FREECUBE AWP02L-N WiFi Smart Outlet Work with Alexa & Google Home Instructions
- June 6, 2024
- FREECUBE
Table of Contents
FREECUBE AWP02L-N WiFi Smart Outlet Work with Alexa & Google
Home
Function Key and Indicator Description
Short press the power button, red indicator lights up means power on, red
indicator lights off means power off.
Long press the power button for about 5 seconds, blue indicator flashes means
the product begin enter into the distribution network mode.
Blue indicator flashes slowly means the network connection is abnormal, please
check the router or network configuration.
Technical Parameters
Maximum current: 10A Rated voltage: 110-130V Rated power: 1200W（Max） Input voltage: 110-130V Wireless Type: Wi-Fi 2.4GHz Operating temperature: -10 ℃ – 50 ℃Support system: Android \IOS Turn On Intelligence
Software
The free “smart life” App is required to operate your Wi-Fi Smart Socket. It’s available on the App store and Google Play store for Android and IOS devices.
- Ensure your IOS / Android device is connected to the internet using a Wi-Fi network.
- Open the App store/Google Play store on your phone.
- Search for “smart life” in the App store/GooglePlay store.
- Download the “ smart life” App to your phone.
FCC statment
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provide with antenna
installation instructions and transmitter operating conditions for satisfying
RF exposure compliance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>