eurowise GEN 1 Air Suspension Skid Plate Instruction Manual
- May 15, 2024
- eurowise
Table of Contents
Air suspension Skid plate (Passenger side)
GEN 1 Air Suspension Skid Plate
Here is the contents on the kit.
1 skid.
1 bag of hardware including 1 bracket and 1 bolt.
440 SPRINGBROOK ROAD. CHARLOTTE, NC 28217 |
704-559-8100
INFO@EUROWISE.COM |
WWW.EUROWISE.COM |
SHOP.EUROWISE.COM
Remove this bolt first and install supplied bracket. If you install the bracket crooked you can still access the bracket later on with the shield installed with the hole we created in the skid. It is easier to install the shield with this bracket installed first so when you remove the other two mounting bolts the compressor doesn’t move.
![eurowise GEN 1 Air Suspension Skid Plate
- Remove 3](https://manuals.plus/wp-content/uploads/2024/03/eurowise-GEN-1 -Air-Suspension-Skid-Plate-Remove-3.png)
Remove the remaining two bolts.
Now Install the shield using the 2 13mm compressor bolts and the last bolt is the Screw used to hold the OEM plastic panel on the chassis.
440 SPRINGBROOK ROAD. CHARLOTTE, NC 28217 |
704-559-8100
INFO@EUROWISE.COM |
WWW.EUROWISE.COM |
SHOP.EUROWISE.COM
References
- Specializing in European Service, Performance and Fabrication – Eurowise Performance
- Eurowise Audi, BMW, Volkswagen, Mercedes, & Porsche Service