AZUNO Digital Tire Pressure Gauge DTPG150A User Manual
- June 6, 2024
- AZUNO
Table of Contents
AZUNO Digital Tire Pressure Gauge DTPG150A User Manual
It is so important to keep tires pressure properly maintained, that is why we need a handy tire pressure gauge to check tire pressure quick and easy, and AZUNO will always be a trustworthy choice.
Acknowledgement
Thanks you for purchasing AZUNO digital tire pressure gauge, model DTPG150A
with hose or model DTPG150B.
Please ensure you read this user manual carefully prior to using this product
and follow the operational Instructions and guidelines correctly.
Please keep this user manual in a safe place for future reference.
Product description
Instructions for use
- First press the power button to turn on the digital tire pressure gauge.Then press the select button to choose the correct setting.
- Remove the tire valve cap, place the pressure gauge on the valve stem, and press down hard enough that the hissing sound disappears.
- Keep the connection for 3-5 seconds. Wait for the reading to become stable, and then read the results.
- If the pressure is too low, please inflate the tire in time If the pressure is too high, keep the connection stable while pressing the pressure release button to adjust the tire pressure.
- After use, remove the swivel chuck and reset the device by pressing the pressure release button.
- Do not forget to put the tire valve cap back on, and then press the power button to turn the gauge off.
Attention
Please read the Vehicle Safety Manual or Car Tire Pressure Standard Mark
before you adjust the tire pressure, and adjust it according to its actual
requirements.
Usage tips
- While the gauge is in use, hold it steady and still so that the result is accurate.
- When connecting and removing the gauge, there will be a small amount of air leakage, Which is normal.
- While using the pressure release button, pay attention that the deflation speed is not too fast.
- To ensure a good tight fit, do not disassemble this gauge too often.
- This product is an electronic digital pressure measuring device with precise sensors. Keep it away from water when using it, and store it in a dry place.
- If there is any abnormality when using this gauge, first check the air tightness to ensure that all parts are tightly connected. If it’s defective, please contact us for a solution.
- This product contains small parts and should be kept away from small children.
Warranty and Support
[email protected]
www.azunotools.com
Shenzhen Azuno Technology Co., Ltd
Prolinx GmbH
Brehmstr.56,40239 Duesseldorf Germany
Made in China
Read instructions first. Use with caution. Keep away from children.
Protect Your Purchase
Register Product on
azunotools.com
12 Months
Warranty Extension
15% OFF
For Your Next Purchase