rapidline PU605H High Back Chair Instruction Manual

rapidline PU605H High Back Chair

Product Information

Specifications:

• Product Code : PU605H
• Product Name : PU605H High Back Chair

Product Usage Instructions

Assembly Instructions:

Time Required: 10 minutes
Tools Required: Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler (*Tools are not included)
Skill Required: Easy
The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.

1. Seat: Attach the bottom of the seat with bolts provided.
2. Arms: Insert arms into the designated slots.
3. Mechanism: Assemble the mechanism according to the provided instructions.
4. Star Base: Connect the starbase to the seat structure securely.
5. Gas Lift: Install the gas lift properly for height adjustment.
6. Tools: Use the screwdriver, electric drill, pencil, and measuring tape/ruler for assembly.

FAQ

• Q: How do I adjust the height of the chair?
  A: To adjust the height of the chair, use the gas lift mechanism provided. Simply lift or press down on the chair while seated to achieve the desired height.

• Q: Can I assemble the chair alone?
  A: While it is possible to assemble the chair alone, it is recommended to have two persons for easier and quicker assembly, especially when handling certain parts like the seat and star base.

Assembly Instructions:

• Product Code: PU605H
• Product Name: PU605H High Back Chair

Time Required:

• 10 minutes

Tools Required:

• Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not included.

Skill Required:

The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert.
For most products, two persons are recommended.

NOTE

• As this is a commercial product, some intermediate skills may be required.
• No pre-drill holes or markings are provided on our table or desktops.
• Please check you have all the hardware before assembling.
• If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part, and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
• Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
• Remove all wrapping materials, including staples and packing straps before you start to assemble
• Keep all hardware parts out of reach of children.

CAUTION

• Heavy product. Do not attempt to lift or move without help
• Do not tighten screws and bolts until completely assembled.
• Do not use this product unless all bolts and screws are firmly secured and tightened.

WARNING

• If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
• Failure to follow these warnings could result in serious injury.

PARTS

INSTALLATION

CHAIR CARE

• Clean regularly.
• Use leather cleaner where leather is applicable.
• Test on concealed area before proceeding

PLEASE NOTE

• This is a chair for one person to sit on. Do not stand on.
• The bolts may require tightening periodically.

1. Insert gas lift into the base with castors
2. Attach the deat mechanism onto the bottom of the seat with bolts provided
3. Push gas-lift down and insert it into the slot unde

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>