rapidline CCT6 Disc Base Coffee Table Instruction Manual
- June 1, 2024
- rapidline
Table of Contents
rapidline CCT6 Disc Base Coffee Table
Specifications:
- Product Code: CCT6 – Coffee Table / RTB4 – Base Only
- Product Name: Disc Base Coffee Table
- Assembly Time Required: 20 minutes
- Tools Required: Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not included
- Skill Required: Easy
Product Usage Instructions
-
Step 1: Attach Bottom Disc to the Base
Attach the bottom disc to the base of the center pole. -
Step 2: Attach Top Disc to the Pole
Attach the top disc to the top of the pole. -
Step 3: Center the Top on Base and Attach Top
-
Center the top on the base and then attach the top using the indicated screws.
-
Note: It may be easier to do this upside down with the top on a soft surface and the frame centered upside down on the top. Use a pencil to mark the screw locations and pre-drill holes first if necessary.
Frequently Asked Questions (FAQ):
-
Q: What tools are required for assembly?
A: The tools required for assembly are a screwdriver, electric drill, pencil, and measuring tape/ruler. Please note that tools are not included with the product. -
Q: Is assembly a one-person job?
A: While assembly is rated as “Easy,” it is recommended that two persons work together for most products for ease and efficiency.
Assembly Instructions:
- Product Code : CCT6 – Coffee Table / RTB4 – Base Only
- Product Name: Disc Base Coffee Table
Specifications
-
Time Required:
20 minutes -
Tools Required:
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not included. -
Skill Required: The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.
NOTE
- As this is a commercial product, some intermediate skills may be required.
- No pre-drill holes or markings are provided on our table or desk tops.
- Please check you have all hardware before assembling.
- If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part and quantity.
- Please retain your receipt as proof of purchase to validate your warranty.
- Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
- Remove all wrapping materials, including staples and packing straps before you start to assemble
- Keep all hardware parts out of reach of children.
CAUTION
- Heavy product. Do not attempt to lift or move without help
- Do not tighten screws and bolts until completely assembled.
- Do not use this product unless all bolts and screws are firmly secured and tightened.
WARNING
- If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
- Failure to follow these warnings could result in serious injury.
Assembly Instructions
- Step 1. Attach Bottom Disc to the base of the centre pole
- Step 2. Attach top disc to top of the pole
- Step 3.
- Centre the top on base then attach top using screws indicated.
- Note: it may be easier to do this upside down with the top on a soft surface, and the frame centered upside down on the top.
- Use a pencil to mark the screw locations and pre-dill holes first if necessary