Wyze V1.0 Cam v3 Pro Security Cam Baby Monito User Guide
- August 22, 2024
- Wyze
Table of Contents
Wyze V1.0 Cam v3 Pro Security Cam Baby Monito
Product Information
Specifications:
- Model: Wyze Camera
- Release Date: February 11, 2022
- Version: 1.0
- Features: Full-length video recording, Smart AI detection, Back-to-back event recording, Exclusive discounts
Usage Instructions
Setup:
- Connect the camera to a power outlet and wait for 20 seconds or until the status light flashes red.
- Download the Wyze app and sign in or create an account.
- Press the SETUP button for 3 seconds or until there is a voice prompt.
- Follow the instructions in the Wyze app to finish setup.
Spotlight:
Turn the spotlight on and off manually from the live stream. Go to Camera
Settings > Spotlight Settings to adjust the brightness, set schedules, and
more.
Live Stream Tip: The spotlight has two brightness levels, Low for indoor
use and High for outdoor use.
Status Light Guide:
DURING INSTALLATION:
- Solid red light: Device powered on and initializing
- Flashing red light: Device ready to connect
- Flashing red & blue lights: Connection in progress
- Flashing blue light: Device connected and finishing setup
- Solid blue light: Device working properly
AFTER SETUP:
- Solid red light: Live stream being viewed or recording in progress
- Quickly flashing red light: Siren in use
- Solid blue light: Device working properly, no operations running
FAQ:
-
Q: Can I adjust the brightness of the spotlight?
A: Yes, you can adjust the brightness of the spotlight by going to Camera Settings > Spotlight Settings. -
Q: How do I know if the device is properly set up?
A: The status light will display a solid blue light when the device is working properly and no operations are running.
Read this manual carefully and save it for future reference.
Disclaimer:
The products, accessories, user interfaces, etc. illustrated in this guide are
intended for reference only. Due to product updates, the actual product and
the illustrations in this guide may vary.
GET BETTER SECURITY WITH CAM PLUS
- Record Full-Length Videos
- Get unlimited full-length video recordings.
- Smart AI Detection
- Detect people, packages, vehicles, and more.
- Back-to-Back Event Recording
- Capture everything without 5-minute gaps.
- Exclusive Discounts
- Get exclusive discounts on Wyze products.
Subscribe or learn more at services.wyze.com.
IN THE BOX
- Wyze Cam v3 Pro × 1
- USB Cable × 1
- Wall Plate × 1
- Power Adapter × 1
- Mounting Tape × 1
- Mounting Screw × 1
- Quick Start Guide × 1
DESCRIPTION
- Spotlight
- Microphone
- Status Light
- Lens
- Speaker
- Micro USB Port
- MicroSD Slot (Card not included)
- SETUP Button
- 1/4” Mount (Unscrew to access)
- Mounting Hole
SETUP
-
Connect the camera to a power outlet and wait for 20 seconds or until the status light flashes red.
-
Download the Wyze app and sign in or create an account.
-
Press the SETUP button for 3 seconds or until there is a voice prompt.
-
Follow the instructions in the Wyze app to finish setup.
SPOTLIGHT -
Turn the spotlight on and o manually from the live stream. Go to Camera Settings > Spotlight Settings to adjust the brightness, set schedules, and more.
Tip : The spotlight has two brightness levels, Low for indoor use and High for outdoor use.
STATUS LIGHT GUIDE DURING INSTALLATION
-
Solid red light
The device is powered on and initializing -
Flashing red light
The device is ready to connect -
Flashing red & blue lights
Connection is in progress -
Flashing blue light
The device is connected and finishing setup -
Solid blue light
The device is working properly
STATUS LIGHT GUIDE AFTER SETUP
-
Solid red light
Live stream is being viewed or a recording is in progress -
Quickly flashing red light
Siren is in use -
Soild blue light
The device is working properly and no operations are running
FCC
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
ISEDC RSS WARNING
This device complies with ISEDC license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
ISED RADIATION
EXPOSURE STATEMENT
This equipment complies with ISEDC RF radiation exposure limits set forth for
an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter. This equipment
should be installed and operated with a minimum distance of 20 cm between the
radiator and your body. Only use the power supply provided. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
WARRANTY INFORMATION
Your Wyze product is covered by a one-year limited warranty. You can view the
limited warranty terms at https://wyze.com/return-warranty-policy or request
a copy by contacting Wyze at +1
206-339-9646.
Apple logo and App Store are trademarks of Apple Inc., registered in the U.S.
and other countries and regions. Google Assistant, Google Home, Google Play,
and the Google Play logo are trademarks of Google LLC.
NEED HELP?
Contact our Support Team: https://wyze.com/support Join the Community:
https://wyze.com/community
Scan the QR code to learn more
Wyze and Wyze Cam v3 Pro are trademarks of Wyze Labs, Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>