rapidline CBT990 Square Meeting Table with Disc Base Instruction Manual
- May 15, 2024
- rapidline
Table of Contents
rapidline CBT990 Square Meeting Table with Disc Base
Product Specifications
- Product Code: CBT990
- Product Name: Square Meeting Table with Disc Base
Assembly Instructions
Time Required: 20 minutes
Tools Required: Screwdriver, Electric Drill,Pencil, Measuring tape/Ruler *Tools are not included.
Skill Required: Easy
The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.
Please note, as this is a commercial product, some intermediate skills are required. *No pre-drill holes or markings are provided on tops.
- Place the disc base on the floor.
- Attach the square meeting table top to the disc base using the provided screws and the electric drill.
- Flip the table right side up.
- Your table is now assembled and ready for use.
INSTRUCTION
Once Frame is complete, flip upside down onto bottom of table top and adjust
to cente.
Mark screw holes on table with pencil
Remove frame and pre-drill your screw holes
Replace frame onto top, upside down and screw the frame to the top.
Flip right side up and your table is complete.
FAQ:
Are assembly instructions included in the package?
Yes, detailed assembly instructions are included in the package for your convenience.
Can one person assemble the table alone?
While one person can assemble the table, it is recommended to have two persons for easier and quicker assembly.
Can the table be disassembled for moving?
Yes, the table can be disassembled following the reverse steps of the assembly instructions for easy moving.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>