Hangzhou Roombanker Technology DSGW-210B IoT Edge Computer Gateway User Manual
- June 6, 2024
- Hangzhou Roombanker Technology
Table of Contents
Hangzhou Roombanker Technology DSGW-210B IoT Edge Computer Gateway
Introduction
Purpose & Description
DSGW‐210B is an IoT gateway with multiple protocols and edge computing
functions. It provides reliable connectivity for a wide range of wireless IoT
devices. The gateway’s modular architecture provides the ability to customize
many gateway features providing an off‐the‐shelf solution that meets your
exact needs. Options include LTE, Bluetooth, Wi‐Fi, Ethernet, USB, ZigBee,
Z‐wave, Lora, and Li battery backup.
1.2 Product Feature Summary
-
Support 5V USB type-c power supply
-
Support IEEE802.11n, IEEE802.11g, IEEE 802.11b Protocol
-
Support 4G LTE CAT M1, NB IoT
-
Support Bluetooth
-
Support ZigBee3.0
-
Support Z-WAVE
Support LoRa -
Support Thread and Matter protocol
-
One WAN/LAN variable network port
-
Support USB2.0
-
ackup Li-battery
-
Supporting LoRaWAN CLASS A/B/C standard
-
Compatible with mainstream network servers like The Things Industries, AWS, etc.
Hardware block diagram
Mechanical Requirement
Drawings
Interface and Dimension
Specifications
Technical Specification
| Category | Specifications |
|---|---|
| Power Supply | USB Type-C 5V/3A |
| Reset button | The reset button is a hole button, After pressing the reset |
button for more than 5 seconds, the Locator will be restored to the factory
settings.
Switch| On/Off power
Network Interface| WAN/LAN variable.
USB| USB2.0
SIM card| Micro SIM card
SD card slot| 1
Indicator LEDs(RGB)| 1).Power &battery LED 2). Wireless LED 3）LTE indicator
Wireless protocol| Zigbee, Z-WAVE, BLE ,Wi-Fi, LoRa
Antenna| Zigbee PCB Antenna, LTE/BLE/Z-WAVE/Wi-Fi FPC Antenna, LoRa Rubber
Duck Antenna
Li battery| 6000mAH
Installation method| Flat, Ceiling, DIN
RTC| Real-Time Clock operated from an onboard battery
Hardware encryption| ECC608
Operating Temperature| -10℃~60℃
Storage Temperature| -40℃~85℃
Operating humidity| 10%~90%
IP rating| IP22
Cooling| Heat dissipation silicone/aluminum
Current| 500mA@5V
Applications
How to use
-
Reset the device
Find the reset button on the gateway, then hold it for about 10 seconds. This will reset it back to factory settings. you can press the reset button up to three times, the device will enter into upgrade mode. you can restart the device by pressing the reset button once. After resetting, you need to reconfigure all the previous settings. -
Power On with back up Li battery
Long press the power switch button for 3 seconds to turn on the Li battery when the gateway is not power supply with power adapter. -
Insert SIM/TF card
Use the pin to press the hole next to the slot to pop out the card slot, install the SIM card and TF card according to the diagram below. -
Indicator Light Description
Red light| Start‐up is completed after the device is powered on
---|---
Blue light| Connecting to the network successfully
Green Light| 4G LTE dialing
Blue light turn circle| Connecting to the network -
Installation Method
You can install the brackets with Expansion screw into wall or roof, then insert the gateway.
A#801 Wantong center, Hangzhou , China
How to install Home Assistant
- Connect to the gateway
- Connect one end of the USB cable to the USB port on the laptop or desktop
- Connect the other end of USB cable to the USB port on the gateway
- Download firmware
- You can get the image of home assistant and tool from DUSUN.
- And open the RKDevTool, You can find the “ADB device”. Click the”switch”.
- Select the image of home assistant. Click the “firmware”button.
A#801 Wantong center, Hangzhou , China 
-
* Load the firmware
Operate Home Assistant
-
Access to LAN
Let the gateway connect to the LAN at home. And find the ip of gateway from your router. -
Visit dashboard of home assistant
You can visit the following URL in a web browser. http:// Gateway ip:8123 -
Wi‐Fi AP
You can find a Wi‐Fi AP with PC, the SSID: dusunha Password:12345678
Then you can visit the home assistant dashboard, follow the URL: http://192.168.10.1:8123
The Architecture between DSGW-210B and IoT
The following diagram describes the architecture of the integration it details the uplink and downlink data flows between the DSGW‐210B and IoT.
The integration between IoT Hub and DSGW-210B includes three features as the following:
- Handling uplink messages: The DSGW-210B publishes uplink messages to the IOT Hub of the users
- Creating and deleting devices: The users can manage the LoRaWAN devices in the IoT
- Updating state in device twin: The users can update the properties coming from the LoRaWAN devices. At the same time, the users can propose the downlinks according to the device desired properties
QA Requirements
Quality and Testing Information
| Information Description | Standard(Yes) custom(No) |
|---|---|
| ESD Testing | Yes |
| RF Antenna Analysis | Yes |
| Environmental Testing | Yes |
| Reliability Testing | Yes |
| Certification | FCC, CE, Bluetooth(BQB), PTCRB, RoHs |
FCC
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body
Note:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.