rapidline MW1812 Standard Mobile Whiteboards Instruction Manual
- October 30, 2023
- rapidline
Table of Contents
MW1812 Standard Mobile
Assembly Instructions:
Product Code : MW1812 / MW189 / MW1512 / MW15960 / MW129
Product Name: Standard Mobile Whiteboards
Time Required: 25 minutes
Tools Required: Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not included.
Skill Required: Easy Hard
The Assembly Skill Rating is a 5-point system that shows the degree of effort
needed in assembling a specific product.
With 1 being easy for the average person and 5 requiring an expert. For most
products, two persons are recommended.
NOTE
• As this is a commercial product, some intermediate skills may be required.
• No pre-drill holes or markings are provided on our table or desk tops.
• Please check you have all hardware before assembling.
• If you are missing any hardware, please contact your Rapid line reseller.
Please ensure you have the name of the item,
required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
• Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid
parts from being scratched.
• Remove all wrapping materials, including staples and packing straps before
you start to assemble
• Keep all hardware parts out of reach of children.
CAUTION
• Heavy product. Do not attempt to lift or move without help
• Do not tighten screws and bolts until completely assembled.
• Do not use this product unless all bolts and screws are firmly secured and
tightened.
WARNING
• If parts are missing, broken, damaged or worn stop using the product until
all repairs are made.
• Failure to follow these warnings could result in serious injury.
Note: After assembly, remove the protective film from both sides of the
board.
Cleaning Tip: A mild dish washing liquid can be used with a soft cloth to
clean the writing surface
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>