DONGGUAN P08 Tactical Pen Tungsten Steel Window Breaking User Manual

: July 26, 2024
: Dongguan

Table of Contents

DONGGUAN P08 Tactical Pen Tungsten Steel Window Breaking
Indicator Light States
Shutdown method
Charging
Bluetooth connection
product specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DONGGUAN P08 Tactical Pen Tungsten Steel Window Breaking

Indicator Light States

Green light shows its working
Red light shows its charging
Blinking red light shows its low battery

Starting up method:

Hold for 3 seconds to power on, and the indicator light will turn green.

Shutdown method

Hold for 3 seconds to turn off, and the indicator light will disappear.
Leave still for 5 minutes to auto turn\ off, and the indicator light will\ disappear. Off-state (all lights are off)

Charging

Charging on the magnetic iPad, the green light will start flashing and charging normally when the pen 1s fully charged. the light turns green and turns off after 5 minutes.

Note: Bluetooth shortcut key stylus power-on indicates green light working mode, Bluetooth and 1Pad connected status,

single click: return to the main page,
double click:display multitasking, triple click: screenshot the current page.

ipad magnetic absorption charging/storage

Bluetooth connection

Press and hold for 3 seconds to turn on the power indicator light and turn on the green light iPad settings enter the Bluetooth interface, turn on Bluetooth, to cop select lomeet!, then click pair.

Bluetooth shortcut key:

Note: Use the Bluetooth shortcut, power-on indicator green light working mode, Bluetooth and iPad connected status,

single click: return to the main page,
double click: display multitasking, triple
click: screenshot the current page.

How to display the power of the stylus on the iPad?

Long press the + sign on the upper corner of the iPad screen to add widgets, and select the widgets inside the battery. There are three modes that can be freely selected.

Solutions to common problems:

The stylus cannot connect to Bluetooth. Solution: The stylus can be turned on normally. The green light displays but can’ t connect to Bluetooth. Enter the Bluetooth page to connect to the Bluetooth device.
If there are more than 5 Bluetooth channels, ignore all the Bluetooth device. Restart the stylus and search for I-Pencil to reconnect. The reason is too many conflicting Bluetooth connections.

The nib is twisted and the rotating slide wire is loosened:

Solution: The nib slipper needs to be replaced with a new nib, and it can be used normally without rotating the slippery wire.

The stylus does not work:

Solution:

a. Hold for 3 seconds to turn on the red\ light, and immediately turn off the stylus to enter the power-free state, then it needs to be charged before it can work normally.
b. Hold the on button for 3 seconds to\ turn on the power indicator light entering the extreme sleep mode, you need to activate the charging bar to charge. Ihis state needs to be charged for 50 minutes before it can be used
c. How to activate the extreme sleep mode? Use the iPad to charge, the stylus should stick on the iPad, and the indicator red light displays for 3 seconds, then flashes on and off for 3 seconds. Repeat this action 3-6 times, and the pens lightturns red. If the
flashing does not stop, it means normal charging. In this state, it needs to be charged for 20 minutes before the pen can enter normal use.

The green light cannot be written: Solution:

a. Whether the original pen has been used, and whether the original pen has been used to enter the Bluetooth setting and ignore the Bluetooth of the original pen.
b. If the green light is on for a long time, the device cannot be powered off. Press and hold for 6 seconds to make the stylus enter the restart and recovery mode.
c. Use the complimentary nib to reinstall and then try writing.

Working contact of green light. Solution:

a. Check whether the stylus is tightened and whether the broken tip will also affect the broken touch.
b. Check whether the iPad screen is clean, oil or water may cause disconnection.
c. Check the thickness of the iPad screen protective film, if the protective film is too thick, it will disconnect.

product specification

Model: P08
Dimensions: 165×8. 9mm
Charging method: iPad adsorption wireless charging
Charging time: 40 minutes
Pen tip size: 1.7mm
Power saving mode: 5 minutes static automatic sleep-compatible device
iPad Pro 11-inch (1st&2rd&3rd&4th)
iPad Pro 12.9-inch (3rd&4th&5th&6th)
iPad Air (4th&5th)
iPad mini (6th)
Kindly reminder:

Only compatible with 2018/2019/2020/2021/ 2022/2023 Apple iPad Pro/iPad Air/iPad moes not support iPhone, Android, Microsoft devices and earlier iPad versions.

Warning:

This device complies with\ Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party respond sible for compliance could vote s authority to operate the equipment

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,\ if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determ ined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help note:

This device and its antenna (s) must not be co-located or operation in conjunction with any other antenna or transmitter The device has been evaluated to meet general RF exposure requirement. The devicecan be used in portable exposure condition without restriction.