VISUAL COMFORT ARN 1530 Lorna Extra Large Arc Floor Lamp Instruction Manual

VISUAL COMFORT ARN 1530 Lorna Extra Large Arc Floor Lamp

Product Information

Product Name: Lorna Extra Large Arc Floor Lamp
Item Number: ARN 1530
Product Features:

• Extra large arc design
• Bulb not included
• LED technology
• Complies with US safety standards (Listed)

Usage Instructions

1. Before starting assembly, ensure that you have read and understood all the safety instructions provided in the user manual.
2. Carefully remove all parts from the box and place them on a clean, soft surface.
3. Insert rod (F) into the lamp body (G).
4. Insert rod (E) into rod (F).
5. Remove the set screw (I) from the bottom of rod (G) using the provided tool.
6. Attach the lampshade or bulb holder to the top of the lamp body (G) according to the specific instructions provided with the lampshade or bulb holder.
7. If using a bulb, insert the appropriate bulb into the bulb holder. Make sure to follow the recommended wattage and type specified by the manufacturer.
8. Plug the lamp into a suitable power outlet.
9. Turn on the lamp using the switch or control mechanism provided.

Care Instructions

To clean the lamp, use only a soft dry cloth or feather duster.
Do not use abrasive or chemical agents, as they may damage the lamp’s surface or components.

Note: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with its construction and operation, as well as the hazards involved. Inspect the item and its contents carefully before installation. If any damage or defect is found, do not install the lamp. Retain all packaging material until installation is complete and approved.

ASSEMBLY INSTRUCTIONS

Lorna Extra Large Arc Floor Lamp
Item # ARN 1530

NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Insert rod (F) to lamp body (G), then insert rod (E) to rod (F).

3. Remove set screw (I) from bottom of rod (G) using provided screwdriver (J), then align notches on lamp body (G) to screws on base (H) and lock into place. Tighten set screw (I) using provided screwdriver (J).
   NOTE: If lamp body is loose after installation, remove and turn screws on base clockwise (making them shorter) then reinstall. Repeat this process as needed until lamp body is tight to base.

4. Remove switch knob (C) and socket ring (A) from socket (D), then install shade (B) to socket (D) and secure with socket ring (A).

5. Reinstall switch knob (C) to the socket (D).

6. Install light bulb into the socket.

7. Remove protective cover (K) from plug.

8. Plug into electrical outlet and test fixture.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>