset the system. Disconnect and reconnect the optical fiber or 5V power adapters.
Maintenance
No special maintenance is required for the converter and power adapters.
Ensure that the converter and power adapters are stored or used in a benign
environment free from liquid or dirt contamination. There are no user-
serviceable parts. Refer all service and repair issues to Opticis.
Technical Support and Service
For commercial or general product support, contact your reseller. For technical service, contact Opticis by email techsupp@opticis.com or visit its website at www.opticis.com
Product Specifications
CNDF-200, Component video to 1-fiber DVI converter
- Extension limit: 500 meters (1,640 feet) for 1080p (1920×1080),60Hz refresh rate.
- Graphic transmission bandwidth: Supports up to 1080p (1920×1080), 60Hz, or 1.485Gbps bandwidth per graphic channel.
- Supporting resolution: 480i, 576i, 480p, 576p, 720p, 1080i, 1080p
- Fiber-optic connection: CNDF-200 has one (1) SC receptacles soas to be connected with one (1) SC multi-mode fiber, having 62.5(50) / 125μm core.
- Dimensions (WDH): 104 x 112 x 28mm
- Environmental Specifications
- Operating temperature: 0°C to 50°C
- Storage temperature: – 30°C to 70°C
- Humidity: 10% to 85%
AC/DC Power Adapter
- Power Input: AC 100-240V, 50/60Hz 0.1A
- Power Output: +5 V, 3A SMPS DC-power Adapter
- Cord DC Jack: Core is 5 V and outer is GND.
Warranty Information
1 (One) Year Warranty
Opticis warrants this CNDF-200 to be free from defects in workmanship and
materials, under normal use and service, for a period of one (1) year from the
date of purchase from Opticis or its authorized resellers.
If a product does not work as warranted during the applicable warranty period,
Opticis shall, at its option and expense, repair the defective product or
part, deliver to the customer an equivalent product or part to replace the
defective item, or refund to the customer the purchase price paid for the
defective product.
All products that are replaced will become the property of Opticis.
Replacement products may be new or reconditioned.
Any replaced or repaired product or part has a ninety (90) day warranty or the
remainder of the initial warranty period, whichever is longer.
Opticis shall not be responsible for any software, firmware, information, or
memory data of customer contained in, stored on, or integrated with any
product s returned to Opticis for repair under warranty or not.
Warranty Limitation and Exclusion
Opticis shall have no further obligation under the foregoing limited warranty
if the product has been damaged due to abuse, misuse, neglect, accident,
unusual physical or electrical stress, unauthorized modifications, tampering,
alterations, or service other than by Opticis or its authorized agents, causes
other than from ordinary use or failure to properly use the product in the
application for which said product is intended.
Dispose of Old Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate
systems)
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste. Instead, it shall be handed over to
the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this
product.
The recycling of materials will help to conserve natural resources. For more
detailed information about recycling this product, please contact your local
city office, your household waste disposal service, or the shop where you
purchased the product.
© 2021 Opticis Co., Ltd. All Rights Reserved
Revision 1.3 Feb 2021
Opticis Locations
OPTICIS HQ
Opticis Co., Ltd.
3F, 305, Sanseong-daero
Sujeong-gu, Seongnam-si
Gyeonggi-do, 13354
South Korea
Tel: +82 (31) 719-8033
Fax: +82 (31) 719-8032
www.opticis.com
For order support, please contact your Distributor or Reseller.
For technical support, check with the Opticis website
www.opticis.com or contact
techsupp@opticis.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>