rapidline Vesta Mesh Back Chair Instruction Manual
- May 15, 2024
- rapidline
Table of Contents
rapidline Vesta Mesh Back Chair
Specifications
Product Code | VESTA BL |
---|---|
Product Name | Vesta Mesh Back Chair |
Time Required | 20 minutes |
Tools Required | Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler |
Tools Included | No |
Skill Required | Easy (Rated 1 out of 5 on Assembly Skill Rating) |
The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product, with 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.
Important Notes
- As this is a commercial product, some intermediate skills may be required.
- No pre-drill holes or markings are provided on our tables or desktops.
- Please check you have all the hardware before assembling.
- If you are missing any hardware, please contact your Rapidline reseller. Ensure you have the name of the item, required hardware part and quantity.
- Please retain your receipt as proof of purchase to validate your warranty.
- Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
- Remove all wrapping materials, including staples and packing straps before you start to assemble.
- Keep all hardware out of reach of children.
- Heavy product. Do not attempt to lift or move without help.
- Do not tighten screws and bolts until completely assembled.
- Do not use this product unless all bolts and screws are firmly secured and tightened.
- If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
- Failure to follow these warnings could result in serious injury.
Hardware included
- 4x (1/4″x25mm) for Back of Armrest
- 4x (M6x30mm) for Seat of the Armrest
- 4x Washer for Mechanism & Seat of Armrest
- 4x Cores for Arm Screw
- 1x (52565mm) Hexangular key
Assembly Steps
- Attach the Gas Lift to the Base & Castors.
- Place the Gas Lift Plastic Cover over the Gas Lift.
- Attach the Armrests to the Back of the chair using the provided screws.
- Attach the Seat of the Armrest to the Mechanism & Seat.
- Complete the assembly by securing all parts together and tightening all screws and bolts.
FAQ
- What if I’m missing hardware from my kit?
- Contact your Rapidline reseller with the item name, required hardware part, and quantity.
- How do I validate my warranty?
- Retain your receipt as proof of purchase to validate your warranty.
- Can I assemble the chair on any surface?
- It is recommended to assemble on a clean, flat, smooth surface like a rug or carpet to prevent scratches.
- Should I fully tighten the screws and bolts during assembly?
- Do not fully tighten screws and bolts until the chair is completely assembled.
Assembly Instructions
- Product Code: VESTA BL
- Product Name: Vesta Mesh Back Chair
Time Required
- 20 minutes
Tools Required
- Screwdriver
- Electric Drill
- Pencil
- Measuring tape/Ruler
- Tools are not included.
Skill Required
- Easy Hard
- The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product.
- With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.
NOTE
- As this is a commercial product, some intermediate skills may be required.
- No pre-drill holes or markings are provided on our tables or desktops.
- Please check you have all the hardware before assembling.
- If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part and quantity.
- Please retain your receipt as proof of purchase to validate your warranty.
- Assemble on a clean,, smooth surface such as a rug or carpet to avoid parts from being scratched.
- Remove all wrapping materials, including staples and packing straps before you start to assemble
- Keep all hardware parts out of reach of children.
CAUTION
- Heavy product. Do not attempt to lift or move without help
- Do not tighten screws and bolts until completely assembled.
- Do not use this product unless all bolts and screws are firmly secured and tightened.
WARNING
- If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
- Failure to follow these warnings could result in serious injury.
PARTS
TOOLS
- X4 (1/4″x25mm) for Back of Armrest
- X4 (M6x30mm) for Seat of Armrest
- X4 Washer for Mechanism & Seat of Armrest
- X4 Cores for Arm Screw
- X1 (52565mm) Hexangular key
Installation Instructions
FINAL
Documents / Resources
|
rapidline Vesta Mesh Back
Chair
[pdf] Instruction Manual
Vesta Mesh Back Chair, Mesh Back Chair, Back Chair, Chair
---|---
Read User Manual Online (PDF format)
Loading......