Levoit LV600S Series Smart Hybrid Ultrasonic Humidifier User Manual
- June 12, 2024
- Levoit
Table of Contents
- Levoit LV600S Series Smart Hybrid Ultrasonic Humidifier
- Product Information
- Product Usage Instructions
- Package Contents
- Specifications
- SAFETY INFORMATION
- General Safety
- GETTING TO KNOW YOUR SMART HUMIDIFIER
- CONTROLS
- FILLING & REFILLING
- VESYNC APP SETUP
- USING YOUR SMART HUMIDIFIER
- CARE & MAINTENANCE
- TROUBLESHOOTING
- FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
- WARRANTY INFORMATION
- CUSTOMER SUPPORT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Levoit LV600S Series Smart Hybrid Ultrasonic Humidifier
Product Information
Model Line: LUH-A602S
Model: LUH-A602S-WUS
The Smart Hybrid Ultrasonic Humidifier is a high-quality humidifier designed to improve the air quality in your home or office. It combines ultrasonic technology with smart features to provide optimal humidity levels and a comfortable environment.
Specifications
- Power Supply: AC 120V, 60Hz
- Rated Power: 280W
- Water Tank Capacity: 1.58 gal / 6 L
- Max Cool Mist Output: 300 mL/h
- Max Warm Mist Output: 550 mL/h
- Max Run Time: 50 hours on low mist setting
- Noise Level: Lowest < 28dB (Low Cool Mist)
- Effective Range Dimensions: 11.6 x 7.7 x 11.3 in / 29.4 x 19.5 x 28.8 cm
- Weight: 6 lb / 2.7 kg
Note: The humidifier may run for a longer or shorter time depending on
the environmental temperature and humidity.
Note: To access additional smart humidifier functions, download the free
VeSync app
Product Usage Instructions
Getting Started
- Remove all packaging.
- Clean the water tank and water tank cover before first use.
Note: Check to make sure that the water filter is correctly in place. If not, then rotate the filter clockwise to secure it in place.
- Choose a hard, flat location for the humidifier at least 12 inches / 30 cm away from any walls. The surface must be water-resistant. [Figure 1.1]
Package Contents
- Smart Ultrasonic Humidifier
- Aroma Pad (1 Pre-Installed)
- Absorption Pad (1 Pre-Installed)
- Water Filter Sponge (1 Pre-Installed)
- Cleaning Brush
- User Manual
- Quick Start Guide
Specifications
Power Supply | AC 120V, 60Hz |
---|---|
Rated Power | 280W |
Water Tank Capacity | 1.58 gal / 6 L |
Max Cool Mist Output | 300 mL/h |
Max Warm Mist Output | 550 mL/h |
Max Run Time | 50 hours on low mist setting |
Note: The humidifier may run for a longer or shorter time depending on the environmental temperature and humidity.
Noise Level| Lowest: < 28dB (Low Cool Mist)
Highest: < 40 dB (High Warm Mist)
Effective Range| 430–753 ft² / 40–70 m²
Dimensions| 11.6 x 7.7 x 11.3 in /
29.4 x 19.5 x 28.8 cm
Weight| 6 lb / 2.7 kg
Note: To access additional smart humidifier functions, download the free VeSync app
READ AND SAVE THESE INSTRUCTIONS
SAFETY INFORMATION
To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines.
General Safety
- Only use the humidifier as described in this manual.
- Place the humidifier and cord so that it will not be knocked over. Do not place near large pieces of furniture or in high-traffic areas.
- When not in use, turn the humidifier off and disconnect from power by removing the plug from the outlet.
- Do not use the humidifier in wet environments.
- Keep the humidifier out of reach from children.
- Do not open the base or remove the water level sensor for self-servicing.
- Always unplug your humidifier from the power outlet before cleaning your humidifier or detaching the water tank from the humidifier base.
- Always make sure to place the humidifier on a flat, level surface before operation.
- Only fill the water tank with clean water. Never fill the water tank with any other liquids.
- Do not place the humidifier near sources of heat, such as stovetops, ovens, or radiators.
- Do not place the humidifier directly on floors, carpets, or rugs.
- Do not use other items as replacement parts for this product.
- Do not cover the nozzles while the humidifier is on. Doing so may damage the humidifier.
- Remove the water tank from the base before moving the humidifier.
- Do not immerse the humidifier base, power cord, or plug in water.
- Do not clean the humidifier immediately after turning it off, especially if it has been diffusing warm mist. Allow the humidifier to cool down completely before cleaning.
- If the humidifier is damaged or is not functioning properly, stop using it and contact Customer Support immediately (see page 27).
- This humidifier is not to be used by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Supervise children when they are near the humidifier.
- Children should not clean or perform maintenance on the humidifier without supervision.
- Not for commercial use. Household use only.
Caution: Risk of Leaks and Electric Shock
- Do not add essential oils, supplemental water treatment liquids, or water filters into the water tank or base chamber. This will damage the humidifier and cause leaks. Only add essential oils to the aroma pad.
Electromagnetic Fields (EMF)
- This humidifier complies with all standards regarding electromagnetic fields (EMF).
- If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.
Power & Cord
- Ensure that the plug fits properly into a polarized socket.
- Do not handle the power cord or plug with wet hands. Keep the plug and power cord away from liquids.
- Your humidifier has a polarized plug (one prong is wider than the other), which fits into a polarized outlet only one way. This is a safety feature to reduce the risk of electric shock. If the plug does not fit, reverse the plug. If it still does not fit, do not use the plug in that outlet. Do not bypass this safety feature.
- If the power supply cord is damaged, it must be replaced by Arovast Corporation or similarly qualified persons in order to avoid an electric or fire hazard. Please contact Customer Support
- Unplugging the power cord will disable remote control of the humidifier and temporarily disconnect the humidifier from VeSync and other third-party apps.
GETTING TO KNOW YOUR SMART HUMIDIFIER
Function Diagram
- A. Nozzles
- B. Top Cover
- C. Handle
- D. Water Tank
- E. Water Filter
- F. Water Filter Sponge
- G. Base
- H. LED Display
- I. Control Panel
- J. Aroma Box
- K. Aroma Pad
- L. Humidity Sensor (In Aroma Box Compartment)
- M. Mist Tube
- N. Mist Channel
- O. Noise Silencer
- P. Absorption Pad
- Q. Air Outlet
- R. Float Brackets
- S. Inner Chamber
- T. Power Cord
- U. Water Outlet Valve
- V. Heating Element
- W. Transducer
- X. Float
Indicators
- A. Sleep Mode Indicator
- B. Timer Indicator
- C. Wi-Fi® Indicator
- D. No Water Indicator
- E. Relative Humidity (RH) Percentage
- F. Warm Mist Setting Indicator
- G. Mist Level Indicator
Buttons
- H. On/Off Button
- I. Mist Level Button
- J. Humidity Level Button
- K. Timer Button
- L. Warm Mist Button
- M. Sleep Mode Button
Mist Level Indicator (Blue)
- Low Mist
- Medium Mist
- High Mist
Warm Mist Indicator (Orange)
- Heat Off (Cool Mist)
- Low Heat
- Medium Heat
- High Heat
CONTROLS
Note: You can also use the VeSync app to control these functions, as well as additional app-only features.
On/Off Button
- Press to turn the humidifier on/off.
- Press and hold for 5 seconds to pair with the VeSync app. See the VeSync in-app instructions for more information.
- Press and hold for 15 seconds to reset the humidifier. This will restore the humidifier’s default settings and disconnect it from Wi-Fi® and the VeSync app.
Mist Level Button
- Press repeatedly to cycle through mist level settings: low, medium, and high mist.
- Press and hold for 3 seconds to turn the display off. Press any button to turn the display back on.
Humidity Level Button
- Sets the relative humidity (RH) percentage. The humidifier will automatically stop misting when the room reaches the target humidity level.
- Press and hold for 2 seconds to cancel your humidity level setting.
Timer Button
- Sets or cancels a timer
Warm Mist Button
- Cycles through warm mist settings: low heat, medium heat, high heat, and heat off
Sleep Mode Button
- Press to turn Sleep Mode on/off
Wi-Fi Indicator
- Turns on, off, or blinks to indicate pairing status. See the VeSync in-app instructions for more information.
No Water Indicator
- Blinks when there is no water in the tank. After this indicator blinks 10 times, the humidifier will turn off. Refill the tank and properly place it on the base to use your humidifier.
- Lights up when the water tank is removed. Remains on until the tank is replaced.
GETTING STARTED
- Remove all packaging.
- Clean the water tank and water tank cover before first use.
- Note: Check to make sure that the water filter is correctly in place. If not, then rotate the filter clockwise to secure it in place.
- Choose a hard, flat location for the humidifier at least 12 inches / 30 cm away from any walls. The surface must be water-resistant. [Figure 1.1]
- Do not place the humidifier directly on floors, carpets, or rugs.
- Mist should be directed away from walls, furniture, bedding, and appliances. Avoid letting too much mist fall on the side of the humidifier with the aroma box, as this may interfere with the sensor inside the aroma box.
- Note: The humidity sensor and an air inlet are both located inside the aroma box. Placing the humidifier away from walls will also ensure that the inlet and sensor function properly.
FILLING & REFILLING
Note: Make sure the water tank is clean before filling.
- Remove the water tank cover.
- Use the handle to remove the tank from the base. Fill the tank with room-temperature water. Do not fill with hot water.
- Note:
- We recommend using purified water to fill the tank.
- Using tap water may result in a speck of white dust (dried minerals) on surfaces.
- Replace the water tank cover and place the tank back on the base. [Figure 2.1]
Caution
- Do not add water directly into the base chamber. [Figure 2.2]
- Do not add essential oils into the humidifier. Only add essential oils to the aroma pad. [Figure 2.4]
- Do not add water through the mist tube. [Figure 2.3]
- Do not use water treatment liquids or third-party water filters in this humidifier. [Figure 2.5]
VESYNC APP SETUP
Note: Due to ongoing updates and improvements, the VeSync app may be slightly different than shown in the manual. In case of any differences, follow the in-app instructions.
- To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store.
- Note: For Android™ users, choose “Allow” to use VeSync.
- Open the VeSync app. If you already have an account, tap login. To create a new account, tap Sign Up.
- Note: You must create your own VeSync account to use third-party services and products. These will not work with a guest account. With a VeSync account, you can also allow your family and friends to control your smart humidifier.
- Follow the in-app instructions to set up your smart humidifier.
Note:
- You can use the VeSync app to connect your smart humidifier to Amazon Alexa or Google Assistant™. Follow the in-app instructions to connect VeSync to your voice assistant.
- Your phone must have Location turned on while your phone is connecting to your smart humidifier. This is required to establish the Bluetooth® connection. You can turn Location off after your smart humidifier is finished connecting to the VeSync app.
Wi-Fi Connection
- To disconnect Wi-Fi, press and hold for 15 seconds until the Wi-Fi indicator turns off. This will restore the smart humidifier’s default settings and disconnect it from the VeSync app.
- To reconnect, please follow the instructions in the VeSync app for adding a device.
USING YOUR SMART HUMIDIFIER
Note: Using the VeSync app allows you to control your smart humidifier remotely and access additional functions and features
-
Plug in the humidifier. The humidifier will light up, then turn off.
-
Press to turn your humidifier on. The humidifier will start misting.
- Note: If there is no water in the tank, will flash 10 times, and the humidifier will turn off. Fill the water tank (see Getting Started,
-
Press repeatedly to cycle through mist settings: Low, Medium, and High.
-
Rotate the nozzles to adjust the direction of the mist. [Figure 3.1]
- Note:
- Direct the nozzles away from any furniture, walls, or other objects to prevent them from getting wet.
- Do not inhale the mist directly from the nozzles.
-
Optionally, use the controls or the VeSync app to turn on warm mist, activate Sleep Mode, and more (see Controls, page 7).
-
When your room has reached your preferred humidity level, turn the humidifier to a lower setting, or turn it off. A comfortable humidity level is between 40% and 60%.
Note: You can also set the humidifier to automatically stop misting when the room reaches a specific humidity level (see Humidity Level, page 12). -
Press to turn your humidifier off.
Warm Mist
- Press to turn on the warm mist. Keep pressing to increase the heat setting for the mist, and to turn the warm mist off.
- Caution: Mist may be hot. Do not place your bare hands, face, or other exposed skin over the nozzles while using warm mist. [Figure 3.2]
- The humidifier may take 15 minutes to warm up before producing a warm mist.
- The warm mist function can be used during Sleep Mode.
Humidity Level
- You can customize the humidity level that the humidifier will maintain. The humidifier will automatically stop misting when the room reaches the target humidity level.
- Press repeatedly to set a humidity level between 40% and 80% Relative Humidity (RH).
- The display will flash 3 times to confirm your selection, then return to showing the current humidity percentage in the room.
- Note:
- The humidifier will automatically mist for 15 seconds after being turned on, even if the room has reached the set humidity level.
- Press once to see the selected humidity level again. Keep pressing to change the humidity level.
- You can still adjust the mist level, the timer, and the warm mist setting after setting the humidity level.
- The humidifier will not increase the mist level when a humidity level percentage is set, only stop misting once the set humidity level is reached. If you want the humidity in your room to increase faster, set the humidifier to a high mist level.
- Once the humidity of the environment reaches the humidity you set, the humidifier will automatically stop misting.
- The humidifier will continue detecting the humidity level in the room. It will start misting again when the humidity drops to 5% below the set level.
- Note:
- To cancel the set humidity level, press and hold for 2 seconds, which will set the humidity level to “–”. The display will flash 3 times to confirm, then return to showing the current humidity percentage in the room.
- When the humidity level is set to “–” the humidifier will automatically keep misting at the current mist level until it runs out of water.
Timer
- You can set an auto-shutoff timer between 1 and 12 hours.
- Press repeatedly to choose a time in increments of 1 hour. When you stop pressing, the display will flash 3 times and the timer will start.
- The humidifier will automatically power off once the timer is finished.
- To cancel a timer, press and hold for 3 seconds. You can also press repeatedly until the display reads “–” or use the VeSync app.
Sleep Mode
- Sleep Mode changes the humidifier’s mist setting to an automatic mode and turns off the display lights.
- Press to turn Sleep Mode on/off.
- Sleep Mode automatically turns off warm mist to reduce noise. You can press to turn warm mist back on.
- Sleep Mode uses the humidity sensor to detect the relative humidity in the room and automatically adjusts the mist level to maintain 50–60% relative humidity.
Room Relative Humidity | Automatic Mist Level |
---|---|
Under 50% | High |
50–55% | Medium |
55–60% | Low |
Over 60% | Automatic Shutoff |
- When Sleep Mode is on, you can press any button to wake up the display. If you stop touching the display, the display will turn off again after 6 seconds.
- When Sleep Mode is on, you can use all other settings except changing the mist level or humidity level. If you change the mist level or humidity level, Sleep Mode will turn off.
- When Sleep Mode is turned on, the humidifier will automatically mist for 15 seconds, even if the room’s humidity level is over 60%.
Turning Off the Display
- The display will automatically dim after 30 seconds of inactivity.
- To turn off the display, press and hold for 3 seconds.
- To turn the display back on, press any button.
Using the Aroma Box
- Your humidifier can be used for aromatherapy.
- Push the aroma box at the back of the base and pull it out. [Figures 3.3]
- Put 8–10 drops of essential oils on the aroma pad. [Figure 3.4]
- Place the aroma box back into the humidifier.
- Turn on the humidifier. The humidifier will automatically diffuse aroma when used.
Note:
- Do not add essential oils, water treatment liquids, or third-party water filters into the water tank or base chamber. Only add essential oils to the aroma pad. [Figure 3.5]
- The aroma pads can be cleaned and reused after diffusing essential oils (see Cleaning the Aroma Pad,).
- This humidifier uses a small heat-based aroma diffuser. The aroma is intended to be light.
Absorption Pads
- The mineral absorption pads help reduce mineral buildup (scale) inside the humidifier, especially on the heating element.
- Note: For information on replacement aroma pads or absorption pads,.
Memory Function
- The humidifier will remember your settings for Mist Level, Humidity Level, Warm Mist, and Wi-Fi settings when turned off or unplugged, and will resume those settings when turned back on.
- The humidifier will not remember Sleep or Timer settings, and the display will automatically turn back on when the humidifier is turned back on.
Automatic Shutoff
- The humidifier will automatically turn off when all of the water in the tank has been diffused. will show on the display and blink 10 times before the humidifier turns off. Fill the water tank.
- If the tank has been removed from the base, the humidifier will automatically stop misting. will show on the display, and will turn off once the tank is placed properly back on the base.
VeSync App Functions
- The VeSync app allows you to access additional smart functions, including those listed below.
Remote Control From Your Phone
- Turn the humidifier on/off.
- Cycle through mist levels and heat levels, and turn Sleep Mode on/off.
- Turn the display lights light on/off.
Monitor Humidity Levels
- Check current humidity levels in the humidifier’s environment.
Set Timers & Schedules
- Program individual timers or create a schedule for your smart humidifier.
Third-Party Voice Control
- Compatible with Amazon Alexa and
- Google Assistant™ for voice commands.
- Note: The VeSync app is continually updated and app features will expand.
IMPORTANT TIPS
- Your humidifier must have the correct level of water in the base chamber to work properly. If there is too much water in the base chamber, the humidifier cannot create mist.
- Do not place the humidifier on an inclined surface.
- Never pour water directly into the base chamber. [Figure 4.1] Only add water to the water tank. The humidifier will automatically release the correct amount of water into the base chamber.
- Avoid moving or shaking the humidifier.
- This may cause the water tank to release too much water into the base chamber.
- Before moving the humidifier, turn it off, unplug it, and remove the water tank. Empty any excess water from the base chamber.
CARE & MAINTENANCE
Note:
- All maintenance should be done on a water-resistant surface, such as a kitchen counter.
- Change the water daily to avoid bacteria growth.
- Use a tissue or cloth to clean the nozzles regularly.
- If not using the humidifier for 1 week or longer, do not leave water inside. Clean and dry the humidifier instead.
Cleaning
- You should clean your humidifier every week, and when you’re ready to store it.
Note:
- Never immerse the base in water or liquid. Do not place any part of the humidifier in a dishwasher.
- Do not use detergents to clean the humidifier.
-
Unplug the humidifier.
- Note: If you’ve been using the warm mist setting, allow the humidifier to cool before cleaning.
-
Remove and rinse the water tank cover.
-
Remove the water tank from the base, and remove the mist channel and mist tube. [Figure 5.1] Pour out any water from the tank and base chamber. If you’ve used the warm mist setting, use caution in case the water is still hot.
Note: When pouring out water, hold down the float to ensure that it does not fall out of the base chamber. -
Remove the water filter from the tank by rotating it counterclockwise and lifting it out. [Figure 5.2]
-
Remove the water filter sponge from the water filter if necessary for cleaning.[Figure 5.3]
-
Detach the mist tube from the mist channel by twisting the tube counterclockwise. [Figure 5.1]
-
Remove the float, noise silencer, absorption pad, and aroma box from the base. [Figure 5.4]
-
Detach the outer water outlet valve from the tank by rotating it counterclockwise.[Figure 5.4]
-
Rinse all parts (except the outside of the base) with room temperature water.
-
To descale the humidifier (remove mineral buildup):
- a. Remove the water filter and the water outlet valve from the tank. Remove the noise silencer and absorption pad from the base. Keep the mist tube and mist channel in place.
- b. Fill the tank with 3 US cups / 710 mL of distilled white vinegar.
- c. Replace the tank cover and swish the vinegar around the tank.
- d. Place the tank on the base and soak for 15–20 minutes. Vinegar will drain into the base chamber and loosen scale (mineral buildup) in the tank and in the base chamber (including the transducer and float).
- e. Remove the tank, remove the tank cover, and pour out any vinegar.
- f. Remove the float from the base chamber by pulling up the larger side of the float and pulling the shaft out from the float brackets. One side of the float brackets is open (U-shaped) to allow the shaft to be removed. [Figure 5.5]
- g. Place the float, water filter, water outlet valve, aroma box, and noise silencer in a container. Fill with enough vinegar to cover them. Soak for 15–20 minutes.
- h. Use a soft cloth and the included cleaning brush to remove scale from all parts. [Figure 5.6]
- i. Rinse all parts until any vinegar smell is completely gone.
-
Dry all parts with a cloth. Make sure all parts are completely dry before reassembling or storing.
Cleaning the Aroma Pad & Absorption Pad
- Pull out the aroma box and remove the aroma pad. [Figure 5.7]
- Remove the noise silencer, then remove the absorption pad from on top of the heating element. [Figure 5.8]
- Rinse the pads under warm, running water.
- Dry the pads with a clean cloth.
- Place the aroma pad back into the aroma box.
- Place the absorption pad back into the base.
Note: Do not use liquid cleaners or detergents to clean the pads or any other part of the humidifier.
Replacing the Aroma Pad & Absorption Pad
- If the aroma pad or absorption pad is stiff even after cleaning, then it needs to be replaced. Extra pads are included with the humidifier.
- To maintain the performance of your humidifier, only use official Levoit aroma pads and absorption pads. For more information, contact Customer Support
Reassembling
- Place the float back into the base chamber: [Figure 5.9]
- a. Make sure the correct side of the float is facing up.
- b. Insert the smaller prong into the closed side of the float brackets.
- c. Place the larger prong into the open (U-shaped) side of the float brackets.
- Place the absorption pad and the noise silencer back over the heating element. [Figure 5.10]
- Screw the mist tube back onto the mist channel by twisting the tube clockwise. Place securely into place back over the base chamber. [Figure 5.10]
- Place the outer water outlet valve back onto the tank by rotating it. [Figure 5.11]
- Make sure the water filter sponge is securely placed inside the water filter. Place the water filter back into the tank and rotate it clockwise to secure it in place. [Figure 5.12]
- Refill the tank, if necessary. Place the tank properly on the base and place the tank cover on the water tank.
Storing
Follow the cleaning instructions (see page 16) and allow all parts to dry completely before storing. Store in a cool, dry location.
TROUBLESHOOTING
Problem Possible Solution
Humidifier doesn’t turn on, or turns off unexpectedly.| Plug the humidifier
into a working outlet and turn it on.
Add purified water to the water tank.
Little or no mist comes out.| Turn the mist level to a higher setting.
Fill the water tank.
There may be too much water in the base chamber. Empty the base chamber.
Refill the water tank (not the base chamber) and place the water tank properly
onto the base.
Make sure the air inlets on the bottom of the base and in the aroma box are
not blocked. The humidifier should not be set on carpet or other surfaces that
may block the air inlets.
Clean the humidifier (see Care & Maintenance, page 16). Make sure the
nozzles are not blocked or clogged.
Make sure the humidifier is on a level surface.
If the water tank or base was washed with detergent, rinse thoroughly with
clean water to remove any detergent.
Clean the water filter (see page 16) or replace the water filter sponge
with a new one. One replacement water filter sponge is included with this humidifier. For information on additional replacements, contact Customer Support (see page 27).
Humidifier uses water too quickly.| The humidifier uses up water based on the
environmental temperature and humidity. If your environment is cold and/or
dry, the humidifier will run out of water faster.
Using the warm mist function will use up water faster.
Humidifier produces an unusual smell.| If the humidifier is new, unplug and
rinse all parts, then place in a cool, dry place for 12 hours.
If essential oils were placed on the aroma pad, rinse the pad under clean
water and allow it to dry.
Clean the humidifier (see Care & Maintenance, page 16).
Problem Possible Solution
Humidifier makes a loud or unusual noise.| Make sure the water tank is
properly in place (see Getting Started , page 8).
Set mist level to a lower setting.
Empty the base chamber. Refill the water tank (not the base chamber) and place
the water tank properly onto the base.
When using the warm mist function, the heating element may make a gurgling noise if the water level is low. Add more water to the water tank.
The humidifier may be malfunctioning. Stop using the humidifier and contact
Customer Support (see page 27).
Mist leaks from the base.| Make sure the water tank is properly in place (see
Getting Started , page 8).
White dust appears around or in the humidifier.| ****
We recommend using purified to fill the humidifier. Avoid using water with high mineral content, such as tap water.
Clean the humidifier (see Care & Maintenance, page 16).
Water visibly leaks from the humidifier.| Avoid running the humidifier in a
room with over 60% relative humidity.
Wipe any excess water off the top and bottom of the base.
Do not shake the humidifier.
Make sure to place the humidifier on a flat, level surface.
Check the water tank for leaks. If there are leaks, contact Customer
Support (see page 27).
The area around the humidifier is damp or wet from condensation.| Humidity may
be too high. Turn down the mist level, turn off the humidifier, or open a door
or window to the room.
Open a window to ensure proper airflow for the humidifier, or move the
humidifier to a more well-ventilated room.
Make sure the water tank is properly in place (see Getting Started , page
8).
When replacing the water tank, wipe off excess water from the water tank and
base.
Problem Possible Solution
Mist is not warm after pressing .| ****
Allow the humidifier to heat up for about 15 minutes to produce warm mist.
Clean the heating element (see Care & Maintenance, page 16).
The mist is warm on the cool mist setting.| The heating element may still be
warm after being used for warm mist. Allow the heating element to cool for at
least 30 minutes.
Mold grows inside the humidifier.| Clean the water tank and base chamber
regularly (see Care & **Maintenance , page 16).
lights up red.| Fill the water tank.
Place the water tank properly on the base.
Clean the water filter (see page 16) or replace it with a new one. To request
a new water filter, contact Customer Support (see page 27).
Essential oil has little or no smell.| **
Add more essential oil. For best results, use pure essential oil.
Display shows an incorrect humidity percentage.| The room may be larger than
the humidifier’s effective range. Move to a room smaller than 430–753 ft² /
40–70 m².
Moisture may have built up inside the humidity sensor. Make sure the nozzles
are facing away from the aroma box so that mist does not settle on the sensor
inside the aroma box (see diagram in Getting To Know Your Smart Humidifier
, page 5). Turn off the humidifier, remove the aroma
box, and allow the sensor to air dry.
If the humidifier is placed within 12 inches / 30 cm of a wall or in a corner,
the humidity sensor cannot provide a proper reading for the relative humidity
in the room.
The humidity sensor will give an improper reading if it is exposed to dust.
Avoid using the humidifier in dusty rooms. Avoid using tap water in the
humidifier, as this can increase dust in the air.
The humidity level isn’t changing in my room.| ****
Use a higher mist level setting.
Depending on your environment, the humidifier may take longer to humidify your
air.
The room may be larger than the humidifier’s effective range. If the room is
larger than 430–753 ft² / 40–70 m², the humidifier will not be as effective.
Display shows Error Code “E1”, “E2”, “E3”, “E4”, or “E6”.| ****
The humidifier is malfunctioning. Contact Customer Support
VESYNC APP TROUBLESHOOTING
Why isn’t my humidifier connecting to the VeSync app?
- Make sure your phone has Bluetooth® turned on and is not currently connected to another Bluetooth device.
- During the setup process, you must be on a secure 2.4GHz Wi-Fi network. Confirm that the network is working correctly.
- Make sure the Wi-Fi password you entered is correct.
- Make sure your humidifier and phone are within 30 ft / 10 m of each other.
- Reset the humidifier by pressing and holding for 15 seconds. Then try connecting again.
My humidifier is offline.
- Make sure the humidifier is plugged in. The humidifier may appear to be offline if it is unplugged, or if the outlet does not have power.
- Refresh the VeSync menu by swiping down on the screen.
- Make sure your router is connected to the internet and your phone’s network connection is working.
- Reset the humidifier using one of these options:
- a. Delete the humidifier from the VeSync app. Swipe left (iOS®) or press and hold (Android), then tap Delete. Then reconfigure your humidifier with the VeSync app.
- b. Press and hold for 15 seconds. Then reconfigure your humidifier with the VeSync app.
- Note: Power outages, internet outages, or changing Wi-Fi routers may cause your humidifier to go offline.
- The VeSync app is displaying an incorrect humidity percentage while the humidifier is turned on.
- The room may be larger than the humidifier’s effective range. Move to a room smaller than 430–753 ft² / 40–70 m².
- Moisture may have built up inside the humidity sensor. Make sure the nozzles are facing away from the aroma box so that mist does not settle on the sensor inside the aroma box (see diagram in Getting To Know Your Smart Humidifier, page 5). Turn off the humidifier, remove the aroma box, and allow the sensor to air dry.
- If the humidifier is placed within 12 inches / 30 cm of a wall or in a corner, the humidity sensor cannot provide a proper reading for the relative humidity in the room.
- The humidity sensor will give an improper reading if it is exposed to dust. Avoid using the humidifier in dusty rooms.
- If your problem is not listed, please contact Customer Support
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
FCC RADIATION EXPOSURE STATEMENT
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
- This device complies with part 18 of the FCC Rules.
- This equipment generates and uses ISM frequency energy and if not installed and used properly, that is in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with limits for an ISM Equipment pursuant to part 18 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following:
- Reorient the receiving antenna of radio or television.
- Relocate the equipment with respect to the receiver.
- Move the equipment away from the receiver.
- Plug the equipment into a different outlet so that the equipment and receiver are on different branch circuits.
- Conduct only the user maintenance found in this manual. Other maintenance and servicing can cause harmful interference and can void the required FCC compliance. The manufacturer is not responsible for any radio or TV interference cause by unauthorized modification to the equipment. It is the responsibility of the user to correct such interference.
WARRANTY INFORMATION
Product | Smart Hybrid Ultrasonic Humidifier |
---|---|
Model | LUH-A602S-WUS |
For your own reference, we strongly recommend that you record your order ID
and date of purchase.
Order ID|
Date of Purchase|
Terms & Policy
-
Arovast Corporation (“Arovast”) warrants this product to the original purchaser to be free from defects in material and workmanship, under normal use and conditions, for a period of 2 years from the date of original purchase.
Arovast agrees, at our option during the warranty period, to repair any defect in material or workmanship or furnish an equal product in exchange without charge, subject to verification of the defect or malfunction and proof of the date of purchase. -
There is no other express warranty. This warranty does not apply:
-
If the product has been modified from its original condition;
-
If the product has not been used in accordance with directions and instructions in the user manual;
-
To damages or defects caused by accident, abuse, misuse or improper or inadequate maintenance;
-
To damages or defects caused by service or repair of the product performed by an unauthorized service provider or by anyone other than Arovast;
-
To damages or defects occurring during commercial use, rental use, or any use for which the product is not intended;
-
To damages or defects exceeding the cost of the product.
-
Arovast will not be liable for indirect, incidental, or consequential damages in connection with the use of the product covered by this warranty.
-
This warranty extends only to the original consumer purchaser of the product and is not transferable to any subsequent owner of the product regardless of whether the product is transferred during the specified term of the warranty.
-
This warranty does not extend to products purchased from unauthorized sellers. Arovast’s warranty extends only to products purchased from authorized sellers that are subject to Arovast’s quality controls and have agreed to follow its quality controls.
-
All implied warranties are limited to the period of this limited warranty.
-
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
-
If you discover that your product is defective within the specified warranty period, please contact Customer Support via support@levoit.com.
-
DO NOT dispose of your product before contacting us. Once our Customer Support Team has approved your request, please return the product with a copy of the invoice and order ID.
-
Every Levoit product automatically includes a 2-year warranty. To make the customer support process quick and easy, register your product online at www.levoit.com/warranty.
-
This warranty is made by:
-
Arovast Corporation
-
1202 N. Miller St. Suite A
-
Anaheim, CA 92806
CUSTOMER SUPPORT
- If you have any questions or concerns about your new product, please contact our helpful
- Customer Support Team.
- Arovast Corporation
- 1202 N. Miller St., Suite A
- Anaheim, CA 92806
- Email: support@levoit.com
- Toll-Free: 888-726-8520
- Support Hours
- Mon–Fri, 9:00 am–5:00 pm PST/PDT
- Please have your order invoice and order ID ready before contacting Customer Support.
ATTRIBUTIONS
-
Apple App Store is a trademark of Apple Inc.
-
Google, Android, and Google Play are trademarks of Google LLC.
-
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
-
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
-
iOS is a registered trademark of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
-
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Arovast Corporation is under license. Other trademarks and trade names are those of their respective owners.
-
LEVOIT
-
LEVOIT
-
LEVOITLIFESTYLE
-
LEVOITLIFESTYLE
-
LEVOITLIFESTYLE
Questions or Concerns?
- Please contact us Mon–Fri, 9:00 am–5:00 pm PST/PDT at support@levoit.com or at 888-726-8520.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>