JADEMAR LIGHTING BLD-HM SERIES Emergency Backup Battery Driver Instructions
- June 9, 2024
- JADEMAR LIGHTING
Table of Contents
BLD-HM SERIES
EMERGENCY BACKUP
BATTERY DRIVER
FEATURES
- Listed for field installaA C22.2 NO.141
- Selectable emergency power 8W, 15W, 20W
- Universal input (100-347VAC)
- Constant output power (Auto-sensing output within each range)
- Output LVLE Compliant
- Baery protecer voltage protecoltage protec over temperature proteccuit protec
- RoHS compliant
SPECIFICATIONS
cULus Listed
For field or factory installation
Universal Input Voltage
100-347Vac, 50/60Hz
AC Input Current
100mA max.
AC Input Power Rating
12W max.
Output Voltage
170VDC
Output Power
8W / 15W / 20W
Illumination Time
≥90 Minutes
Test Switch/Charging Indicator Light
Low Voltage, Illuminated Test Switch
Battery
High-Temperature, Maintenance-Free Ni-MH battery, 5 Yr. Life Expectancy
Battery Charging Current
250mA
Recharge Time
≥24Hours
Temperature Rating (Ambient)
+5°C to +50°C (+41°F to +122°F)
Dimensions
15”x2.17”x1.3” (382mmx55mmx32mm);
17.7” (450mm) Flexible Conduit
Weight
3.2 lbs (1.45 kg)
Full Warranty
5 Years
APPLICATIONS
BLD-HM08D
- ≤80W (0-10V Dimmable Fixtures)
- ≤8W LED Lamps without dimming function
BLD-HM15D
- ≤150W (0-10V Dimmable Fixtures)
- ≤15W LED Lamps without dimming function
BLD-HM20D
- ≤150W (0-10V Dimmable Fixtures)
- ≤20W LED Lamps without dimming function
ORDERING
| Product Series | Description illi |
|---|---|
| BLD-HMO8D | 8W Emergency Backup Battery Driver 100-347Vac, Output 170VDC |
| BLD-HM15D | 15W Emergency Backup Battery Driver 100-347Vac, Output 170VDC |
| BLD-HM2OD | 20W Emergency Backup Battery Driver 100-347Vac, Output 170VDC |
DIMENSIONS
Case: 15”x2.24”x1.3” (mounting center – 14.4”) 
WIRING DIAGRAMS
WIRING DIAGRAM 1: For LED Driver with Input Power higher than Emergency
Output Power 0/1-10V Dimmable LED Driver + Dimmer Switch
Emergency Driver: DIM+ (Green) , Driver DIM- (Yellow). Have to
connect LED Driver DIM+ and DIM-
WIRING DIAGRAM 2: For LED Driver with Input Power higher than Emergency
Output Power 0/1-10V Dimmable LED Driver + Wall Switch
Emergency Driver: DIM+ (Green) , Driver DIM- (Yellow). Have to
connect LED Driver DIM+ and DIM-
WIRING DIAGRAM 3: For LED Driver with Input Power less than Emergency
Output Power Non-Dimmable LED Driver
IMPORTANT SAFEGUARDS
PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS
CAUTION: RISK OF SHOCK – disconnect emergency and normal input power
sources before servicing any equipment connected to this unit.
CAUTION: RISK OF FIRE OR ELECTRIC SHOCK – This emergency battery pack
installation requires knowledge of luminaire and electrical systems.
CAUTION: Servicing of this equipment should be performed by qualified
personnel only
CAUTION: Before installation, make certain the AC power to fixture is
off.
CAUTION: Verify that all replacement lamp types marked on the installed
luminaire are also identified as suitable for use with this emergency battery
pack.
CAUTION: Suitable for use in 5°C -50°C ambient temperatures.
CAUTION: Do not use outdoors. Do not mount near gas or electric heaters.
CAUTION: Equipment should be mounted in locations and at heights where it
will not be subjected to tampering by unauthorized personnel.
CAUTION: The use of accessory equipment not recommended by the
manufacturer may cause an unsafe condition The emergency battery pack is not
for in an air-handling fixture.
CAUTION: Do not use this equipment for other than its intended use.
IMPORTANT: An unswitched AC power source is required (100-347 VAC, 50/60
Hz). This device is designed for fixtures listed for dry and damp locations.
IMPORTANT: Customers are advised to charge emergency LED driver 24 hours
every 6 months during storage.
http://www.jademar.com
Miami, FL USA – info@jademar.com
T: 305.640.0465 – F: 305.640.0468
WWW.JADEMAR.COM
Informaontained herein is subject to change without notice.
Values are nominal.