rapidline RMA4 BL Revolve Quad Monitor Arm Instruction Manual

rapidline RMA4 BL Revolve Quad Monitor Arm

Assembly Instructions

Product Code : RMA4
Product Name: Revolve Quad Monitor Arm

Time Required

15 minutes

Tools Required

Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler
*Tools are not included.

Skill Required

Easy Hard

The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.

NOTE

• As this is a commercial product, some intermediate skills may be required.
• No pre-drill holes or markings are provided on our table or desk tops.
• Please check you have all hardware before assembling.
• If you are missing any hardware, please contact your Rapidly reseller. Please ensure you have the name of the item, required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
• Assemble on a clean, at, smooth surface such as a rug or carpet to avoid parts from being scratched.
• Remove all wrapping materials, including staples and packing straps before you start to assemble
• Keep all hardware parts out of reach of children.

CAUTION

• Heavy product. Do not attempt to lift or move without help
• Do not tighten screws and bolts until completely assembled.
• Do not use this product unless all bolts and screws are firmly secured and tightened.

WARNING

• If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
• Failure to follow these warnings could result in serious injury.

Feature

• M4x12MM
  A( 16PCS)

• M5x12MM
  B (16PCS)

• M6x16MM
  C(3PCS)

• M6x10MM
  O(2PCS)

• ¢6.5x¢13×2
  E(32PCS)

• 4X4MM
  F(1 PCS)

• 5X5MM
  G(1 PCS)

1. Tube Cover (2PCS)
2. TV plate (2PCS)
3. Tube (1 PCS)
4. Bottom support (1 PCS)
5. Knob (1 PCS)
6. Anti-slip rubber (2PCS)
   

STEP 1
Fitting the bottom support on the desk

STEP 2
Install TV plate

Warning

Make sure the handle here is tightly locked before hang up the screen

STEP 3
Attaching screen to TV plate

Increase washer (E) based on actual situation!

STEP4

Adjusting Screen

To a1djust the monitor with the supplied Sx5 Allen key(G)

CAUTION

This p1oducl contains small it ends hat could be a evoking hazard If swallowed. Keep these items away from young emit draft.

• Make ~,e these inSlroC1iOns are ,up and C<Politely under Shod before acumen)1ing ins1a11a11on.lf you ate unsure 01 any part of this lnstallation art, please eon, urate a ptoreuiot1al Installer rraup standee.
• The Clicker Mooning surface must be cap Adie of supporting !he eon Mined weight 01 the mount at1d lie display. other twice the structure must be reinforced.
• please cheek join parts /Nery law<> mold’ ethyl, Making suet the screws are lo Senior not.

This p product was designed to be 1ns1.auecs on desk. Before i Metaling. make suet the mount wall sept)Ort the combined 1oac1 or the equipment arts h arid ware .Never exceed 1M mall(into load capacity 10 KG, orals it may results in produit: route or personal injury.

Note. this product Is Intended for indoor use only. Use or lulls produce outdoors could lead 10 p, duct rarer Ronal inju1y.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>