Hangzhou Roombanker Technology DSGW-230 Smart Gateway User Manual
- June 5, 2024
- Hangzhou Roombanker Technology
Table of Contents
Hangzhou Roombanker Technology DSGW-230 Smart Gateway
Introduction
Purpose & Description
DSGW-230 is IoT gateway with multiple protocol and edge computing function. It provides reliable connectivity for a wide range of wireless IoT devices. The gateway’s modular architecture provides the ability to customize many gateway features providing an off-the-shelf solution that meets your exact needs. Options include Cellular, Bluetooth, Wi-Fi, Ethernet, ZigBee, Z-wave.
Product Feature Summary
- Support 12V power supply
- Support IEEE802.11ac, IEEE802.11a,IEEE802.11n,IEEE802.11g,IEEE 802.11b Protocol
- Support 4G LTE cat 1
- Support Bluetooth 5.2
- Support ZigBee3.0
- Support Z-WAVE
- Support LoRaWAN
- One WAN/LAN variable network port
Hardware block diagram
Mechanical Requirement
Drawings
Specifications
Technical Specification
| Category | Specifications |
|---|---|
| Power Supply | DC 12V/1.5A |
| Reset button | The reset button is hole button, After pressing the reset button |
for more than 5
seconds, the Locator will be restored to the factory settings.
Switch| On/Off power
Network Interface| The network interface supports CAT-5/CAT-5E to transmit
data and POE Power
Supply. It is WAN/LAN variable.
SIM card| Dual SIM card，link backup
SD card| Up to 128GB SD card
Indicator LEDs(RGB)| 1).Power LED 2). Wireless LED 3）LTE indicator
Wireless protocol| Zigbee, Z-WAVE, BLE, Wi-Fi
Antenna| Zigbee PCB Antenna；Wi-Fi/LTE/Lora FPC Antenna；Zwave Ceramic Antenna；
BLE Metal Antenna
Installation method| Flat,Ceiling,DIN
RTC| Real Time Clock operated from on board battery
Operating Temperature| -10℃~40℃
Storage Temperature| -40℃~85℃
Operating humidity| 10%~90%|
---|---|---
Cooling| Heat dissipation silicone/aluminum
Current| 500mA@5V
Performance Requirement
| CPU | • Quad-core Cortex A53 |
|---|---|
| RAM | • 2GB |
| eMMC | • 16GB |
| SD card | • Up to 128GB |
Wi-Fi Performance
| • IEEE wireless LAN standard:
IEEE802.11ac; IEEE 802.11a; IEEE802.11n; IEEE802.11g; IEEE 802.11b
• Data Rate:
IEEE 802.11b Standard Mode:1,2,5.5,11Mbps
IEEE 802.11g Standard Mode:6,9,12,18,24,36,48,54 Mbps IEEE 802.11n: MCS0~MCS7 @ HT20/ 2.4GHz band
MCS0~MCS7 @ HT40/ 2.4GHz band
MCS0~MCS9 @ HT40/ 5GHz band
IEEE 802.11ac: MCS0~MCS9 @ VHT80/ 5GHz band
• Sensitivity:
VHT80 MCS9 : -60dBm@10% PER(MCS9) /5GHz band HT40 MCS9 : -63dBm@10% PER(MCS9) /5GHz band HT40 MCS7 : -70dBm@10% PER(MCS7) /2.4GHz band HT20 MCS7 : -71dBm@10% PER(MCS7) /2.4GHz band
• Transmit Power:
IEEE 802.11ac: 13dBm @HT80 MCS9 /5GHz band IEEE 802.11ac: 16dBm @HT80 MCS0 /5GHz band IEEE 802.11n: 14dBm @HT20/40 MCS7 /5GHz band IEEE 802.11n: 16dBm @HT20/40 MCS0 /5GHz band IEEE 802.11n: 16dBm @HT20/40 MCS7 /2.4GHz band IEEE 802.11g: 16dBm @54MHz
IEEE 802.11b: 18dBm @11MHz
• Wireless Security: WPA/WPA2, WEP, TKIP, and AES
• Working mode : Bridge、Gateway、AP Client
• Range: 50 meters minimum, open field
• Transmit Power:17dBm
• Highest Transmission Rate: 300Mbps
• Frequency offset: +/- 50KHZ
• Frequency Range (MHz): 2412.0~2483.5
• Low Frequency (MHz):2400
| • High Frequency (MHz):2483.5
• E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW
• Bandwidth (MHz):20MHz/40MHz
• Modulation: BPSK/QPSK, FHSSCCK/DSSS, 64QAM/OFDM
---|---
Bluetooth-Performance
| • TX Power: 19.5dBm
• Range: 150 meters minimum, open filed
• Receiving Sensibility: [email protected]%BER
• Frequency offset: +/-20KHZ
• Frequency Range (MHz):2401.0~2483.5
• Low Frequency (MHz):2400
• High Frequency (MHz):2483.5
• E.i.r.p (Equivalent Isotopically Radiated power) (mW)<10mW
• Bandwidth (MHz):2MHz
• Modulation: GFSK
Zigbee Performance
| • TX Power: 17.5dBm
• Range: 100 meters minimum, open filed
• Receiving Sensibility:-94dBm
• Frequency offset: +/-20KHZ
• Frequency Range (MHz):2401.0~2483.5
• Low Frequency (MHz):2400
• High Frequency (MHz):2483.5
• E.i.r.p (Equivalent Isotopically Radiated power) (mW)<100mW
• Bandwidth (MHz):5MHz
• Modulation: OQPSK
Z-wave Performance
| • TX power up to13dBm (20mW)
• RX sensitivity: @100kbps-97.5dBm
• Range: 100 meters minimum, open filed
• Default Frequency: 916MHz( Different country with different
frequency)
LoraWAN
| • Frequency band support: RU864, IN865, EU868, US915, AU915, KR920, AS923
• TX power up to 27dBm, RX sensitivity down to -139dBm @SF12,
BW125kHz
LTE Cat 1| Operation Frequency Band: 850/900/1800/1900MHZ
• Global:LTE:FDD:B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28
• North America: LTE TDD:B2/B4/B12/B13
WAN/LAN| 10/100M bps
QA Requirements
Quality and Testing Information
| Information Description | Standard(Yes) custom(No) |
|---|---|
| ESD Testing | Yes |
| RF Antenna Analysis | Yes |
| Environmental Testing | Yes |
| Reliability Testing | Yes |
| Certification | FCC, CE, Bluetooth(BQB), PTCRB, RoHs |
Software
| System/Driver| Support|
---|---|---|---
System
| Linux| ●|
Debian| ●|
Andriod| ●|
Driver
| Uboot| ●|
UART| ●|
SPI| ●|
I2C| ●|
USB| ●|
eMMC| ●|
PCIe| ●|
Ethernet| ●|
SDIO| ●|
OTA| ●|
Protocol Stack
| Zigbee3.0| ●|
BLE5.1| ●|
Z-Wave| ●|
Wi-Fi| ●|
Application
| Wi-Fi sniffer| Demo source code|
zigbee3.0 APP| Demo source code|
beacon scanner| Demo source code|
MQTT client| Demo source code|
Z-Wave APP| Demo source code|
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To comply with RF exposure requirements, a minimum separation distance of 20 cm must be maintained between the user’s body and the device, including the antenna.
Hangzhou Roombanker Technology Co., Ltd. Tel:86-571-86769027/8 8810480
Website: www.dusuniot.com
www.dusunremotes.com
Floor 8, building A, Wantong center,
Hangzhou 310004, china
www.dusunlock.com
References
- Dusun IoT: Embedded Hardware Vendor | IoT Gateway Sepcialist
- Dusun IoT: Embedded Hardware Vendor | IoT Gateway Sepcialist
- Dusunremotes | Custom Intelligent Remote Control Manufacturer
- Dusunremotes | Custom Intelligent Remote Control Manufacturer