ROOMBANKER PS1915 PIR Sensor User Manual

: May 15, 2024
: Roombanker

Table of Contents

ROOMBANKER PS1915 PIR Sensor

ROOMBANKER-PS1915-PIR-Sensor-product

Specifications

Detection method : Passive infrared sensor
Motion detection distance : Up to 12 m
Features :
- Pet Immunity : 10 kg
- White Light Filter : 2000 lux
- Tamper Protection: Rear
- Remote setting and testing : Setting and testing from RB Link App
- Advanced features:
- Power up enrolling
- Find me feature
- Signal strength detection
- Low battery notification
Wireless signal range : Up to 3,100 m in an open space with a hub
Electrical Characteristics: Power Supply
General :
- Operation Temperature
- Operation Humidity : From 10% to 90%
- Storage Temperature
- Dimension(WxHxD)
- Weight : 111 g
Compatibility: Operates with all RoomBanker Home Security Hubs, RBF repeaters

Product Usage Instructions

Installation

Follow these steps to install the PIR Motion Sensor:

Choose a suitable mounting location within the specified detection range.
Use the provided 3M adhesive to mount the sensor securely in place.
Refer to the Quick Start Guide for detailed installation instructions.

Setting Up Remote Testing

To set up remote testing using the RB Link App:

Download and install the RB Link App on your mobile device.
Follow the app’s instructions to pair the sensor with your hub.
You can now remotely test the sensor’s functionality using the app.

Advanced Features

Utilize the advanced features of the PIR Sensor:

Power-up enrolling : Sensor automatically pairs with nearby hub upon power-up.
Find me : Enable this feature to easily locate the sensor by its flashing green light.
Signal strength detection: Monitor signal strength with different colored flashes.
Low battery notification: Receive alerts for low battery levels.

FAQ

Q: How do I replace the batteries in the PIR Motion Sensor?

A : To replace the batteries, follow these steps:

Remove the sensor from its mounting position.
Open the battery compartment and replace the batteries with new ones.
Ensure proper alignment and close the compartment securely.
amount the sensor in its original position.

The passive infrared sensor detects motion by detecting changes in infrared (IR) levels caused by the presence of humans within its range.

Detection Performance

Detection method
- Passive infrared sensor
Motion detection distance
- Up to 12 m
Detection angle
Horizontal : 110°
Recommended installation height : 1.8m to 2.4m

Features

Pet Immunity
- ≤ 10 kg
White Light Filter
- 2000 lux
Tamper Protection
- Rear
Remote setting and testing
- Setting and testing from RB Link App

Advanced features

Power up enrolling When a sensor is powered up, it will automatically start paring to the hub nearby
Find me When enabled, the sensor starts flashing green, which can help identify the sensor from numerous devices.
Signal strength detection When enabled, the sensor starts flashing green/orange/red showing the wireless signal strength between the hub at the current installation site.
Low battery notification

Indicator

Alarm : Flashing Red
Find me : Flashing Green
Signal strength: Flashing Green / Orange / Red Flashing Green: signal strength is
strong, and is recommended to install the device hereFlashing Orange: signal strength is medium and the device can be installed here
Flashing Red : signal strength is bad or no signal and the device can not be installed here

RBF wireless technology

Wireless signal range

* Up to 3,100 m in an open space with a hub

Two-way communication with a hub

Frequency bands
- RBSS-PS1-915 : 902 ~ 928 MHz Depends on the sales region.
Wireless signal modulation
- FSK / DS
Encrypted communication
- All the data transmitted are protected by AES-CCM encryption with a random key.
Frequency hopping (FHSS)
- To prevent radio interference and radio signal interception.

Time division multiple access (TDMA)

With the help of clock synchronization technology, the hub will slice time into different divisions for different RBF wireless devices. In this way, all devices will communicate with the hub in a sequence.

Electrical Characteristics

Power Supply
- CR123A × 1
- Up to 5 years (standby mode)

General

Operation Temperature
- From -10°С to +55°С (14°F to 131°F)
Operation Humidity
- From 10% to 90%
Storage Temperature
- From -20°C to 60°C (-4°F to 140°F)
Dimension(WxHxD)
- 114.7mm × 61.2mm × 43.8mm
Weight
- 111 g

Compatibility

Operates with all RoomBanker Home Security Hubs, and RBF repeaters.

Complete set

Product /Quantity

PIR Sensor : × 1
Wall-mounting bracket : × 1
3M adhesive :× 1
Quick Start Guide :× 1

Additional information

Available models

RBSS-PS1-868
RBSS-PS1-915

Certifications

CE, CB
FCC
ICASA
RCM
NOM
Anatel

User Manual

Roombanker User Manual

Warranty

Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- (1) This device may not cause harmful interference.
- (2 ) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
To comply with RF exposure requirements, a minimum separation distance of 20 cm must be maintained between the user’s body and the device, including the antenna.