eurowise W463 Front and Rear Pan Hard Bar Installation Guide
- May 15, 2024
- eurowise
Table of Contents
eurowise W463 Front and Rear Pan Hard Bar Installation
Product Information
Specifications:
- Product Name: Front and Rear Pan Hard Bar
- Manufacturer: Eurowise
- Model: W463
- Location: Charlotte, NC
- Contact: 704-559-8100 | [email protected]
Product Usage Instructions
Front Bar Installation:
- Remove both upper and lower 24mm pan hard bar nuts and bolts.
- Set OEM bar side by side with Eurowise panhard bar and adjust close to stock as possible for easier installation and alignment.
- Install the new pan hard bar with the adjuster at the top.
Rear Bar Installation:
- Rear bar installation may require two people.
- Remove the lower fuel tank shield.
- Remove nut and 24 mm bolt on the lower panhard bar. Upper nut can be removed with the help of a friend using pry bars.
- Set OEM bar side by side with Eurowise panhard bar and adjust close to stock as possible for easier installation and alignment.
FAQ (Frequently Asked Questions):
-
Q: Do I need any special tools for the installation?
A: Basic hand tools like wrenches, sockets, and pry bars are recommended for the installation process. -
Q: Can I install the pan hard bars alone?
A: While some steps may require assistance, it is possible to install the pan hard bars alone with proper tools and precautions. -
Q: How do I contact Eurowise for product-related queries?
A: You can reach out to Eurowise at 704-559-8100 or email them at [email protected]. You can also visit their website at www.eurowise.com or shop online at shop.eurowise.com.
W463 front and rear pan hard bar installation
Front bar installation is pretty straight forward. Remove both upper and lower 24mm pan hard bar nuts and bolts.
Set OEM bar side by side with Eurowise panhard bar and adjust close to stock as possible to make install and alignment easier.
Install new pan hard bar with the adjuster at the top.
REAR BAR
- Rear bar will require two people if possible. Remove lower fuel tank shield.
- Remove nut and 24 mm bolt on the lower panhard bar. Upper nut can be removed but the bolt cannot be removed without help of a friend. You will need to use two long pry bars. One will be used to pry the fuel tank skid plate bracket away to clear the bolt head. Using another pry bar the bolt can be pulled out at the same time. This is the quickest option. The long route would be to remove that lower skid plate completely.
- Set OEM bar side by side with Eurowise panhard bar and adjust close to stock as possible to make install and alignment easier.
IF YOU HAVE ANY QUESTIONS, COMMENTS, OR CONCERNS RELATED TO YOUR PRODUCT
PLEASE CONTACT US!
440 SPRINGBROOK ROAD. CHARLOTTE,
NC 28217 | 704-559-8100
[email protected] |
WWW.EUROWISE.COM |
SHOP.EUROWISE.COM
References
- Specializing in European Service, Performance and Fabrication – Eurowise Performance
- Eurowise Audi, BMW, Volkswagen, Mercedes, & Porsche Service