JADEMAR LIGHTING JLN-HAZ SERIES LED Linear Luminaire Instruction Manual

May 15, 2024
JADEMAR LIGHTING

JADEMAR LIGHTING JLN-HAZ SERIES LED Linear Luminaire

JADEMAR-LIGHTING-JLN-HAZ-SERIES-LED-Linear-Luminaire-
product

Product Information

Specifications

  • Product Name: JLN-HAZ SERIES
  • Type: Explosion Proof LED Linear Luminaire for Hazardous Locations
  • Operating Conditions: Suitable for ambient conditions not exceeding 50°C
  • Supply Voltage: Must match the rated luminaire voltage
  • Certifications: CUL listed and certified for wet locations

Installation Instructions

Ceiling Mount

Follow these steps for ceiling mounting:

  1. Refer to standard U-bracket dimensions for installation
  2. Assemble U-bracket components according to the provided instructions
  3. Alternatively, use triangle bracket dimensions and components for ceiling mounting
  4. Ensure the luminaire is tightly closed during operation

Wall Mount

For wall mounting, follow these steps:

  1. Open four holes in the wall with a diameter of 0.39″ (10mm) and a depth of 1.97″ (50mm)
  2. Align the mounting holes of the triangular bracket or U-bracket with the holes of the expansion screw
  3. Securely attach the luminaire to the wall using the provided brackets

FAQ

  • Q: Can this luminaire be used in temperatures above 50°C?
    • A: No, this luminaire is designed for operation in ambient conditions not exceeding 50°C.
  • Q: What type of wire should be used for input/output connections?
    • A: Use only UL or IEC-approved wire for input/output connections to ensure safety and compliance.
  • Q: Are there any serviceable parts in this product?
    • A: No, there are no serviceable parts in this luminaire. Do not attempt to open it for cleaning or maintenance.

JLN-HAZ EXPLOSION-PROOF LED LINEAR LUMINAIRE FOR HAZARDOUS LOCATIONS

WARNING

BEFORE YOU BEGIN

READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY

  • RISK OF ELECTRIC SHOCK: TURN POWER OFF BEFORE INSPECTION, INSTALLATION OR REMOVAL. PROPERLY GROUND ELECTRICAL ENCLOSURE. MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE RATED LUMINAIRE VOLTAGE.

  • RISK OF FIRE: FOLLOW ALL NEC AND LOCAL CODES. USE ONLY UL OR IEC APPROVED WIRE FOR INPUT/OUTPUT CONNECTIONS. DO NOT OPERATE IN AMBIENT
    TEMPERATURE ABOVE THAT INDICATED ON THE LUMINAIRE NAMEPLATE.

  • CUL LISTED AND CERTIFIED FOR WET LOCATIONS

    • THIS LUMINAIRE IS ACCEPTABLE FOR OPERATION IN AMBIENT CONDITIONS NOT EXCEEDING 50 ーC;
    • FOR SUPPLY CONNECTION, USE WIRES RATED FOR AT LEAST 90ーC;
    • NO SERVICEABLE PARTS” OR “NO USER SERVICEABLE PARTS. DO NOT OPEN FOR CLEANING.;
    • CAUTION – ʺTO REDUCE THE RISK OF IGNITION OF HAZARDOUS ATMOSPHERES, DISCONNECT THE LUMINAIRE FROM THE SUPPLY CIRCUIT BEFORE OPENING.
    • KEEP TIGHTLY CLOSED WHEN IN OPERATION.ʺ; THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED; “CAUTION RISK OF SHOCK” and “DISCONNECT POWER BEFORE SERVICING”.

INSTALLATION INSTRUCTIONS – CEILING MOUNT

JADEMAR-LIGHTING-JLN-HAZ-
SERIES-LED-Linear-Luminaire-fig \(1\) JADEMAR-LIGHTING-JLN-HAZ-SERIES-LED-Linear-Luminaire-fig
\(2\)

CEILING MOUNT

JADEMAR-LIGHTING-JLN-HAZ-SERIES-LED-Linear-Luminaire-fig
\(3\)

INSTALLATION INSTRUCTIONS – WALL MOUNT

WALL MOUNTJADEMAR-LIGHTING-JLN-HAZ-SERIES-LED-Linear-Luminaire-fig
\(6\)

  1. Use four M6×65 expansion screws to fix on the ceiling or wall, and install it with a triangular bracket, See Steps
    • Open four holes in the wall, the hole’s size is a diameter of 0.39” (10mm) and a depth of 1.97” (50mm).
    • Align the moun ng holes of the JLN-HAZ triangular bracket with the holes of the expansion screw.
  2. Open two holes in the wall according to the size in the picture.JADEMAR-LIGHTING-JLN-HAZ-SERIES-LED-Linear-Luminaire-fig \(9\)
    • Align the moun ng holes of the JLN-HZ U-bracket with the holes of the expansion screw.JADEMAR-LIGHTING-JLN-HAZ-SERIES-LED-Linear-Luminaire-fig \(10\)

INSTALLATION INSTRUCTIONS – DROP MOUNT

DROP MOUNTJADEMAR-LIGHTING-JLN-HAZ-SERIES-LED-Linear-Luminaire-fig
\(10\)

Use two M6×90 expansion screws with hooks to fix on the ceiling, and connect the U bracket through the iron chain, See Steps.

  • STEP 1:
    Open two holes in the wall according to the size in the picture.

  • STEP 2:
    Install the expansion screws with hooks in the holes.

  • STEP 3:
    Install Φ4 size stainless steel circular chain on the hooks.

  • STEP 4:
    Use M6 size lifing eye to install on U-bracket

  • Step 5:

    • Hang the lamp on the stainless steel chain.JADEMAR-LIGHTING-JLN-HAZ-SERIES-LED-Linear-Luminaire-fig \(15\)

Miami, FL USA –

FOR HAZLOC

Documents / Resources

| JADEMAR LIGHTING JLN-HAZ SERIES LED Linear Luminaire [pdf] Instruction Manual
JLN-HAZ, JLN-HAZ SERIES LED Linear Luminaire, JLN-HAZ SERIES, LED Linear Luminaire, Linear Luminaire
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

JADEMAR LIGHTING User Manuals

Related Manuals