decon MED3053 Azalea Assist Instruction Manual
- June 12, 2024
- decon
Table of Contents
Assembly instructions for Azalea Assist (Not Tall)
MED3053
MED3053 Azalea Assist
- Remove wheels on both sides.
- Check that the stop pin is as shown in the picture above, and that no anti-tip devices are fitted to the E-drive unit. Remember to use original anti-tip devices.
- Assembly the plate (right side) according to picture. For mounting on one side, the following must be included.
Item No. | Part Number | Qty | Description |
---|---|---|---|
1 | MED2000 | 1 | Bracket |
2 | XSM8BR | 1 | Plain Washer M8 |
3 | XSM8ML | 1 | Locknut M8 |
4 | XSM8X25 | 1 | Screw M8 x 25 |
5 | 100 400 017 | 1 | Spacer |
6 | HW069 | 1 | Hubsleever M16x1/12,7 |
7 | 405239 | 1 | Nordlock Washer M16 |
8 | XSM16FJ | 1 | Single Coil Washer M16 |
9 | XSM16M | 1 | Nut M16X1 Low |
10 | XSM12ML | 2 | Locknut M12 |
11 | XSM12BR | 2 | Washer Plain M12 |
12 | XSFM12X60 | 2 | Screw Countersunk M12 x 60 |
13 | MED1383R | 1 | Bracket(R=Right, L=Left) |
There are two options to assemble the bracket.
Mounting the Joystick
- Loosen the screws and place the bracket so that it is clamped between the plates, assemble, and tighten the new screws in the slot.
Item No. | Part number | Qty | Description |
---|---|---|---|
1 | MED1662 | 1 | Bracket Azalea Left |
2 | XOC-48160-B0 | 1 | SwingAway Bracket |
3 | XSM6X16 | 2 | Screw rounded M6 x 16 |
4 | XSM6ML | 2 | Lock nut M6 |
5 | XSM6BR | 2 | Plain washer M6 |
6 | XSM4X20 | 2 | Screw rounded M4 x 20 |
7 | XSM4BR | 2 | Plain Washer M4 |
MED1414R
Mounting the Joystick
- Loosen the screws and place the bracket so that it is clamped between the plates, assemble, and tighten the new screws in the slot.
Item No.| Part number| Qty| Description
---|---|---|---
1| MED1661| 1| Bracket Azalea Right
2| XOC-48160-B0| 1| SwingAway Bracket
3| XSM6X16| 2| Screw rounded M6 x 16
4| XSM6ML| 2| Lock nut M6
5| XSM6BR| 2| Plain washer M6
6| XSM4X20| 2| Screw rounded M4 x 20
7| XSM4BR| 2| Plain Washer M4
Mounting of Joystick with parallel arm
MED1647 right. MED1648 left.
- Loosen the screws and place the bracket so that it is clamped between the plates, assemble, and tighten the new screws in the slot.
Item No.| Part number| Qty| Description
---|---|---|---
1| MED1661| 1| Bracket Azalea Right
2| X0F-48160-D00| 1| Upper bracket paralell
3| XSM6X16| 2| Screw rounded M6 x 16
4| XSM6ML| 2| Lock nut M6
5| XSM6BR| 2| Plain washer M6
6| XSM4X20| 2| Screw rounded M4 x 20
7| XSM4BR| 2| Plain Washer M4
MED1356
Attendant control with Joystick controller ****
Item No. | Part Number | Qty | Description |
---|---|---|---|
1 | MED1317 | 1 | Bracket |
2 | XSM6X35 | 1 | Screw M6 x 35 |
3 | XSM6X16 | 2 | Screw M6 x 16 |
4 | XSM6BR | 3 | Plain Washer M6 |
5 | XSM6ML | 2 | Locknut M6 |
6 | MED1316 | 1 | Plate with pin |
7 | XA2-2612K-00 | 1 | Clamp with thread |
8 | XA2-2612E-00 | 1 | Clamp with hole |
-
Assemble the Attendant control with the Joystick control on any side. If you change side you must move (A) to the other side.
MED1226
Attendant control with attendant controller -
For the attendant control unit, you need these parts.
Item No| Part Number| Qty| Description
---|---|---|---
1| XSM6BRTG| 1| Torn washer
2| X-Klamma2| 1| Clamp 22 mm
3| XSM6X20| 1| Screw M6 x 20
4| XSM6BR| 1| Plain Washer
5| MED1200| 1| Assist control
MED1643
The attendant control is also possible to mount on the left side. For this you need MED1643 which is ordered separately.
Use either a bolt with position 4 or 5 depending on which clamp is mounted on the chair’s handle tube. The shorter one fits the sheet metal clip and the threaded aluminum clip, the longer aluminum clip without threads.
- For installation attendant control, the following must be included.
Item No.| Part number| Qty| Description
---|---|---|---
1| XSM6M| 1| Lock nut M6
2| XSM6BR| 1| Plain washer M6
3| XSM6BRTG| 2| Serrated lock washer M6
4| MED1640| 1| Bracket attendant control left side
5| MC6SM6X60| 1| Bolt M6x60
6| MC6SM6X35| 1| Bolt M6x35
7| MC6SM6X16| 1| Bolt M6x16 - Assemble the back placed battery bag.
- Assemble the extended brake parts.
Item No.| Part Number| Qty| Description
---|---|---|---
1| MC6SM5X35| 1| Screw Socket M5 x 35
2| 100 400 018| 1| Spacer - Assemble the back placed battery bag.
Unless otherwise specified, use the following tightening torque.
Metric coarse threads, steel.
Thread | Tightening torque |
---|---|
M3 | 1,2 Nm |
M4 | 3 Nm |
M5 | 6 Nm |
M6 | 10 Nm |
M8 | 25 Nm |
M10 | 50 Nm |
M12 | 85 Nm |
Sleeve.
Thread | Tightening torque |
---|---|
M16x1 | 30 Nm |
M18x1 | 40 Nm |
2023-02-24
Documents / Resources
|
decon MED3053 Azalea
Assist
[pdf] Instruction Manual
MED3053, MED2000, MED1383R, MED1414L, MED1662, MED1414R, MED1661, MED1647,
MED1648, MED3053 Azalea Assist, Azalea Assist, Assist
---|---