ROOMBANKER RBSS-MC1915 Door Magnetic Sensor User Manual
- June 17, 2024
- Roombanker
Table of Contents
ROOMBANKER RBSS-MC1915 Door Magnetic Sensor
The surface-mounted door magnetic sensor always monitor the opening and closing status of doors, and signals the Smart Hub.
Detection Performance
Detection method
- Reed switch
Detection Gap
-
17 mm
Features
Door Status detection
- Door Open
- The alarm will be triggered when the system is armed.
- Door Closed
Tamper Protection
- Rear
Remote setting and testing
- Setting and testing from RB Link App
Advanced features
- Power up enrolling
- When sensor is powered up, it will automatically start paring to the hub nearby
- Find me
- When enabled, the sensor starts flashing green, which can help identify the sensor from numerous door magnetic sensors.
- Signal strength detection
- When enabled, senor starts flashing green/orange/red showing the wireless signal strength between the hub at current installation site.
- Low battery notification
Indicators
- Alarm: Flashing Red
- Find me: Flashing Green
- Signal strength:
- Flashing Green: signal strength is strong, and is recommended to install device here
- Flashing Orange: signal strength is medium and device can be installed here
- Flashing Red: signal strength is bad or no signal, and device can not be installed here
RBF wireless technology
Wireless signal range
- Up to 1,900 m in an open space with hub
- Two-way communication with hub
Frequency bands
- 868MHz version: 863 ~ 870 MHz
- 915MHz version: 902 ~ 928 MHz
- Depends on sales region.
Wireless signal modulation
- FSK / DSSS
Encrypted communication
- All the data transmitted are protected by AES-CCM encryption with a random key.
Frequency hopping (FHSS)
- To prevent radio interference and radio signal interception.
Time division multiple access (TDMA)
- With the help of clock synchronization technology, hub will slice time into different division for different RBF wireless devices. In this way, all devices will communicate with hub in a sequence.
Electrical Characteristic
- Power Supply
- AA Battery × 1
- Up to 5.5 years (standby mode)
General
Operation Temperature
- From -10°С to +55°С (14°F to 131°F)
Operation Humidity
- From 10% to 90%
Storage Temperature
- From -20°C to 60°C (-4°F to 140°F)
Dimension(WxHxD)
- Body: 82mm x 42mm x 16mm
- Magnet: 82mm x 11mm x 18mm
Weight
- 55.6g
Compatibility
- Operates with all Roombanker Home Security Hubs, RBF repeaters.
Complete set
| Product | Quantity |
|---|---|
| Door Magnetic Sensor (Body & Magnet) | × 1 |
| Quick Start Guide | × 1 |
Additional information
Available models
- RBSS-MC1-868
- RBSS-MC1-915
Certifications
- CE, CB
- FCC
- ICASA
- LOA
- RCM
- NOM
- Anatel
Warranty
- Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different f rom that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>