CMA DISHMACHINES EST-FL Upright Low Temperature Dishwashers Owner’s Manual

CMA DISHMACHINES EST-FL Upright Low Temperature Dishwashers

Product Information

The EST-FL model is a front-loading dishwashing machine manufactured by CMA Dishmachines. It comes with an initial parts kit (P/N 01100.84) and an optional Sani alarm (P/N 12508.00). The machine has an exploded view assembly of parts which includes a cabinet assembly, drainage system, pump assembly, control box, and spray arm assembly.

Product Parts Manual

Initial Parts Kit (P/N 01100.84)

Product Optional Sani Alarm (P/N 12508.00)

The optional Sani alarm (P/N 12508.00) includes conduit, connectors, control box light, wire, wire ties, sanitizer alarm box assembly, sanitizer low level vacuum switch, sanitizer alarm buzzer, sheet metal screw, wall anchors, and Y hose connector.

Product Exploded View Drawings

The exploded view drawings include a cabinet assembly, drainage system, pump assembly, control box, and spray arm assembly.

Product Usage Instructions

1. Ensure that the machine is properly assembled before using it.
2. Load the dishes into the machine according to the manufacturer’s instructions.
3. Add detergent and rinse aid to the machine as required.
4. Turn on the machine and select the appropriate wash cycle.
5. Once the cycle is complete, unload the dishes and inspect them for cleanliness.
6. If necessary, repeat the wash cycle or re-wash any dirty dishes.
7. Turn off the machine and clean it according to the manufacturer’s instructions.

Parts Manual

Initial Parts Kit (P/N 01100.84)

Optional Sani Alarm

Part Number 12508.00

Exploded View

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 3| 00400.00| Conduit, 3/8” Sealtite
2| 1| 00401.00| S.T. 3/8” Straight Connector
3| 1| 00402.00| S.T. 90 Degree 3/8” Connector
4| 1| 00406.00| Control Box Light, .5” Diameter, Red
5| 1| 00435.00| Squeeze Tube, 8”
6| 1| 00521.00| Wire, 18 Gauge, Orange, 6 ft.
7| 1| 00531.00| Wire, 18 Gauge, White, 6 ft.
8| 5| 00931.00| Wire Tie, Small
---|---|---|---
9| 1| 12510.00| Sanitizer Alarm Box Assembly
10| 1| 12511.50| Sanitizer Low Level Vacuum Switch
11| 1| 12512.00| Sanitizer Alarm Buzzer, 120 Volts
12| 4| 40126.10| #10 x 3/4″ Sheet metal Screw
13| 4| 40127.00| Wall Anchors
14| 1| 00426.00| Y Hose Connector, 3/16”

Exploded View Drawings

Cabinet Assembly

ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 1| 01512.10| EST Front Loader Wrapper Panel
2| 1| 01512.00| EST Front Loader Wrapper
3| 1| 00115.87| Drain Screen
4| 18| 00906.00| 1/4-20 x 1/2″ Hex head Bolt
5| 1| 01505.51| EST Front Loader LH Tray Track
6| 1| 01505.50| EST Front Loader RH Tray Track
7| 6| 00940.50| 10-32 x 3/8″ Truss Head Screw
8| 1| 00120.40| EVA Power Drain Cover
9| 4| 01145.00| Leg Ass’y 10″ w\Adjustable Socket
10| 4| 00914.00| 1/4-20 x 3/4″ Hex Head Bolt
11| 1| 01577.21| S/S Scrap Trap Drawer
12| 1| 01573.30| Sani Mount/Drain Lid
---|---|---|---
13| 1| 01577.10| Scrap Trap Body
14| 1| 1502.90| EST Pan
15| 1| 01579.50| EVA Splash Card
16| 4| 01572.10| SS Leg
17| 1| 01502.95| EST Stand
18| 4| 01310.00| Bullet Foot
19| 1| 00120.02| Thermometer (Bi Metal)
20| 1| 0556.10| Reed Switch – ISI
21| 1| 14558.30| EST Front Loader Body Magnet Holder
22| 2| 00557.80| Door Magnet (L-1X/CMA-180UC/GL-X)
23| 1| 14506.30| EST Front Loader Gasket Bracket

Door Assembly

ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 1| 14506.00| Door for L-1X16
2| 2| 04517.60| Door Support Rod Block
3| 1| 14570.00| Door Hinge (RH)
4| 1| 14570.50| Door Hinge (LR)
5| 2| 04919.00| Door Rod Screw Pin for Door
6| 1| 04918.60| Door Support Rod Right
7| 1| 04919.50| Door Support Rod Left
8| 3| 00557.80| Door Magnet
9| 2| 00970.60| 6 32 x 1/2″ Flathead Screw
10| 1| 14558.61| Door Magnet Holder
---|---|---|---
11| 2| 00965.00| 06-32 Lock Nut
12| 2| 00605.30| Door Rod Spacer
13| 2| 04517.15| Door Stop (Parallel)
14| 10| 00912.00| 1/4″-20 Nylon Lock Nut
15| 14| 00924.00| 1/4″ SS Washer
16| 4| 00914.10| 1/4″-20 x 5/8” Hex Head Bolt
17| 2| 14518.00| Splash Guard
18| 4| 00924.00| 1/4 SS Washer

Control Box Assembly

Note: Wiring Harness (V)—Part Number 00414.82—(not shown).

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 1| 00449.00| Lock and Key
2| 1| 01504.17| Control Box Lid
3| 5| 00911.50| 8-32 x 3/8” Pan Head Screw
4| 1| 00407.83| Timer, 90 Seconds
5| 1| 03470.01| Toggle Switch, Momentary
6| 1| 03408.50| Counter (Face Mount)
7| 4| 00907.00| 6-32 x 1/2″ SS Pan Head Screw
8| 4| 00917.00| 8-32 PM Nut
9| 1| 01503.19| Control Box Body
10| 4| 00916.00| 6-32 pm nut
11| 3| 00415.00| Peristaltic Pump Assembly *****
12| 4| 00906.00| 1/2-20 x 1/2″ Hex Head Bolt
13| 4| 00924.00| 1/4″ SS Washer
14| 4| 00912.00| 1/4-20 Nylon Lock Nut
15| 5| 00470.10| Toggle Switch Boot
---|---|---|---
16| 1| 00471.10| Toggle Switch Off/On 20 Amp
17| 2| 00406.00| Control Box Light, 120V, 60Hz
18| 1| 00400.00| Conduit, 3/8” Sealtite
19| 3| 00401.00| S.T. 3/8” Straight Connector
20| 1| 00454.10| 3-Pole Socket Terminal Block
21| 1| 00475.70| Toggle Switch, 15 Amp
22| 1| 13012.15| Contactor 5 kW GL-X 120V
23| 4| 03470.00| Toggle Switch
24| 1| 00404.82| Contactor Relay
25| 1| 00631.00| Ice Cube Relay
26| 1| 06232.25| CMA Energy Saver Label
27| 1| 00535.00| Control Box Lid Handle

Pump Assembly

ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 1| 00206.30| Pump Seal Kit
2| 1| 00201.00| Pump Motor 1Hp 115/208- 230V
3| 1| 03222.10| Impeller (Universal) Open
4| 1| 04207.10| Pump Base
5| 1| 03226.00| Pump O Ring Gasket
6| 1| 04207.20| Pump Cover
7| 1| 50302.40| 1 ¼ MIP X 1″ Barb Fitting
8| 1| 50302.06| 1″ MPT X 1″ Barb PVC Sch

80

Plumbing System Assembly

ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 4| 00721.00| 1/2″ Jamb Nut
2| 2| 00745.00| 1/2″ Street Elbow
3| 1| 00770.00| Water Inlet Elbow Assy
4| 1| 03603.10| 1/2″ Water Solenoid Assembly, J/E *
5| 1| 00707.00| 1/2″ Water Solenoid Repair Kit
6| 1| 00796.20| Flush Tube
7| 1| 00738.10| Water Solenoid Coil
8| 2| 00742.00| 1/2″ x 1-1/2” Brass Nipple
9| 2| 00421.51| 6-32 x 1/4″ Pan Head Screw
10| 1| 03624.00| Vacuum Breaker Assembly, Watts **
11| 1| 00760.00| 5/8” Compression x 1/2″ MIP Adapter
12| 1| 03623.00| 1/2″ Vacuum Breaker Repair Kit
13| 1| 03624.25| 1/2″ Vacuum Breaker Bonnet, Brass
14| 1| 00739.50| Vacuum Breaker Cap, SS (fits ½” or ¾”)
15| 1| 03603.20| 1/2″ Water Solenoid Bonnet
---|---|---|---
16| 1| 00786.00| Water Solenoid Valve Plunger w/Spring
17| 1| 00706.10| Valve Plunger, Spring Only
18| 1| 00770.10| 5/8 Compression Fitting Nut
19| 1| 00770.20| 5/8 Compression Fitting Ring
20| 1| 00748.00| Sprinkler Head
21| 1| 03101.45| Hose Clamp #4 Size #002 SS
22| 1| 14508.50| Plumbing Bracket
23| 1| 03801.00| 10-32 Lock Nut
24| 2| 00924.00| 1/4 SS Washer
25| 1| 00940.50| 10-32 x 3/8 Truss Head Screw
26| 1| 41062.00| 1/2 Strainer Ball Valve NPT
27| 1| 41062.10| 1/2 Ball Valve Strainer Only

Spray System Assembly

ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 4| 00914.00| 1/4-20 x 3/4″ Hex Head Bolt
2| 9| 00924.00| 1/4″ SS Washer
3| 4| 00912.00| 1/4-20 Nylon Lock Nut
4| 1| 00966.10| 10-32 x 1/4″ Hex Head SS Bolt
5| 2| 00341.00| Spray Arm Bearing
6| 2| 00304.07| Spray Arm A/C Series
7| 4| 00308.50| Spray Arm End Plug SS
8| 1| 00305.20| Spray Manifold, EST/N- EVA
9| 1| 04306.00| Square Manifold Gasket
---|---|---|---
10| 1| 03108.61| Transfer Hose 1”
11| 2| 03101.00| Hose Clamp
12| 1| 00905.82| 1/4-20 x 3/8” Truss Head Bolt
13| 1| 00357.20| Lower Spray Base, N EVA 2007
14| 4| 0363.50| Spray Base Pull Lock Pin
15| 1| 50302.06| 1″ MPT X 1″ Barb PVC Schedule 80
16| 1| 00302.84| Spray Base 0-Ring, E-VA

Power Drain Assembly (Prior to 11-2007)

ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 2| 00938.82| 1/2″ Drain Bushing, Brass (V)
2| 4| 03801.00| 10-32 Lock Nut
3| 1| 00906.82| 1/4-20 x 5/8” Socket Head Screw
4| 1| 04103.14| Drain Spring (V)
5| 1| 00108.83| Drain Actuator Arm (includes #3)
6| 1| 00109.60| Drain Actuator Shaft (V)
7| 1| 00104.50| Drain Motor, 120V 60Hz
8| 2| 00109.40| Shoulder Nut, SS
8A| 2| 00109.50| 10-32 x 1” Stud
---|---|---|---
9| 1| 01511.86| Drain Motor Bracket
10| 2| 00941.00| 10-32 x 5/8” Pan Head Screw
11| 1| 01520.82| Diaphragm Support Disk, 1-1/8”
12| 1| 00121.60| Drain Diaphragm
13| 1| 00912.00| 1/4-20 Nylon Lock Nut
14| 1| 01521.82| Diaphragm Support Disk, 2”
15| 2| 04806.00| #10 Brass Washer

POWER DRAIN ASSEMBLY INSTRUCTIONS

POWER DRAIN KIT

P/N 00104.95

Power Drain Retrofit Kit p/n 00104.95 (11-14-07 to Current)

1. Remove drain lid and power drain cover (see drawing B).
2. Remove hardware securing drain motor. Discard all hardware holding motor in place.
3. Remove and discard motor bracket from motor, but save two (#10) 10-32 screws.
4. Install hardware (#2, #8, #15). Thread two (#8) studs through tank and secure in place with (#2) nylon lock nuts. On the outside of tank install (#15) thin nut onto the (#8) stud and secure. NOTE: The (#15) thin nut serves a very important purpose in drain function.
5. From kit install new drain motor bracket to drain motor with two saved (#10) 10-32 screws.
6. Remove drain shaft by loosening (#3) screw on (#5) drain actuator arm. Discard drain shaft.
7. Install the new (#6) drain shaft from the kit and align drain actuator arm to the tank using the (#3) set screw. Make sure the flat side of the (#6) drain shaft has the (#3) set screw tightening against it.
8. Install (#4) drain spring properly on drain shaft and pay particular attention to the positioning of the long arm on spring. The long arm will rest against the top right side of drain motor bracket. (See drawing A). Install short end of spring into slot of drain shaft. (See figure C).
9. Align the shaft of the (#7) drain motor with (#6) drain actuator shaft slot as motor is placed into position. Drain motor bracket with motor attached is secured to (#8) studs using (#2 and #17) nylon lock nuts and washers.
10. Grease the drain shaft and (#1) drain bushings. Replace drain lid and drain cover. When drain kit has been completed, energize drain several times and check its function. NOTE: Remove electrical spade connectors from wires leading to drain motor and replace with two (#16) flag terminals supplied in drain kit. This will allow proper clearance between drain lid and flag terminals.

_ NOTE: _Items in bold are included in the Power Drain Kit. “All items in power drain kit must be used for drain to operate properly”.

Peristaltic Pump Assembly

ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 1| 00416.00| Peristaltic Pump Motor
2| 1| 00417.10| Peristaltic Pump Block
3| 2| 00919.00| 10-32 x 1-1/2” Pan Head Screw
4| 1| 00918.10| 10-32 x 1-1/2” Fillister Head Screw
5| 1| 00418.00| Peristaltic Pump Block Cover
6| 1| 03415.50| Flex-Tight Fitting
7| 4| 00911.00| 8-32 x 1/2″ Pan Head Screw
8| 1| 2257.00| Squeeze Tube
---|---|---|---
9| 1| 00419.00| 2-Bearing Rotor Assembly
10| 2| 00448.00| Barrel Connector, Male
11| 1| 00425.51| Chemical Tubing, Blue
1| 00425.53| Chemical Tubing, Red
1| 00425.54| Chemical Tubing, White
12| 3| 00443.00| Tube Stiffener
13| 1| 00422.50| Rotor Spacer

Sustainer Heater (Optional)

Contacts

CMA DISHMACHINES

• 12700 KNOT STREET
• GARDEN GROVE, CALIFORNIA 92841
• 800-854-6417
• FAX: 714-895-2141
• www.cmadishmachines.com
• 12700 Knott Avenue
• Garden Grove, CA 92841
• For Questions Call: 800-854-6417
• 714-898-8781
• FAX: 714-895-2141
• www.cmadishmachines.com

References

• CMA Dishmachines – Commercial Glass & Warewashing Equipment
• CMA Dishmachines - Parts and Supplies | USA-CLEAN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>