Shenzhen Chaojin Electronics CJ-719 Bluetooth Aroma Diffuser Instructions
- June 5, 2024
- Shenzhen Chaojin Electronics
Table of Contents
AROMA DIFFUSER
INSTRUCTIONS
INSTRUCTIONS FOR USE
Part One: To start mist and light
- Connect the power cord of the adapter to the DC socket of the oil diffuser. (FIG 1)
- Remove Top Cover. (FIG 2)
- Add water and don’t exceed the MAX LINE. (FIG 3)
- Add 2-3 drops of essential oil or more oil according to your favorite. (FIG 4)
- Replace the Top Cover. (FIG 5)
- Press the power button. (FIG 6)
- Press 1st time: mist on, and 7 colors LED lights to change automatically.
- Press 2nd time: fix the current LED light color.
- Press 3rd time: Mist on, light off.
- Press 4th time: mist and light off. 7. Hold the power button for 3 seconds in any working mode, the device will turn off (including mist and light). 8. The unit will auto-shutoff when water is at a low water level.
Part Two: To play music
- When the power is on, the Bluetooth will be on.
- Put Bluetooth Controller and Oil Diffuser within 10 meters without obstacle.
- Search for available device and select “Oil Diffuser with Speaker”
- Play your favorite tunes and shift by the Bluetooth controller.
- Adjust the volume by the Bluetooth controller.
PARTS
FEATURES
Use ultrasonic vibrations to transform your essential oil and water into a healthy mist.
- Model: CJ-719
- Water Capacity: 200 mL
- Suggested Room Size: about 50 m2
- Continuous Operation: Up to 8-9 Hours
- 7 color changing lights
CARE & MAINTENANCE
- Only use the power source that is supplied with the unit.
- Always cut off the power source before cleaning.
- An essential oil should not get in contact with the surface of the unit.
- Do not drop water from the air outlet side.
- Do not use any hard or sharp object to press the vibration plate of the device.
- Please use a cotton swab dipped in white vinegar to gently clean the water tank.
- Do not use strong detergents to clean the device.
CAUTION: Please keep the device dry if you are not using it for some
time.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>