ROOMBANKER RBSS-WL1915 Water Leak Detector User Manual
- June 17, 2024
- Roombanker
Table of Contents
Water Leak Detector | Roombanker wiki
■ Environmental Monitoring
Sensor
■ Water Leak Detector ■ Specification
Water Leak Detector Download Spec
RBSS-WL1915 Water Leak Detector
The water leak detector with extension cable design for multi-point high- precision leak detection, is ideal for areas prone to leaks, including kitchens, bathrooms, and balconies.
Detection Performance
Detection method
- Main body
- Extension cable
Features
IP Rate
- IP66
Remote setting and testing
- Setting and testing from RB Link App
Advanced features
- Power up enrolling When sensor is powered up, it will automatically start paring to the hub nearby
- Find me When enabled, the sensor starts flashing green, which can help identify the sensor from numerous devices.
- Signal strength detection When enabled, senor starts flashing green/orange/red showing the wireless signal strength between the hub at current installation site.
- Low battery notification
Indicator
- Alarm: Flashing Red
- Find me: Flashing Green
- Signal strength: Flashing Green / Orange / Red Flashing Green: signal strength is strong, and is recommended to install device hereFlashing Orange: signal strength is medium and device can be installed hereFlashing Red: signal strength is bad or no signal, and device can not be installed here
RBF wireless technology
Wireless signal range
- 868 MHz Sensor: Up to 1,900 m in an open space with hub
- Two-way communication with hub
Frequency bands
- 868 MHz Water Leak Detector: 863 ~ 870 MHz
- 915 MHz Water Leak Detector: 902 ~ 928 MHz Depends on sales region.
Wireless signal modulation
- FSK
Encrypted communication
- All the data transmitted are protected by AES-CCM encryption with a random key.
Frequency hopping (FHSS)
- To prevent radio interference and radio signal interception.
Time division multiple access (TDMA)
- With the help of clock synchronization technology, hub will slice time into different division for different RBF wireless devices. In this way, all devices will communicate with hub in a sequence.
Electrical Characteristics
Power Supply
- CR2032 × 1
- Up to 2.2 year (standby mode)
General
Operation Temperature
- From -10°С to +55°С (14°F to 131°F)
Operation Humidity
- From 10% to 90%
Storage Temperature
- From -20°C to 60°C (-4°F to 140°F)
Dimension(WxHxD)
- 64.5mm x 64.5mm x 20mm
Weight
- Water Leak Detector: 45 g
- External Strobe: 8.3 g
Compatibility
- Operates with all RoomBanker Home Security Hubs, RBF repeaters.
Complete set
Product | Quantity |
---|---|
Water Leak Detector | × 1 |
External strobe | × 1 |
CR2032 battery | × 1 |
Screw package | × 1 |
3M adhesive | × 1 |
Quick Start Guide | × 1 |
Additional information
Available models
- RBSS-WL1-868
- RBSS-WL1-915
Certifications
- CE, CB
- FCC
- ICASA
- RCM
- NOM
- Anatel
Warranty
Replacement and repair within 24 months of the date of sale. Batteries are not
covered under warranty.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>