CMA EST-FL1 EST Front Loader Water Dishwasher Instruction Manual
- May 15, 2024
- CMA
Table of Contents
CMA EST-FL1 EST Front Loader Water Dishwasher Instruction Manual
PRODUCT OVERVEIW
WARNING: Electrical and plumbing connections need to be made by a licensed service person and comply with all Federal, State and Local Health, Electrical, Plumbing and Safety codes.
-
Connect dish machine to hot water source recommended 140 temperature (120 minimum temperature required).
-
Connect a 2″ drain pipe (not supplied) from scrap accumulator to floor or wall drain.
-
Insert tube stiffener with chemical tubing into each corresponding chemical dispenser.
WARNING: Electrical and plumbing connections need to be made by a licensed service person and comply with all Federal, State and Local Health, Electrical, Plumbing and Safety codes.
-
Level dishmachine by adjusting leveling legs. Dishmachine must be level front and back to ensure proper performance.
-
Press the “FILL/START” switch. Hold in the “FILL” position until the water overflows into the scrap accumulator.
-
Open dishmachine doors completely. Closing the door will automatically activate the machine.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>