rapidline ERGO MIDI Ergonomic Operator Office Chair Instruction Manual
- May 15, 2024
- rapidline
Table of Contents
rapidline ERGO MIDI Ergonomic Operator Office Chair
Time Required
15 minutes
Tools Required
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not included.
Skill Required
The Assembly Skill Rating is a 5-point system that shows the degree of effort
needed in assembling a specific product. With 1 being easy for the average
person and 5 requiring an expert. For most products, two persons are
recommended.
Please note, as this is a commercial product, some intermediate skills are
required.
*No pre-drill holes or markings are provided on tops.
NOTE
- As this is a commercial product, some intermediate skills may be required.
- No pre-drill holes or markings are provided on our table or desk tops.
- Please check you have all hardware before assembling.
- If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part and quantity.
- Please retain your receipt as proof of purchase to validate your warranty.
- Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
- Remove all wrapping materials, including staples and packing straps before you start to assemble
- Keep all hardware parts out of reach of children.
CAUTION
- Heavy product. Do not attempt to lift or move without help
- Do not tighten screws and bolts until completely assembled.
- Do not use this product unless all bolts and screws are firmly secured and tightened.
WARNING
- If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
- Failure to follow these warnings could result in serious injury
PARTS LIST
KEY QTY| DESCRIPTION| KEY| QTY| DESCRIPTION| KEY
QTY| DESCRIPTION
---|---|---|---|---|---|---
1| 5| Caster| 7| 1| Backrest| 13| MS Size Allen Wrench
2| 1| Base| 8| 1| Backrest Post| 14| M6 Size Allen Wrench
3| 1| Seat Post| 9| 1| Backrest Post Screw| 15| Air Pump
4| 1| Seat Post Cover (Optional)| 10| 6| Mechanism Screw| 16| Air Pump Holder
(optional)
5| 1| Mechanism| 11| 1| Backr Tight Bolt| TORQUE SETTINGS TO FIX ALL BOLTS:
1.6Nm
6| 1| Seat| 12| 1| Backrest Bellow|
ASSEMBLY INSTRUCTIONS
STEP 1.
STEP 2.
STEP 3.
STEP 4.
MECHANISM INSTRUCTIONS:
A Pneumatic seat height adjustment
B Seat angle adjustment : Seat angle adjusts independently with a
single lever.
C Backrest angle adjustment : Back angle adjusts independently with a
single lever.
D Pull handle bar up , allows seat to slide forward and backward .
Release handle bar to lock desired seat position.
ATTENTION
- THIS ASSEMBLY INSTRUCTION IS ONLY FOR ASSEMBLING THE CHAIR. THE CHAIR DRAWING MAY BE DIFFERENT FROM CHAIR APPEARANCE.
- SOME SCREWS MAY PREASSEMBLED, ASSEMBLERS CAN IGNORE THE STEP.
- REMOVE ALL ITEMS FROM THE CARTON. VERIFY ALL PIECES BEFORE ASSEMBLY
PREVENTIVE MAINTENANCE AND WARNING!
- IF ANY PARTS ARE MISSING, BROKEN, DAMAGED OR WORN, STOP USE OF THE PRODUCT UNTIL REPAIRS ARE MADE USING FACTORY AUTHORIZED PARTS.
- DISPOSE OF PACKAGING PROPERLY.
- FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
- EVERY SIX MONTHS, PLEASE MAKE SURE ALL BOLTS, SCREWS AND KNOBS ARE FULLY TIGHTENED TO ENSURE STABILITY.