Shenzhen Bainaohui Electronics BNH-TK5 2.4Ghz Wireless Mini Multimedia Keyboard User Manual
- June 5, 2024
- Shenzhen Bainaohui Electronics
Table of Contents
Shenzhen Bainaohui Electronics BNH-TK5 2.4Ghz Wireless Mini Multimedia
Keyboard User Manual
Features
10m 2.4G wireless using distance
Keyboard and mouse 2-in-1
Comfortable scissor key structure
Smooth optical-sensor trackball controller
Quiet scroll wheel
Smart power saving mode
Support multi language
Specifications
Working voltage:+3V
Static current:50uA
Key dynamic current:1.5mA
Trackball dynamic current:15mA
Keyboard size:26111230mm
Weight:210g
Keys:59 keys+15 Multi media keys+20 hot keys
Key elasticity:50±8g
Key pre travel:0.5±0.2mm
Key total travel:1.7±0.5mm
Operation distance:10m
Using battery:2pcs of AA battery
Key using lifetime: over 6 million times
Material: ABS
How to use
- When you get this 2.4g wireless air keyboard, please open the battery case on the keyboard backside.
- Please insert 2 pieces AA alkaline batteries.
- Please find the mini USB receiver on the right of keyboard back
- Please put the mini USB receiver into the USB port.
- Please switch the power on.
- After the keyboard is connected, u can use it freely.
Note:
This keyboard works for Android, Windows, Mac system.
This keyboard will be in sleeping mode without using in a few minutes. Please
press any key on the keyboard to wake it up.
Please take off the batteries if no use in a long time.
Multimedia function description
- Multi-media
- Volume+
- Volume-
- Silent
- Mouse pointer
- Low battery indicator
- My computer
- Play/stop
- Previous
- Next
- Stop
Tip : Fn + Keys printed by blue letters can make this function(blue letter) work.
Attention: When the low battery indicator is flashing, you need to refresh batteries.
Where is the Nano receiver?
FCC Statement
Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.