ROOMBANKER 2AUXB Indoor Siren Alarm User Manual
- May 15, 2024
- Roombanker
Table of Contents
ROOMBANKER 2AUXB Indoor Siren Alarm
Indoor Siren
The wireless alarm sirens with loud sounds and flashing lights are designed to
grab the attention of your community and scare off any vandals effectively.
- Siren Performance
- Type of notification
- Sound & Strobe
- Sound volume level
- Adjustable: 85 dB / 95 dB /105 dB
- Alarm duration
- Adjustable: 1s ~ 15mins (90s by default)
Features
- Volume test
Support
Tamper protection
Rear
- Remote setting and testing
- Setting and testing from RB Link App
Advanced features
- Power up enrolling When the siren is powered up, it will automatically start paring to the hub nearby
- Find me When enabled, the siren starts flashing green, which can help identify the siren from numerous devices.
- Signal strength detection When enabled, the siren starts flashing green/orange/red showing the wireless signal strength between the hub at the current installation site.
Low battery notification
Indicators
- Alarm: Flashing Red
- Find me: Flashing Green
- Signal strength: Flashing Green / Orange / Red Flashing Green: signal strength is strong, and is recommended to install the device here
- Flashing Orange: signal strength is medium and the device can be installed here
- Flashing Red: signal strength is bad or no signal and the device can not be installed here
RBF wireless technology
- Wireless signal range
- 915 MHz Siren: Up to 1,900 m in an open space with a hub
- Two-way communication with the hub
Frequency bands
- RBAD-SI1-915: 902 ~ 928 MHz
- Depends on the sales region.
Electrical Characteristics
- Power Supply
- 3.7V Lithium battery with external charger
- Up to 2 years (standby mode)
General
- Operation Temperature
- From -10°С to +55°С (14°F to 131°F)
- Operation Humidity
- From 10% to 90%
- Storage Temperature
- From -20°C to 60°C (-4°F to 140°F)
- Dimension(WxHxD) Φ80 × 34mm
- Weight 89 g
Compatibility
Operates with all RoomBanker Home Security Hubs, and RBF repeaters.
Complete set
- Additional information
- Available models
- RBAD-SI1-868
- RBAD-SI1-915
- Certifications
- CE, CB
- FCC
- ICASA
- LOA
- RCM
- NOM
- Anatel
Warranty
Replacement and repair within 24 months of the date of sale.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation This device has been tested and found to
comply with the limits for a Class B digital device, under Part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.