CMA DISHMACHINES UC65e M3 High Temperature Undercounter User Manual

June 1, 2024
CMA Dishmachines

CMA DISHMACHINES UC65e M3 High Temperature Undercounter

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-1

Product Information

Specifications

Product Usage Instructions

Wash Pump/Motor Assembly
The wash pump/motor assembly consists of various components listed in the parts manual. Follow these steps to assemble:

  1. Refer to the parts manual for the list of components and their corresponding part numbers.
  2. Ensure all parts are clean and undamaged.
  3. Begin assembling in the order specified in the manual, starting with the screw and proceeding to the impeller housing cover, nut, washers, impeller, pump seal, gasket, and backing plate.
  4. Complete assembly by securing all parts as per the manual instructions.

Booster
The booster section includes components for enhancing the dishwasher’s performance. Here’s how to set it up:

  1. Check the parts manual for the booster components required.
  2. Inspect each part for any damage or defects.
  3. Follow the manual’s guidelines to install the thermistor, clamps, hoses, nuts, and thermostat in the correct order.

Control Panel
Setting up the control panel ensures proper functionality of the dishwasher. Here’s a guide:

  1. Refer to the parts manual to identify all control panel components.
  2. Inspect each part thoroughly before installation.
  3. Install switches, labels, screws, facia panels, and other components as per the manual’s instructions.
  4. Connect all wiring harnesses and jumper wires securely.

Power Wiring Box
The power wiring box is crucial for electrical connections. Here’s how to set it up:

  1. Review the parts manual to locate all necessary components for the power wiring box.
  2. Inspect each part for quality and completeness.
  3. Assemble the connection box, cover, wiring box, and other components following the manual’s step-by-step instructions.
  4. Ensure all wiring is correctly connected and secured.

Frequently Asked Questions (FAQ)

  • Can I use different voltage specifications for the wash pump/motor assembly?
    The wash pump/motor assembly is designed for specific voltage requirements. Using different specifications may damage the unit and void the warranty.

  • How often should I clean the booster components?
    It is recommended to clean and inspect the booster components regularly, ideally as part of your routine maintenance schedule to ensure optimal performance.

  • What should I do if I encounter issues with the control panel display?
    If you face any issues with the control panel display, refer to the troubleshooting section in the user manual or contact customer support for assistance.

PART LIST

Pump and Motor

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-2

ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 9| 02103.01| Screw, M4, Phil, Pan Head
2| 1| 02103.02| Impeller Housing Cover
3| 1| 02107.01| Nut, M6 (Left-hand thread)
4| 1| 02103.04| 1/4″ Lock Washer
5| 1| 02103.05| 17/64″ Plain Washer
6| 1| 02107.02| Impeller
7| 1| 02103.07| Pump Seal
8| 1| 02103.30| Pump Gasket
9| 1| 02107.03| Pump Backing Plate
10| 9| 02103.08| Nut, M4
---|---|---|---
11| 1| 02103.10| Pump Motor Assm, 220V
12| 1| 02103.37| Motor Fan Cover
13| 1| 02103.11| Capacitor, 16 μF
14| 1| 02107.04| Wash Pump Bracket
15| 2| 02107.05| Bolt, Hex Flange 1/4-20 X 3/8″ SST
***|  | 02103.10| Motor unavailable as separate part

Booster

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-3

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 1| 02107.0| Thermistor
2| 1| 02107.11| Tee, Rinse
3| 4| 02103.21| Clamp, Hose
4| A/R| 03107.50| Hose, Rubber 1/2″x0.84″ OD
5| 2| 00965.00| Nut, Grip 6-32 W/ Nylon Insert SS
6| 1| 02103.19| Thermostat, High Limit 240f
7| 1| 03232.00| Plug, 1/8″
---|---|---|---
8| 1| 02103.14| Gasket
9| 1| 02103.12| 4kW 208V 40Rise Element ***
10| 1| 02107.09| Plug, 1/8 Hex Countersunk SS
11| 2| 02103.16| Bolt, Hex Flange, 1/4-20×3/8″ SS
12| 1| 02106.01| Booster Tank, Welded

Control Panel

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-4

ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 1| 02107.15| Switch, Rocker DPST 250V Neon
2| 1| 02106.51| Label, Facia UC65e M3
3| 2| 02103.58| Gasket, Steam
4| 2| 02107.17| Standoff, LED Display Board
5| 4| 02104.91| Screw, 6-18×1/4″ Panhead Phil SS
6| 1| 02106.52| Panel, Facia UC65e M3
7| 2| 02104.68| Nut, 10-32
8| 2| 02107.20| Screw, #8 x 3/8″
9| 1| 02107.21| Kit, Control Board
10| 1| 00911.10| Screw, 8-32×3/8 Truss HD
11| 1| 02103.57| Prime Switch
---|---|---|---
12| 1| 02103.51| Contact, Switch Momentary (N.O.)
13| 1| 02103.52| Housing, Push Button Switch
14| 1| 02103.53| Push Button, Green
15| 1| 03485.00| Switch Guard
16| 4| 04086.00| #10 Washer
17| 2| 03801.00| 10-32 Lock Nut
—| 1| 02107.22| Harness, Switch – NOT SHOWN
—| 1| 02106.83| Harness, Sensor – NOT SHOWN
—| 1| 02107.10| Harness, Main – NOT SHOWN
—| 1| 02107.10| Jumper Wire – NOT SHOWN

Power Wiring Box

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-5

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 1| 02106.02| Label, Connection Box
2| 1| 02106.03| Cover, Box Wiring
3| 1| 02106.04| Box, Wiring
4| 2| 00421.51| Screw, 6-32 X 1/4″
5| 1| 13426.50| Lug, Ground
6| 1| 00905.82| Screw, 1/4-20 X 3/8″
7| 1| 02106.05| Block, Terminal 4-Pole
8| 2| 00940.50| Screw, 10-32 X 3/8″ Truss Head
---|---|---|---
9| 1| 02106.15| Bushing, Strain Relief, Small
10| 1| 02103.48| Contactor, 3-Pole, 25/40A, 120VAC Coil
11| 2| 00940.00| Screw, 10-32 X 1/4″
12| 1| 02106.06| Relay, DPDT, 30A, 120VAC Coil
13| 1| 06202.46| Label, Ground

Fill Solenoid Valve – Effective October 2022

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-6

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 1| 03603.10| Water Valve 1/2″ 115V JE Complete
2| 1| 00738.10| Solenoid Coil, 115VAC
3| 1| 03603.20| 1/2″ Water Solenoid Bonnet
4| 1| 00786.00| JE Water Valve Plunger & Spring
5| 1| 00707.00| 1/2″ Water Solenoid Valve Repair Kit
6| 1| 40013.00| Fitting, Barb Hose
7| 1| 02106.11| Bracket, Valve, UC65e
8| 2| 02103.16| Bolt, Hex Flange 1/4-20×3/8″
9| 1| 03604.50| Fitting, Flow Disc
10| 1| 03604.10| Washer, Flow Disc

Fill Valve

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-7

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 1| 02106.53| Water Valve 115V, Incl Items 2 & 3
2| 1| 02106.54| Coil, 115VAC/60/1, 7W
3| 1| 02106.55| Solenoid Repair Kit
4| 2| 00906.52| Bolt, Hex Flange, 1/4-20X3/8″ SS
5| 1| 02106.56| Bracket, Fill Valve

Wash and Rinse Spray Assemblies

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-8

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 4| 00426.00| Washer, 5/16″ SS
2| 4| 00912.00| Nut, 1/4-20 Nylon Lock
3| 1| 02103.77| Hub, Upper Wash Arm
4| 1| 02103.78| Washer, Packing
5| 1| 02103.79| Screw, Retaining
6| 1| 02103.83| O-Ring, 2-1/8″ OD X 1-3/4″ ID X 3/16″
7| 2| 02103.82| Bearing Assembly
8| 2| 02103.98| Spacer, Nut
9| 1| 02103.83| O-Ring, 2-1/8″ OD X 1-3/4″ ID X 3/16″
10| 1| 02103.84| Hub, Lower Wash Arm
11| 1| 02103.85| Manifold, Lower FWR
12| 2| 02103.86| Wash Arm Assm, (Incl Item #7)
14| 4| 02103.88| Washer, Nylite
15| 4| 02103.89| Bolt, 1/4-20 X 1″
16| 1| 02103.90| Shaft, Lower
17| 1| 02103.91| O-Ring
18| 2| 02103.92| Hub, Rinse Arm Molded
19| 4| 02103.93| Screw, Truss Head 8-32 X 1/4″
20| 2| 02103.94| Arm, Right-Hand Rinse (7 Jets)
21| 2| 02103.95| Arm, Left-Handed Rinse (8 Jets)
22| 4| 02103.96| Cap, Rinse Arm, 5/16-24
23| 4| 02103.97| Spindle, Rinse Arm
—| –| 02103.99| Rinse Arm Assm (Incl Items 8, 18-23)

Hoses and Drain Pump

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-9

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 2| 50109.00| Clamp, Hose
2| 1| 02103.81| Hose, Upper Wash Arm
3| 8| 02103.21| Clamp, Hose Gear-type SS
4| A/R| 03107.50| Hose, Rubber 1/2″ ID X 0.84″ OD
5| 1| 02106.57| Fitting, Molded Rinse
6| 1| 02103.71| 1/2″ Vacuum Breaker
—| —| 02103.72| Vacuum Breaker Repair Kit
7| 1| 00721.00| Lock Nut, 1/2″
8| 1| 02103.69| Bracket, Vacuum Breaker
9| 2| 02103.04| Washer, Split 1/4″ SS
10| 2| 00923.50| Nut, Hex 1/4-20 SS
11| 1| N/A| Hose, Fill
13| 2| 02106.58| Barb, Hose 1/2″ X 3/8″ MPT
14| 2| 50109.00| Clamp, Hose
15| 1| 02104.13| Hose, Discharge
16| A/R| 02107.71| Hose, 5/8″ ID X 1″ OD
17| 2| 03101.00| Clamp, Hose
18| 1| 02103.18| Hose, Booster Fill
19| 1| 02106.59| Tee, 3/4″ Poly
20| 1| 02106.60| Elbow, 1/2MPTx3/8MPT Reduce 90DE
21| 1| 02106.61| Valve, Check 3/8
---|---|---|---
22| 1| 02106.62| Hose Barb, 1/2 x 3/8 MPT
23| 1| 02106.63| Coupler, 3/4″MPT x 3/4″ Hose Barb
24| 1| 02104.11| Hose, Suction Wash Pump
25| 1| 02104.05| Hose, Drain Pump Suction
26| 2| 02104.10| Clamp, Hose
27| 1| 02104.34| Elbow, Pump Suction
28| 2| 03101.00| Clamp, Hose Gear-Type
29| 1| 02104.35| Gasket, Pump Suction
30| 1| 02104.36| Flange, Pump Suction
31| 1| 02104.07| Pump, Drain
32| 2| 02107.74| Screw, #8 x 1/2″ Self-Taping
33| 2| 02103.16| Bolt, Hex Flange 1/4-20 x 3/8″ SS
34| 1| 02104.06| Bracket, Drain Pump
35| 1| 03101.00| Clamp, Hose
36| 1| 02106.19| Hose, Drain Molded
37| 1| 02106.50| Anti-Siphon Assembly Complete

Panels and Door

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-10

ITEM NO.| NO. REQ’D|

P/N

|

DESCRIPTION

---|---|---|---
1| 1| 02104.69| Wrapper, Outer Panel
2| 1| 02104.17| Gasket, Door 1/8″ x 7/8″ x 22-5/8″
3| 1| 02106.64| Panel, Front
4| 1| 02104.73| Door Welded Assm
5| 1| 02104.88| Seal, Door Hinge RH
6| 2| 02104.77| Spring, Door
7| 2| 02104.76| Arm, Door Spring
8| 1| 02106.65| Screw, 8-32 x 3/16″ Phil SS
9| 1| 02104.78| Activator, Door Switch
---|---|---|---
10| 1| 02104.87| Seal, Door Hinge LH
11| 1| 02104.63| Gauge, Pressure 0-60PSI
12| 1| 00940.50| Screw, 10-32×3/8″ Truss Head Phil SS
13| 1| 00425.54| Tubing, 1/4″ Natural
14| 1| 02106.66| Adaptor, 1/4″x1/8″NPT Female Plastic
15| 1| 02104.67| Foot, Adjusting
16| 1| 02106.13| Panel, Rear

Upper Tank

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-11

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 1| 02106.67| Screen, Scrap
2| 1| See Pg10| Seal, Door Hinge RH & LH
3| 1| 02106.68| Plate, Nut 4-40
4| 1| 02106.69| Bracket, Switch Door
5| 1| 43019.00| Switch, Door 15A
6| 2| 13826.00| Screw, 4-40×1/2″ Pan Head Phil SS
7| 2| 00965.00| Nut, Grip 6-32 W/ Nylon Insert SS
8| 1| 02106.70| Plug, 1/2″
9| 1| 02106.71| Gasket, Fiber
---|---|---|---
10| 1| 02106.72| Nut
11| 1| 02107.0| Thermister
12| 1| 02106.73| Adapter, Thermister
13| 1| 02104.18| Element, Tank 2kW 240VAC
14| 1| 02106.74| O-Ring
15| 1| 02106.75| Nut, 1/2″ NP
16| 1| 02104.28| Thermostat, Fixed Snap, 212°F

Tank Rear

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-12

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 1| 03801.00| Nut, 10-32 SS
2| 1| N/A| Clip
3| 1| 02106.76| Bracket, Sensor
4| 1| 02106.77| Sensor, Level
5| 1| 02104.54| Clamp, Hose
6| 2| 02104.56| Hose, Air
7| 2| N/A| Clamp, Double Conduit
8| 1| N/A| Clamp, 3/4″ Plated Strap
---|---|---|---
9| 1| 02107.48| Nut, Grip, 1/4-20 W/ Nylon Insert SS
10| 1| 02104.53| Trap, Air
11| 1| 02104.55| Gasket, Air Trap
12| 1| 02104.57| O-Ring
13| 1| 02104.59| Cover, Air Trap

Chemical Pumps

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-13

ITEM NO.| NO. REQ’D| ****

P/N

| ****

DESCRIPTION

---|---|---|---
1| 1| 43078.08| Label, Rinse Additive
2| 1| 43078.05| Label, Detergent
3| 2| 02104.48| Tube Stiffener, 1/2″ x 11-7/8″
4| 1| 02104.47| Strainer
5| A/R| 02106.78| Hose, 4MM ID x 6MM (1/4″) OD PVC
5a| A/R| 00425.24| Chemical Tubing, White
6| A/R| 02104.37| Hose, 1/4″ID x 3/8″OD PVC
7| 1| 02106.79| Nut
8| 1| 02104.39| Gasket
---|---|---|---
9| 1| 02106.80| Kit, Detergent Fitting
10| 1| 02106.81| Nut, Compression Rinse
11| 1| 02106.82| Nut, Chemical Tube
12| 1| 02107.14| Bracket, Chemical Pump
13| 1| 00415.00| Rinse Chemical Pump Assembly
14| 1| 00415.00| Detergent Chemical Pump Assembly
15| 1| 00931.00| Nylon Zip Tie, 4″

Detergent Pump

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-14

NO. REQ’D P/N DESCRIPTION
1 2 02104.47 Strainer
2 2 02104.48 Tube Stiffener, 1/2″ID x 11-7/8″
3 1 43078.05 Label, Detergent
4 A/R 02104.37 Hose, 1/4″ID x 3/8″OD
5 4 00931.00 4.5″ Nylon Cable Tie
6 1 02257.00 Squeeze Tube, Norprene 8″
7 1 00911.00 Screw, 8-32×1/2″ Panhead
8 1 00418.00 Peristaltic Pump Cover
9 1 00419.00 Peristaltic Pump Rotor
10 1 00919.00 Screw, 10-32 x 1-1/2″ Panhead
10a 2 00918.10 Screw, 10-32 x 1-1/2″ Flathead
11 1 00417.10 Peristaltic Pump Block (Black)
12 1 00416.00 Peristaltic Pump Motor 110V/60Hz
13 1 00448.00 Barrel Connector, Male
14 2 02104.52 1/4″ Hose Barb
15 1 00415.20 Peri Pump Assm (Incl items 6-13)

Rinse Pump

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-15

NO. REQ’D P/N DESCRIPTION
1 2 02104.47 Strainer
2 2 02104.48 Tube Stiffener, 1/2″ID x 11-7/8″
3 1 43078.05 Label, Rinse Additive
4 A/R 02104.37 Hose, 1/4″ID x 3/8″OD
5 4 00931.00 4.5″ Nylon Cable Tie
6 1 02104.58 Squeeze Tube, Norprene 1/8″
7 1 00911.00 Screw, 8-32×1/2″ Panhead
8 1 00418.00 Peristaltic Pump Cover
9 1 00419.00 Peristaltic Pump Rotor
10 1 00919.00 Screw, 10-32 x 1-1/2″ Panhead
10a 2 00918.10 Screw, 10-32 x 1-1/2″ Flathead
11 1 00417.10 Peristaltic Pump Block (Black)
12 1 00416.00 Peristaltic Pump Motor 110V/60Hz
13 1 00448.00 Barrel Connector, Male
14 2 02106.12 1/8″ Hose Barb
15 1 00415.20 Peri Pump Assm (Incl items 6-13)

Dish Racks, PRV

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-16

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 1| 12960.01| Dish Rack, Flat
2| 1| 12960.03| Dish Rack, Peg
3| 1| 13602.20| 1/2″ Pressure Regulator, OPTIONAL

Optional Chemical Alarm

CMA-DISHMACHINES-UC65e-M3-High-Temperature-Undercounter-
FIG-17

ITEM NO.| NO. REQ’D| __

P/N

| __

DESCRIPTION

---|---|---|---
1| 3| 00400.00| Conduit, 3/8” Sealtite
2| 1| 00401.00| S.T. 3/8” Straight Connector
3| 1| 00402.00| S.T. 90 Degree 3/8” Connector
4| 1| 00406.00| Control Box Light, .5” Diameter, Red
5| 1| 00435.00| Squeeze Tube, 8”
6| 1| 00521.00| Wire, 18 Gauge, Orange, 6 ft.
7| 1| 00531.00| Wire, 18 Gauge, White, 6 ft.
8| 5| 00931.00| Wire Tie, Small
---|---|---|---
9| 1| 12510.00| Sanitizer Alarm Box Assembly
10| 1| 12511.00| Sanitizer Low Level Vacuum Switch
11| 1| 12512.00| Sanitizer Alarm Buzzer, 120 Volts
12| 4| 40126.10| #10 x 3/4″ Sheet metal Screw
13| 4| 40127.00| Wall Anchors
14| 1| 00426.00| Y Hose Connector, 3/16”

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

CMA Dishmachines User Manuals

Related Manuals