eufy SECURITY T7400 Smart Safe Device User Guide
- June 12, 2024
- eufy SECURITY
Table of Contents
eufy SECURITY T7400 Smart Safe Device
Product Information
The Smart Safe is a secure storage device with multiple unlocking options
including a keypad, fingerprint reader, and mechanical lock. It also features
a charging port, charging indicator, sync button, and LED light. The safe is
designed to be mounted on various surfaces and is equipped with a 2.4 GHz Wi-
Fi connection.
The Smart Safe is manufactured by Anker Innovations Limited and is protected
by trademarks. It comes with a 12-month limited warranty.
Product Usage Instructions
Step 1: Unlock Smart Safe
For the first time, you can unlock the Smart Safe using one of the
following options:
Option 1: Default Password
Enter the default password: 123456
Option 2: Backup Key
Use the backup key to unlock the Smart Safe.
Step 2: Add to the Eufy Security App
- Download and install the eufy Security app on your smartphone or tablet.
- Create an account and follow the on-screen instructions to complete the setup process.
- The default password (123456) will expire after setup. Use the eufy Security app to set a new password.
Step 3: Charge Smart Safe
Before using the Smart Safe, make sure to fully charge it using a 5V/2A
adapter. This may take approximately 2 hours.
Step 4: Mount Smart Safe (Optional)
If desired, you can mount the Smart Safe using the screw holes on the
bottom. Follow the instructions based on the type of surface:
Option 1: Wooden Surface
You will need a power drill, pencil, and screwdriver to mount the Smart
Safe on a wooden surface.
Option 2: Surfaces Made out of Hard Materials
You will need appropriate tools and equipment to mount the Smart Safe on
surfaces made out of hard materials.
Note : The battery life of the Smart Safe can last up to 6 months per
charge.
Customer Service
If you require assistance or have any inquiries, you can contact the customer service team:
- United States: +1 (800) 988 7973 (Mon-Fri 9AM-5PM PT)
- United Kingdom: +44 (0) 1604 936 200 (Mon-Fri 6AM-11AM GMT)
- Germany: +49 (0) 69 9579 7960 (Mon-Fri 6:00-11:00)
You can also email customer support at
[email protected].
Address : Anker Innovations Limited, Room 1318-19, Hollywood Plaza,
610 Nathan Road, Mongkok, Kowloon, Hong Kong Follow us on social media:
- Twitter: @EufyOfficial
- Instagram: @EufyOfficial
- Facebook: @EufyOfficial
OVERVIEW
-
Keypad
-
Fingerprint Reader
-
Mechanical Lock
-
Charging Port
-
Charging Indicator
-
SYNC Button
-
LED Light
SETUP
STEP 1. UNLOCK SMART SAFE
Two options are available for unlocking Smart Safe for the first time.
Option 1. Default Password
The default password “123456” will expire after setup. Use the eufy Security app to set a new password.
Option 2. Backup Key
STEP 2. ADD TO THE EUFY SECURITY APP
- Download and install the eufy Security app, then sign up for an account.
- Follow on-screen instructions to complete the setup.
The model T7400 supports 2.4 GHz Wi-Fi only. Make sure the Wi-Fi signal is strong
STEP 3. CHARGE SMART SAFE
Fully charge Smart Safe before first use. This may take 2 hours if you use a 5V/2A adapter.
The battery life can last up to 6 months per charge
STEP 4. MOUNT SMART SAFE (OPTIONAL)
You can mount Smart Safe through the screw holes on the bottom
Option 1. Wooden Surface
What you need:
Option 2. Surfaces Made out of Hard Materials
What you need
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired
operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following
measures: (1) Reorient or relocate the receiving antenna. (2) Increase the
separation between the equipment and receiver. (3) Connect the equipment into
an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an
experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
- The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm.
- Notice : Shielded cables
- All connections to other computing devices must be made using shielded cables to\ maintain compliance with FCC regulations.
The following importer is the responsible party
Company Name : POWER MOBILE LIFE, LLC
Address : 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone :1-800-988-7973
CUSTOMER SERVICE
Warranty
12-month limited warranty
Call Us
United States
+1 (800) 988 7973 Mon-Fri 9AM-5PM (PT)
United Kingdom
+44 (0) 1604 936 200 Mon-Fri 6AM-11AM (GMT)
Germany
+49 (0) 69 9579 7960 Mon-Fri 6:00-11:00
Email Us
Customer Support: [email protected]
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Limited. All rights reserved. eufy Security and eufy
Security Logo are trademarks of Anker Innovations Limited, registered in the
United States and other countries. All other trademarks are the property of
their respective owners